最新九年级物理知识点归纳优秀名师资料.doc
《最新九年级物理知识点归纳优秀名师资料.doc》由会员分享,可在线阅读,更多相关《最新九年级物理知识点归纳优秀名师资料.doc(27页珍藏版)》请在三一文库上搜索。
1、九年级物理知识点归纳第十章 多彩的物质世界 D(用公式=m/V求出盐水的密度= 一、宇宙和微观世界 质子 2、测量石块密度的实验步骤中 原子核 器材:天平、砝码、量筒、水、石块、细线 宇宙 物质 分子 原子 中子 A(用天平测出石块的质量为m 核外电子 B、往量筒里倒入适量的水,记住此时读数为V1 二、质量 C、让石块完全浸没在量筒的水中,读出量筒中水的体积V2 1、定义:物体所含物质的多少2、单位:千克(kg) 常用:克(g)、毫克 (mg)、吨(t) D、用公式=m/V求出盐水的密度= 3-3-633、单位的换算关系: 1kg=10g 1mg=1og=10kg 1t=10kg 4、测量工具
2、 :天平 种类:托盘天平和学生天平5、天平的使用方法 3、测定密度小于水的一大块石蜡的密度。 (1)天平的调节:1)把天平放在水平台上. (一放平,二回零,三调横梁成水平.) 2)把游码放在标尺左端的零刻线上 3)调节横梁右端的平衡螺母,使指针指在分度盘的中央刻度线器材有:小天平、砝码、量筒、水、金属块、细线。(也可以用大头针) 处,这时横梁平衡. A、用量筒测出石蜡的质量为m (2)天平的使用:4)估计被测物体的质量 B、在量筒中加入适量的水,让金属块浸没在水中,记下体积为V1 5)把被测物体放在左盘里,用镊子向右盘里从大到小试加砝码,调节游码在标 C、把金属块与石蜡用细线捆绑在一起,完全浸
3、没在水中,用量筒测出 尺上的位置,直到横梁恢复平衡.6)被测物体的质量=盘中砝码的总质量+游码在标尺上所对的刻 总体积为V2 值。(称物体,先估计,左物右码方便自己。增减砝码用镊子,移动游码平高低。) D、被测石蜡的密度= (3)使用天平的注意事项: 1)被称物体不能超过天平的最大称量.(即测量范围) 2)用镊子加减砝码,不能用手接触砝码,不能弄湿、弄脏砝码。 3)潮湿物体和化学药品不能直接4、测量牛奶的密度 器材:天平、空瓶、水、牛奶 放到天平盘中。 A(用天平测出空瓶的质量为m 三、密度 符号: 0B、往空瓶倒满水,用天平测出瓶和水的总质量m 、物理意义: 11密度是表示 同种物质的质量与
4、体积的比值一定;不同物质,比值不同的性质的物理量. C、把水全部倒掉,再把牛奶装满空瓶,用天平测出瓶和牛奶的质量为m2 2、定义:单位体积某种物质的质量叫这种物质的密度 D(用公式=m/V求出 牛奶的密度= 3、公式: 3 34、单位主单位:千克/米常用单位:克/厘米 33 3五、利用弹簧测力计测定物质的物度(利用浮力知识) 5、单位间的换算关系:1克/厘米= 10千克/米 333 2(710 kg/m = 2.7 g/cm1、测石块的密度:器材:弹簧测力计、水槽、细线 6、常见物质的密度值: 333水的密度是1.010 kg/m, 表示的意思是 每立方米的水的质量是1.010千克. A、用弹
5、簧测力计石块的重力为G 7、性质:密度是物质的一种 属性 , 同各物质, 密度值 一定 ,不同的物质密度值 B、让石块完全浸没在水槽的水中,记住弹簧测力计此时读数为F 拉一般不同 .质的密度值是由 物质本身 决定, 跟 质量、体积、形状、位置 无关. C、根据称量法F= G-F 浮拉8、应用:(1)据m = v 可求物体的质量。 D、根据阿基米德原理:F=Vg 得 V=V= 浮排水物排(2)可鉴别物质。(可以用比较质量、体积、密度等三种方法) (3)可据v = m /求物体的体积。 E、石= 四、常规法测物体的密度 1、测量盐水密度的实验步骤中:器材:天平、砝码、量筒、烧杯、盐水 A(往烧杯倒
6、入适量的盐水,用天平测出杯和盐水的总质量m1 B、把烧杯中的一半的盐水倒入量筒中,用天平测出杯和剩下盐水的质量为m2 2、测某种液体的密度:器材:弹簧测力计、量筒、铁块、水、细线 C(读出量筒中盐水的体积V urban area 2.5.2 Yibin city in Yibin city, according to resource and environment characteristics Urban population and urban spatial distribution, spatial distribution of industries, major infrastr
7、ucture Corridor layout, combined with the future development trend of synthetic judgments, planning, urban spatial structure of urban system can be summarized as: a pole along the two axes. A refers to the metropolitan area along the Yangtze River, is the core area of the development of the city. Pl
8、ans to build for the Yangtze River economic belt on the pillar, advancing along the . Guanghe River, Yiliang, prestige of the external cohesion of zhaotong, Yunnan, internal connecting Yibin city to the North. The Sichuan-Yunnan-Guizhou border area of Yibin, in the city of zhaotong, liupanshui three
