设备监理单位资格基本要求.doc
《设备监理单位资格基本要求.doc》由会员分享,可在线阅读,更多相关《设备监理单位资格基本要求.doc(9页珍藏版)》请在三一文库上搜索。
1、编 号:CAPEC-S111:2003版本号:A修改号:0状 态:有效发放号:设备监理评审管理文件设备监理单位资格基本要求 设备监理工作协调管理办公室Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the ori
2、ginal 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in t
3、he middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, locati
4、on, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installatio
5、n of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements shoul
6、d be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and hangers part plant product quality certificate for each variable spring supports, constant support hangers, dampers, damper function
7、, there should be factory calibrated test发布日期:2003年11月14日 实施日期:2003年11月15日版次:A CAPEC-S111:2003 共 7页修改:0 设备监理单位资格基本要求 第 7 页设备监理单位资格基本要求1、总则1.1 范围 本文件规定了在中华人民共和国境内,从事建设项目重要设备监理活动以及开展设备工程技术和管理咨询业务活动的单位应达到的基本要求。1.2 引用文件1) 设备监理管理暂行办法(国质检质联2001174号)2) 设备监理单位资格管理办法(2002年第28号局长令)3) 注册设备监理师执业资格制度暂行规定、注册设备监理师
8、执业资格考试实施办法(国人部发200340号)4) GB/T19000-2000 idt ISO9000:2000质量管理体系 基础和术语5) GB/T19001-2000 idt ISO9001:2000 质量管理体系 要求6) FIDIC职业道德准则(1996)1.3 术语和定义GB/T19000-2000 idt ISO9000:2000质量管理体系 基础和术语中的有关术语适用于本文件,还包括:1) 设备:预期形成永久性工程部件的,能够独立地完成至少一道生产工序或能够提供某种需要所必需的机械装置、电气、自动化设备及相关软件、仪器和工具。2) 重要设备:国家大中型基本建设项目、限额以上技术
9、改造项目等所需的主要设备、国家重点信息系统的重要硬件及相配套的应用软件。3) 监理:有关咨询单位,受项目业主的委托,根据合同的约定,按照一定的准则,对被监理方的有关活动进行监督和管理,使这些活动符合准则的要求,并达到项目业主的委托目的的活动。4) 设备监理:依法设立的设备监理(企业法人)单位,受项目业主委托,并根据监理合同的约定,按照国家有关法规、规章、技术标准,对重要设备的设计、制造、检验、储运、安装、调试等过程的质量、进度和投资等实施监督和管理。5) 监理专业范围:指设备监理单位监理业务涉及的设备工程专业领域。6) 设备监理单位:具有企业法人资格并取得相应等级设备监理单位资格证书的从事重要
10、设备监理业务,即设备工程技术和管理咨询服务业务的社会组织。7) 设备监理人员:与设备监理单位发生正式聘用合同关系,且其工作内容与设备监理有关的人员,包括:管理者、设备监理工程师和其他工作人员。8) 注册设备监理师:经全国统一考试合格,取得注册设备监理师执业资格证书,并经注册从事设备监理业务活动的专业技术人员。9) 项目业主:工程设备的所有者即接受设备监理服务的委托方。10) 被监理单位:设备监理单位受项目业主委托,进行设备监理服务过程中所监理的组织。11) 相关单位:与设备监理单位所监理项目有利益关系的组织。12) 设备监理服务规划(即设计和开发输出文件):阐述将开展的设备监理服务的服务特性和
11、验收标准、描述其所用方法和手段以及所需的资源、规定其评价和控制过程的文件。2基本要求2.1 设备监理单位设备监理单位须满足以下要求:1) 应为独立承担法律责任的企业法人,设备监理单位属独立的社会中介服务机构,与行政机关无行政隶属关系或者其他经济利益关系,与被监理方无任何隶属关系和其他经济利益关系;2) 应具有一定的业务能力,并承诺只在其能力范围内开展监理工作;3) 应具有足够的专业配套的设备监理人员为项目业主提供满意的监理服务工作,并有随时可用的后备人员;4) 应具备适应监理项目规模和类型的管理能力,确保以最有效的方式完成监理工作,如可采取项目管理的方式;5) 应具有足够的财力资源来支持其在能
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 设备 监理 单位 资格 基本要求
链接地址:https://www.31doc.com/p-2040419.html