CC1352P主要特性以及pcb电路图.doc
《CC1352P主要特性以及pcb电路图.doc》由会员分享,可在线阅读,更多相关《CC1352P主要特性以及pcb电路图.doc(7页珍藏版)》请在三一文库上搜索。
1、CC1352P主要特性以及pcb电路图TI公司的CC1352P是集成了功率放大器(+20-dBm)的多频段(1GHz和2.4GHz)多协议无线ARM MCU,CPU工作频率48MHz,集成了灵活的非常低功耗的RF收发器,支持多个物理层和RF标准,专用的无线电控制器(Arm Cortex-M0)低级别RF协议指令,目标用在无线M总线,IEEE802.15.4g, IPv6使能智能对象(6LoWPAN),线程,Zigbee, KNX RF, Wi-SUN, Bluetooth 5低功耗和专用系统。本文介绍了CC1352P主要特性,框图以及评估板LAUNCHXL-CC1352P1主要特性,电路图,材
2、料清单和PCB设计图。The CC1352P device is a multiprotocol Sub-1 and 2.4-GHz wireless MCU targeting Wireless M-Bus, IEEE802.15.4g, IPv6-enabled smart objects (6LoWPAN), Thread, Zigbee, KNX RF, Wi-SUN, Bluetooth 5low energy, and proprietary systems. The device contains a +20-dBm integrated high-power amplifier
3、 withbest-in-class efficiency for long-range applications.The CC1352P device is a member of the CC26xx and CC13xx family of cost-effective, ultra-low power,2.4-GHz and Sub-1 GHz RF devices. Very low active RF and microcontroller (MCU) current, in addition tosub-A sleep current with up to 80KB of RAM
4、 retention, provide excellent battery lifetime and allowoperation on small coin-cell batteries and in energy-harvesting applications.The CC1352P device combines a flexible, very low-power RF transceiver with a powerful 48-MHz ArmCortex-M4F CPU in a platform supporting multiple physical layers and RF
5、 standards. A dedicated RadioController (Arm Cortex-M0) handles low-level RF protocol commands that are stored in ROM or RAM,thus ensuring ultra-low power and great flexibility. The low power consumption of the CC1352P devicedoes not come at the expense of RF performance; the CC1352P device has exce
6、llent sensitivity androbustness (selectivity and blocking) performance.Sensors can be handled in a very low-power manner by a programmable, autonomous ultra-low powerSensor Controller CPU with 4KB of SRAM for program and data. The Sensor Controller, with its fastwake-up and ultra-low-power 2-MHz mod
7、e is designed for sampling, buffering, and processing bothanalog and digital sensor data; thus the MCU system can maximize sleep time and reduce active power.The CC1352P device is part of the SimpleLink microcontroller (MCU) platform, which consists of Wi-Fi,Bluetooth low energy, Thread, Zigbee, Sub
8、-1 GHz MCUs, and host MCUs, which all share a common,easy-to-use development environment with a single core software development kit (SDK) and rich tool set.A one-time integration of the SimpleLink platform enables you to add any combination of the portfoliosdevices into your design, allowing 100 pe
9、rcent code reuse when your design requirements change.CC1352P主要特性: Microcontroller Powerful Arm Cortex-M4F Processor EEMBC CoreMark Score: 148 Clock Speed Up to 48 MHz 352KB of In-System Programmable Flash 256KB of ROM for Protocols and Firmware 8KB of Cache SRAM (Available as General-Purpose RAM) 8
10、0KB of Ultra-Low Leakage SRAM 2-Pin cJTAG and JTAG Debugging Supports Over-the-Air Upgrade (OTA) Ultra-Low Power Sensor Controller With 4KB ofSRAM Sample, Store, and Process Sensor Data Operation Independent From System CPU Fast Wake-Up for Low-Power Operation TI-RTOS, Drivers, Bootloader, Bluetooth
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- CC1352P 主要 特性 以及 pcb 电路图
链接地址:https://www.31doc.com/p-3250412.html