9、, zhaotong city, the most populous and most extensive regions, the most economically backward, to the North in Wumeng mountain area of yanjin, shuifu, suijiang counties radiation power is relatively weak. Yibin city and infrastructure in such areas should be strengthened and docking, extending south
10、ward to public services, promote the development of mineral resources in Northeast Yunnan, expand our economic hinterland, driving synchronous lifting in Sichuan-Yunnan-Guizhou border area. This urban axis with mineral resource advantages, focus on the development of advanced technology, comprehensi
11、ve utilization of resources of higher energy, new building materials, chemical industry, developing new energy and mining towns. Urban space organization-in gongxian County, Gao, junlian County Center for area organizations, improve, Gao, Gong, junlian County comprehensive services, and promoting re
12、gional economic development and population growth of the agglomeration. Along the main traffic arteries to implement point-axis development mode key repeatedly, Shahe town, Xiao Zhen, Luo table Zhen, Luo town, love Mu Zhen and other towns as district development focuses on cities and towns, promote
13、the development of district A、用弹簧测力计铁块的重力为GB、往量筒里倒入适量的该种液体,记住此时读数为V 当v不变时,s与t成正比;使用注意:单位统一,物理量一一对应 1C(让铁块完全浸没在该种液体中,读出量筒中水的体积V,弹簧测力计此时读数为F (4)单位:主单位:米/秒 (m/s)常用单位:千米/时(km/h)进率换算:1 m/s=3.6 km/h 2拉D( V= V-V 根据称量法:F= G-F 3、运动的种类 排2 1 浮拉(1)匀速直线运动: 物体沿直线快慢不变的运动, 是最简单的机械运动。 E、根据阿基米德原理:F=Vg得 = 浮排液液其快慢用速度表示
14、,其特点是:物体运动方向不变;速度大小不变。 S总六、天平在使用过程中读数偏差问题 = (2)变速运动: 物体快慢发生改变的运动.其快慢用平均速度来表示V平均t总读数大于物体实际质量的1、游码忘记调零,但横梁是平衡的,就直接对物体称量 平均速度不能表示物体某一时刻或某一位置运动的快慢,它只能表示运动物体大致的快慢程度,因此在描述平均速度时,一定要说清是某段路程或是某段时间的平均速度。 2、调节好天平后,测量时,物体与砝码的位置互相放错了3、调节好天平后,所用的砝码有破三、长度、时间及其测量 损 1、时间t :(1) 单位:时(h)、分(min)、秒(s)(2) 进率关系:1 h =60 min
15、 = 3600 s (3) 测量工具:钟表 读数小于物体实际质量的1、调节好天平后,所用的砝码生锈了 2、长度l :(1)单位:米(m) 分米(dm) 厘米(cm) 毫米(mm) 千米(km)微米(u m) 纳米(n m ) 2、调节好天平后,所用的砝码上沾有灰尘,或者有小水珠 69333(2)进率关系:1m=10 dm=100 cm= 1000mm=10 um=10 nm 1km=10m 1 mm=10 um 1 um=10 nm (3)常用的测量工具:刻度尺 第十一章 运动和力 使用方法:A、观察刻度尺的零刻度线、量程和分度值。B、让刻度尺带刻度的边缘与被测长度紧贴,一 运动的描述: 放置
16、。 沿被测长度,、机械运动 C、读数时视线要与尺面垂直,读到分度值的下一位。D、记录结果由数字和单位组成。 运动是宇宙中的普遍现象。在物理学里,我们把物体位置的变化叫机械运动。 (4) 一些特殊的测量方法: 2、参照物 A、积小成多 B、化曲为直C、对特殊的长度使用直尺和三角板组合 (1)定义:描述物体的运动,判断一个物体的运动情况(是运动,还是静止),需要选定一个物体3、误差 作为标准,这个被选作标准的物体叫做参照物。 (1)定义 测量值与真实值之间的差异,叫误差(2)产生原因: 误差的产生与测量工具和测量人有关。 (2)判断运动情况的方法:如果物体相对于参照物的位置发生了变化,我们就说物体
