基于云的服务实现数据的分析和显示.doc
《基于云的服务实现数据的分析和显示.doc》由会员分享,可在线阅读,更多相关《基于云的服务实现数据的分析和显示.doc(3页珍藏版)》请在三一文库上搜索。
1、基于云的服务实现数据的分析和显示在园艺行业,物联网 (150353DS74500深蓝色 LED(450 nm 峰值波长)和150353BS74500蓝色 LED(460 nm 主波长)提供与调节叶绿素浓度、侧芽生长和叶片厚度相关的波长范围内的照明。150353GS74500绿色 LED(520 nm 峰值波长)和150353YS74500黄色 LED(590 nm 主波长)提供一度被认为不重要、但现在已知在植物避荫性反应中起作用的波长范围内的照明。150353复制 int main(void) #if PDL_CONFIGURATION /* Enable the whole LPComp b
2、lock */ Cy_LPComp_GlobalEnable(LPCOMP); /* Configure LPComp output mode and hysteresis for channel 0 */ Cy_LPComp_Init(LPCOMP, CY_LPCOMP_CHANNEL_0, /* Enable the local reference voltage */ Cy_LPComp_UlpReferenceEnable(LPCOMP); /* Set the local reference voltage to the negaTIve terminal and set a GPI
3、O input on the posiTIve terminal for the wake up signal */ Cy_LPComp_SeTInputs(LPCOMP, CY_LPCOMP_CHANNEL_0, CY_LPCOMP_SW_GPIO, CY_LPCOMP_SW_LOCAL_VREF); /* Set channel 0 power mode - Ultra Low Power mode */ Cy_LPComp_SetPower(LPCOMP, CY_LPCOMP_CHANNEL_0, CY_LPCOMP_MODE_ULP); /* It needs 50us start-u
4、p TIme to settle in ULP mode after the block is enabled */ Cy_SysLib_DelayUs(MY_LPCOMP_ULP_SETTLE); #else /* Start the LPComp Component */ LPComp_1_Start(); #endif /* Check the IO status.If current status is frozen, unfreeze the system.*/ if(Cy_SysPm_GetIoFreezeStatus() /* Unfreeze the system */ Cy_
5、SysPm_IoUnfreeze(); else /* Do nothing */ for(;) /* If the comparison result is high, toggles LED every 500ms */ if(Cy_LPComp_GetCompare(LPCOMP, CY_LPCOMP_CHANNEL_0) = MY_LPCOMP_OUTPUT_HIGH) /* Toggle LED every 500ms */ Cy_GPIO_Inv(LED_0_PORT, LED_0_NUM); Cy_SysLib_Delay(TOGGLE_LED_PERIOD); /* If th
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 基于 服务 实现 数据 分析 显示
链接地址:https://www.31doc.com/p-3416789.html