ou浙江天颂-整体式现浇混凝土中翻边侧模支设工艺创新.doc
《ou浙江天颂-整体式现浇混凝土中翻边侧模支设工艺创新.doc》由会员分享,可在线阅读,更多相关《ou浙江天颂-整体式现浇混凝土中翻边侧模支设工艺创新.doc(10页珍藏版)》请在三一文库上搜索。
1、up of the so-called 16 refers to has not been registered. Therefore, including leading cadres of party members within the normal range of the villagers, the alumni, the comrades in the party did not violate the party discipline. The third issue, on violations of the clean disciplinary integrity disc
2、ipline has been 18 since the construction of a clean government and combat corruption the focus of the work. The amendment, a clean discipline this adjustment is the largest, most new, of which 8 of the original provisions of the code of prohibition and 52 not included in this section. (1) eight Cen
3、tral rules and requirements incorporated in the new regulation 18 of the party since the Central Government to implement the eight provisions and pay close attention to inform the node, intensive, recreational activities, tourism, public cars for private purposes, and public money showers, large . C
4、ard behavior to make it simple, such as catch-all, but rather distinguishes different situations is provided for. First, according to article 83rd, receiving may affect the impartiality of official gifts, gifts, cards, and so on, depending on the seriousness of the offender, that is to say, that may
5、 affect the impartiality of official gifts, gifts, cards, etc will be allowed to receive. 192 according to article 83rd, receive significantly exceeds the normal return gifts, gifts, cards, to be disciplined. This is a new provision, that daily life is reciprocity, acceptance of colleagues, students
6、, fellow, friends, gift, gifts, gift cards, and so on, although unrelated to just carrying out their duties, be dealt with also depends on the situation, the situation is significantly beyond the normal reciprocity. The so-called reciprocity, one is at a ceremony about a bit, in other words you are
7、going to have me do, I also told you how, not just to not to. B refers to the significantly beyond the normal economic level, custom, personal gifts, gifts of value. Given sanctions according to a variety of factors when considering a discretionary process. Third, according to the 84th section to co
