机电一体化毕业论文4.doc
《机电一体化毕业论文4.doc》由会员分享,可在线阅读,更多相关《机电一体化毕业论文4.doc(14页珍藏版)》请在三一文库上搜索。
1、课程设计(论文)课题名称 直流稳压电源 系 别 专 业 班 级 学 号 学生姓名 指导教师 完成日期 广州科技贸易职业学院教务处制广州科技贸易职业学院课程设计(论文)任务系:机电系 专业:通信工程应用技术兹发给 班 同学课程设计(论文)任务书,内容如下:1、 课程设计(论文)题目: 直流稳压电源 2、应完成的项目: 制作一个完整的直流稳压电源并写设计论文 参考资料以及说明: 4、本课程设计(论文)任务书于 年 月 日发出,应于 年 月 日前完成。(论文:附后)指导教师签名: 年 月 日系主任签名: 年 月 日广州科技贸易职业学院课程设计(论文)题目: 直流稳压电源 系别: 班级: 学生: 系主
2、任: 指导老师: 职称: 课程设计(论文)评语: 指导教师签名:年 月 日成绩评定: 系负责人签名: 年 月 日 摘 要摘要:目前,我国生产和使用的本质安全型直流稳压电源大都是线性电源,其输出保护电路大多采用传统的模拟保护电路。因此,本质安全电源的容量普遍比较低。随着我国煤矿机械化、自动化程度的提高, 本质安全型电气设备在井下的监控、通讯、信号、仪表和自动化系统中应用日益广泛。由于这些设备的不断投入使用,矿用直流稳压电源的需求量稳步上升,与此同时对其容量也提出了更高的要求。从一定意义上讲,隔爆兼本质安全电源输出容量的大小取决于输出保护电路的反应时间。本课题针对矿用本安电源输出保护电路进行设计,
3、能够适应我国煤炭行业快速发展的需要,并且具有重要的实际意义。 研究结果表明,输出保护电路的设计影响到整个电源的性能,因此,应该熟悉本质安全电源的结构、检测标准、火花试验装置等相关文件和标准。在此基础上,设计保护电路的结构、选择反应速度较快的电子元器件用于保护电路主要元件。使得保护电路的反应速度满足国家标准规定的要求。 关键词:保护电路、本质安全、本质安全电源、国家标准。ABSTRACTABSTRACT: At present, Chinas production and use of essential safety-DC power supply are large linear power
4、 supply, output to protect its most traditional circuit simulation protection circuit. Therefore, intrinsically safe power supply capacity generally quite low. As Chinas coal mine mechanization and increase the degree of automation, intrinsically safe electrical equipment in underground surveillance
5、, communications, signals, instruments and automation system becomes more widely. As a result of these equipment constantly in use, mining DC Power demand has been increasing steadily, and Meanwhile the capacity of its set higher requirements. In a certain sense, flameproof and intrinsically safe po
6、wer output capacity of the output depends on the size of the protection circuit of reaction time. The issues against mining output power of the security protection circuit design, China to adapt to the rapid development of the coal industry needs, and has important practical significance. The result
7、s show that the output of the protection circuit design affect the performance of the entire power supply, therefore, Safety should be familiar with the nature of the power structure, testing standards, testing equipment and sparks, and other related documents and standards. On this basis, the prote
8、ction circuit design of the structure, choice reaction faster electronic circuit protection components for major components. Protection circuit makes the response speed to meet the national standard requirements. Keywords : protection circuit, intrinsically safe, intrinsically safe power supply, the
9、 national standard.目 录第1章 前 言4第2章 电路设计52.1 电路原理分析52.2 所需主要元件分析62.3 电路模块分析7第3章 电路的焊接83.1 元件的安放83.2 元件的极性分析93.3 焊接的注意事项9第4章 电路的调试104.1 外观检查104.2 通电测试10第5章 技术参数10第6章 总 结10 5.1对所制电路的总结10第7章 参考文献10 第1章 前 言自法拉第研究出发电机以来,电子信息工业及电子产品得到了迅猛的发展。电能与我们的生活息息相关,譬如电灯、电视机、手机、DVD、电脑等等。一切的电器都需要电源提供电能才能工作,电源按电流种类分分为直流电源
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 机电 一体化 毕业论文
链接地址:https://www.31doc.com/p-3278814.html