αβ探头适配电路设计及性能研究.doc
《αβ探头适配电路设计及性能研究.doc》由会员分享,可在线阅读,更多相关《αβ探头适配电路设计及性能研究.doc(5页珍藏版)》请在三一文库上搜索。
1、探头适配电路设计及性能研究Abstract: An / probe adaptor circuit is the core part of an / particle measurement system, which directly affects the performance of the system in measuring the activity of and particles. In this paper, an / probe adaptor circuit is designed for the / particle measurement system, includ
2、ing shaping filter circuit, integral circuit and discriminant circuit. In order to study the performance of the adaptive circuit, the output waveforms of the shaping filter, integral and discriminant circuits are tested. The experiment shows that the circuit has excellent performance and can convert
3、 the analog signal from the probe into digital signal to realize the counting of and particles. Keywords: / particle measurement system; / probe adaptor circuit; screening circuit; output waveform 粒子与粒子具有穿透能力较弱和电离能力较强的特点,对体内组织破坏能力较大,严重威胁着人体健康。在加强核安全监管的大力推动下,实现高效准确地测量物体表面和环境粒子和粒子具有重要意义。而作为核设施监测、核事故应急
4、事件监测和环境放射性污染调查与评价等领域中的重要技术支撑/粒子测量系统已成为研究热点1。 在/粒子测量系统中,/探头适配电路直接影响着系统对粒子和粒子的活度测量性能,是系统核心部分。本文针对/粒子测量系统设计了/探头适配电路,包括整形滤波电路、积分电路、甄别电路、偏压电源,并测试了适配电路各项性能指标,力求为新型/粒子测量系统的先导性研发提供进一步参考。 1 探头适配电路设计 1.1 整形滤波电路设计 为提高/探头的时间分辨能力,本文设计整形滤波电路以减小输出信号脉冲宽度,避免粒子活度较高时导致脉冲堆积现象的发生,影响测量数据的准确性,整形滤波电路原理见图1。输出信号首先经过CR微分电路整形后
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 探头 配电 设计 性能 研究
链接地址:https://www.31doc.com/p-1581412.html