8、rporate officers and their spouses children, childrens spouses and other relatives and certain other persons donated significantly beyond the normal courtesy of gifts, gifts, cards, plot heavy, warning placed on probation within the disciplinary action. In accordance with the above provisions, gift
9、significantly beyond the normal reciprocity, givers also constitutes a disciplinary offence. (4) on the illegal sale of stock or other securities investment in the 88th was about breaches of the relevant provisions of profit disposition provisions of the Act. Among them, the 3rd sale of stock or oth
10、er securities investment was listed as one of indiscipline. You first need to clear is, the Ordinance does not change the provisions of the Ordinance. The original Ordinance provides, the 77th article personal violations of selling stock is one of the disciplinary cases, with the beginning of the fi
11、rst paragraph of this article contrary to the relevant provisions of 20 anti- words repeated. Amendments, just removed from the legislative technique violation, which does not alter the requirement. Needs to be clear is that sale of stock or other securities investment refers to violation of the rel
12、evant provisions was in April 2001 a CPC Central Committee and the State Council issued on party workers individual investment behavior of securities regulations. According to the provisions of article III, working hours, office facilities and selling stocks and securities整体式现浇混凝土翻边侧模支设工艺创新天颂建设集团有限公
13、司台州市恩泽医疗中心公共卫生医学楼QC小组一、工程概况台州市恩泽医疗中心公共卫生医学楼位于台州市路桥区,结构形式为钢筋混凝土框架结构,建筑层数地上4层,建筑高度17.96m,总建筑面积11688 m2。厕浴间结构自防水是解决渗漏水质量通病的关键,国家标准建筑地面工程施工质量验收规范GB50209-2010明确要求“厕浴间和有防水要求的房间楼板四周除门洞外应做混凝土翻边”,此规定并作为强制性条文严格执行。二、QC小组概况为确保工程质量,进一步激发广大专业人员的积极性和创造性,通过群众性质量管理活动为工程建设提供保证,在公司注册登记成立了QC小组。小组成员自愿参加,其中有技术人员,也有来自一线班组
14、人员。QC小组概况表小组名称台州市恩泽医疗中心公共卫生医学楼QC小组课题类型创新型小组成立时间2010年8月活动时间2010.8-2010.12注册登记号天颂QC2010-05课题登记号天颂QCK1005序号姓名性别年龄职称组内职务小组内分工1任九如男47工程师组长组织策划2孙海峰男42高工专家组组长技术指导3颜传国男33工程师副组长技术负责4包永光男36工程师组员技术管理5谢哲武男36工程师组员现场实施6叶飞男30工程师组员质量监控7陈建柏男25助工组员测量监控8赵坪男25助工组员现场实施9孙开村男46技工组员现场实施制表:颜传国 日期:2010年8月10日三、选择课题1、厕浴间渗漏是影响使
15、用功能的质量通病,其中结构自防水是关键,混凝土翻边作为结构自防水的重要环节,其施工质量好坏不仅会影响工程的创优夺杯,而且直接影响结构自防水的效果。2、为了确保结构自防水效果,要求翻边与楼板一同浇筑混凝土,但是翻边侧模支设以及控制其位置准确性难度较大。3、小组通过查阅了相关文献以及现场调查,目前整体式现浇混凝土翻边普遍采用木方假脚支设翻边侧模的方式,这种方式是在侧模上间隔一定距离钉一根木方,将木方支承在楼板底模上,在混凝土初凝前拔除,再用水泥砂浆把木方假脚拔除后留下的孔洞堵塞,但是该方式存在较多的弊端,比如木方假脚拆除时间难把握,拆除过早,会影响混凝土翻边的质量,拆除过迟,假脚难以拔出,会产生贯
