第2章电路的等效变换.ppt
《第2章电路的等效变换.ppt》由会员分享,可在线阅读,更多相关《第2章电路的等效变换.ppt(34页珍藏版)》请在三一文库上搜索。
1、,第二章 电阻电路的等效变换 Equivalent Transformation of Resistive Circuits,本章内容,2.1 引言,2.2 电路的等效变换,2.3 电阻的串并联,2.4 电阻的Y 变换,2.5 电压源和电流源的串并联,2.6实际电源的两种模型及其等效变换,2.7 输入电阻,返回总目录,(2)电阻的串、并联;,(3)电压源和电流源的等效变换。,(1)电路等效的概念;,重点,下 页,上 页,返回本章,难点,(1)电路等效的概念和等效变换的条件;,(2)含受控源电路输入电阻的求法。,Ohms law states that the voltage v across
2、a resistor is directly proportional to the current I flowing through the resistor.,KCL states that the algebraic sum of currents entering a node (or a closed boundary) is zero.,KVL states that the algebraic sum of all voltages around a closed path (or loop) is zero.,In other words, the sum of curren
3、ts entering a node is equal to the sum of the currents leaving the node.,Sum of voltages drops =Sum of voltage rises.,下 页,上 页,返回本章,2.1 引言,电阻电路( resistive circuit ),仅由电源和线性电阻构成的电路。,下 页,上 页,返回本章,线性电路( linear circuit ),由非时变线性无源元件、线性受控源和独立电源构成的电路,称为时不变线性电路,简称线性电路。,本章内容。,2.2 电路的等效变换,下 页,上 页,返回本章,所谓等效变换指电
4、路对外等效,而其内部则不一定等效 。,等效条件:指在端口上的伏安特性完全相同 。,下 页,上 页,返回本节,等效原则:除被等效电路部分替代的部分,未被替代的部分的电压和电流均保持不变。 对外等效:用等效电路的方法求解电路时,电压和电流保持不变的部分仅限于等效电路以外,即对外部特性等效。,下 页,对A电路中的电流、电压和功率而言,满足,上 页,返回本节,2.3 电阻的串联和并联,(1)电阻串联( Series Connection of Resistors ),下 页,上 页,返回本章,由KVL和欧姆定律:,等效电阻,Resistors in series behave as a single
5、resistor whose resistance is equal to the sum of the resistances of the individual resistors.,电阻首尾相连,流过同一电流的连接方式,串联电阻的分压,说明电压与电阻成正比,即总电压按各个串联电阻的电阻值进行分配,因此串联电阻电路可作分压电路 (voltage-divider circuit ),注意方向 !,下 页,上 页,返回本节,功率,总功率: p =ui = u1i + u2i+ + uni =R1i2+R2i2+ +Rni2 =Reqi2 =p1+ p2+ pn,电阻串联时,各电阻消耗的功率与电
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 电路 等效 变换
链接地址:https://www.31doc.com/p-2497301.html