17、是运动的;(3)与错误不同: 误差是不能避免的,只能减少。错误是可以避免的. 如果物体相对于参照物的位置没有发生变化,我们就说物体是静止的。 (4)减少误差的测量方法有:使用精密的测量工具或多次测量取平均值。 (3)注意:研究或描述物体的运动情况不能没有参照物;参照物可以选取任何物体,但不能选被四、力(F) 研究的物体本身;为了方便,我们常选地面或相对于地面静止的物体为参照物。 1、定义:力是物体对物体的作用,物体间力的作用是相互的。 3、运动和静止的相对性:一切物体时刻都在运动,静止的物体是不存在的,日常所说的运动和静止注意(1)一个力的产生一定有施力物体和受力物体,且同时存在。 是相对参照
18、物而言的。参照物选取的不同,同一物体的运动状况也会不同。常说的静止或不动的物(2)单独一个物体不能产生力的作用。 体相对于地面来说是静止的,运动方向、运动快慢相同两个物体,它们彼此也是相对静止的。 (3)力的作用可发生在相互接触的物体间,也可以发生在不直接接触的物体间。 二、运动的快慢 2、 判断力的存在可通过力的作用效果来判断。 1、比较运动快慢的方法:(1)路程相同,比较时间的长短。(2)时间相同,比较路程的长短。 力的作用效果有两个: (3)比较速度的大小。 (1) 力可以改变物体的运动状态。(运动状态的改变是指物体的速度大小和运动方向发生改变)。 2、速度(V) 举例:用力推小车,小车
19、由静止变为运动;守门员接住飞来的足球 (1)物理意义:速度是表示运动快慢的物理量(2)定义:运动物体单位时间内通过的距离叫速度。 (2)力可以改变物体的形状举例:用力压弹簧,弹簧变形;用力拉弓弓变形 Ss(3)公式: V= 变形得t = S=V t 3、力的单位:牛顿(N) vt4、力的三要素:力的大小、方向、作用点称为力的三要素。它们都能影响力的作用效果。 v-速度- 米/秒 S-路程-米 t-时间-秒 5、力的表示方法:画力的示意图。在受力物体上沿着力的方向画一条线段,在线段的末端画一个公式意义:当s不变时,v与t成反比;当t不变时,v与s成正比; th of the agglomerat
20、ion. Along the main traffic arteries to implement points, improve, Gao, Gong, junlian County comprehensive services, and promoting regional economic development and population growin gongxian County, Gao, junlian County Center for area organization-veloping new energy and mining towns. Urban space o
21、rganizationf advanced technology, comprehensive utilization of resources of higher energy, new building materials, chemical industry, deGuizhou border area. This urban axis with mineral resource advantages, focus on the development o-Yunnan-hronous lifting in Sichuanblic services, promote the develo
22、pment of mineral resources in Northeast Yunnan, expand our economic hinterland, driving syncto pu power is relatively weak. Yibin city and infrastructure in such areas should be strengthened and docking, extending southwardregions, the most economically backward, to the North in Wumeng mountain area
23、 of yanjin, shuifu, suijiang counties radiation Guizhou border area of Yibin, in the city of zhaotong, liupanshui three, zhaotong city, the most populous and most extensive -Yunnan-r, Yiliang, prestige of the external cohesion of zhaotong, Yunnan, internal connecting Yibin city to the North. The Sic
24、huane Rivethe development of the city. Plans to build for the Yangtze River economic belt on the pillar, advancing along the . Guanghsummarized as: a pole along the two axes. A refers to the metropolitan area along the Yangtze River, is the core area of an be ayout, combined with the future developm
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 最新 九年级 物理 知识点 归纳 优秀 名师 资料
链接地址:https://www.31doc.com/p-1407602.html