16、穿构件的渗漏水通道;孔洞堵塞用水泥砂浆现场拌制质量不易控制;水泥砂浆堵塞不严密亦会产生渗漏水现象等。基于上述三点理由,我们QC小组成员经研究决定进行混凝土翻边支模体系创新,选择课题为“整体式现浇混凝土翻边模板支设工艺创新”。四、目标确定及可行性分析目标值确定结合项目部创“钱江杯”优质工程的实际,经小组成员的认真分析、讨论,确定课题目标:定性目标:1、无贯通楼板的渗漏水通道,满足结构自防水要求;2、混凝土翻边外观质量无明显质量缺陷。定量目标:根据企业标准要求浇筑混凝土翻边尺寸偏差评定,合格率90%以上,最大偏差不超过允许偏差值的2.5倍。国家规范与企业标准现浇结构尺寸偏差对比表项目国家规范允许偏
17、差(mm)企业标准允许偏差(mm)检验方法轴线位置55钢尺检查截面尺寸8,55,3钢尺检查表面平整度852m靠尺和塞尺检查制表:颜传国 日期:2010年9月1日可行性分析1、本工程为公司创优夺杯的重点工程,工程质量目标为确保括苍杯、争创钱江杯,公司在人员配备以及技术力量上给予了大力支持。2、本QC小组成员均有一定的技术和理论知识,曾多次参与创优工程施工,熟悉运用QC小组活动的有关知识和方法,解决实际能力较强。3、现场班组承担过多个创杯工程施工,具有丰富的施工经验和较强的整体素质。通过上述分析,我们认为只要努力,本课题目标一定能够实现。五、提出各种方案并确定最佳方案1、对现有混凝土翻边侧模支设分
18、析,确定创新方向课题成员分析现有混凝土翻边侧模支设方法存在的弊端,通过广泛讨论,问题集中在 “侧模底脚位置固定”和“满足结构自防水”两个要点上,借助 “头脑风暴法”,相互启发,提出了三个技术可行性、经济合理性上较好的方案。方案一:利用钢筋支架方式固定混凝土翻边侧模方案二:利用U形钢筋垫块方式固定混凝土翻边侧模方案三:利用塑料垫块方式固定混凝土翻边侧模2、方案比选方案一:利用钢筋支架方式固定混凝土翻边侧模剖面图钢筋支架固定混凝土翻边侧模的施工方法中,钢筋支架采用12钢筋制作加工,用焊接连接方式将其固定在周边梁箍筋上,利用钢筋支架上部凹槽固定翻边侧模底脚, 确保混凝土翻边尺寸和平面位置的正确,钢筋
19、支架本身不贯穿楼板,不会产生贯通构件的渗漏水通道,确保构件达到结构自防水要求。方案二:利用U形钢筋垫块方式固定混凝土翻边侧模剖面图U形钢筋垫块方式固定混凝土翻边侧模的施工方法中,U形钢筋垫块根据工程实际情况选用不同钢筋规格制作加工,用焊接连接方式将其固定在垂直于混凝土翻边的上排板筋上,利用凹槽固定翻边侧模底脚, 确保混凝土翻边尺寸和平面位置的正确,U形钢筋垫块本身不贯穿楼板,不会产生贯通构件的渗漏水通道,确保构件达到结构自防水要求。方案三:利用塑料垫块方式固定混凝土翻边侧模剖面图塑料垫块方式固定混凝土翻边侧模施工方法中,根据工程实际情况确定其塑料垫块规格尺寸,采用注塑工艺进行生产,在垂直于混凝
20、土翻边的上排板筋上用扎丝固定垫块,利用垫块本身上部设有的凹槽固定翻边侧模底脚,确保混凝土翻边尺寸和平面位置的正确,垫块本身采用扎丝固定在楼板的上排钢筋上,不贯穿于整个构件,不会产生贯通构件的渗漏水通道,确保构件达到结构自防水要求。平面图 1-1剖面图 A视面 B视图固定混凝土翻边侧模塑料垫块图示最佳方案评价表方案技术特点经济合理性质量安全结论一1、钢筋支架加工制作复杂;2、在钢筋支架安装前须在安装箍筋上打好标高,安装不方便,工人操作水平要求高。3、安装费工时。钢筋支架成本:1、钢材:0.34m0.888kg/m5.0元/kg=1.51元/个;2、加工费:110元/工时80个/工时=1.36元/
21、个;3、合计:1.51+1.36=2.87元/个。钢筋支架采用人工制作加工和安装,受人为因素影响大,尺寸偏差波动大不易控制。制作安装采用焊接工艺,安全隐患多。不选择二1、U形钢筋垫块加工制作,选用钢筋规格考虑板筋保护层厚度(一般为14),在实际加工制作中,由于尺寸小,弯曲时困难;2、由于支撑在板筋上,纵横方向板筋的标高不一致,支撑在上排的下皮板筋时需要在厚度方向另加一根短钢筋(规格同于板筋)。U形钢筋垫块成本:1、钢材:0.20m1.21kg/m5.0元/kg =1.21元/个;2、加工费:110元/工时100个/工时=1.1元/个;3、合计:1.21+1.1=2.32元/个。钢筋垫块采用人工
22、制作加工和安装,尺寸偏差波动大,不易控制。安装采用焊接工艺,安全隐患多。不选择三1、塑料垫块采用注塑工艺生产,加工制作简便;2、由于支撑在板筋上,纵横方向板筋的标高不一致,分别支撑在上排的上、下皮板筋,需要加工两种厚度的规格;3、安装方便简单。塑料垫块成本:1、塑料:0.0324.2元/kg=0.13元/个;2、加工费:28元/小时480个/小时=0.06元/个;3、合计:0.13+0.06=0.19元/个。塑料垫块生产模具定型、尺寸统一,减少人为因素影响,尺寸控制准确。采用工厂化生产,采用扎丝固定,无安全隐患。选择制表:颜传国 日期:2010年9月10日六、制定对策表对 策 表方案或项目对策
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ou 浙江 整体 式现浇 混凝土 中翻边侧模支设 工艺 创新
链接地址:https://www.31doc.com/p-2158465.html