【BS标准word原稿】BS EN 10297-2-2005 Seamless steel tubes for mechanical and general engineering purposes —Technical delivery conditions — Part 2 Stainless steel.doc
《【BS标准word原稿】BS EN 10297-2-2005 Seamless steel tubes for mechanical and general engineering purposes —Technical delivery conditions — Part 2 Stainless steel.doc》由会员分享,可在线阅读,更多相关《【BS标准word原稿】BS EN 10297-2-2005 Seamless steel tubes for mechanical and general engineering purposes —Technical delivery conditions — Part 2 Stainless steel.doc(43页珍藏版)》请在三一文库上搜索。
1、豆丁网:http:/ Copy: sheffieldun sheffieldun, na, Tue Oct 10 03:16:12 BST 2006, Uncontrolled Copy, (c) BSIBRITISH STANDARD BS EN10297-2:2005Seamless steel tubes for mechanical and general engineering purposes Technical delivery conditions Part 2: Stainless steelThe European Standard EN 10297-2:2005 has
2、the status of aBritish StandardICS 77.140.75 BS EN 10297-2:2005National forewordThis British Standard is the official English language version ofEN 10297-2:2005.The UK participation in its preparation was entrusted to Technical CommitteeISE/8, Steel pipes, which has the responsibility to:aid enquire
3、rs to understand the text;present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed;monitor related international and European developments and promulgate them in the UK.A list of organizations represented
4、 on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by
5、using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity
6、from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 33 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Licensed Copy: sheffieldun sheffieldun, na, Tue Oct 1
7、0 03:16:12 BST 2006, Uncontrolled Copy, (c) BSIAmd. No.DateCommentsThis British Standard was published under the authority of the Standards Policy and Strategy Committeeon 30 December 2005 BSI 30 December 2005ISBN 0 580 46932 8Amendments issued since publicationEUROPEAN STANDARD NORME EUROPENNEEUROP
8、ISCHE NORMEN 10297-2December 2005ICS 77.140.75English VersionSeamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steelTubes sans soudure en acier pour utilisation en mcanique gnrale et en construction mcanique - Conditions techniqu
9、es de livraison - Partie 2: Tubes en acier inoxydableNahtlose kreisfrmige Stahlrohre fr den Maschinenbau und allgemeine technische Anwendungen - Technische Lieferbedingungen - Teil 2: Nichtrostender SthleThis European Standard was approved by CEN on 25 March 2005.CEN members are bound to comply with
10、 the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretaria
11、t or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official ve
12、rsions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Swit
13、zerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T EUR O P EN DE NOR M A L I S A TI ON EUR O P I S C H ES KOM I TEE F R NOR M UNG Management Centre: rue de Stassart, 36 B-1050 BrusselsLicensed Copy: sheffieldun sheffieldun, na, Tue Oct 10 03:16:12 BST 2006, Uncontrolled Copy
14、, (c) BSI 2005 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Ref. No. EN 10297-2:2005: EEN 10297-2:2005 (E)Licensed Copy: sheffieldun sheffieldun, na, Tue Oct 10 03:16:12 BST 2006, Uncontrolled Copy, (c) BSIContents PageForeword .3Introduction
15、.41Scope .52Normative references .53Terms and definitions .64Symbols .65Classification and designation .66Information to be supplied by the purchaser.67Manufacturing process.78Requirements .89Inspection and testing .2010Sampling.2211Test methods.2312Marking .2513Handling and packaging.25Annex A (nor
16、mative) Process route and surface conditions .26Annex B (informative) Guideline data on heat treatment during fabrication and hot working as part of further processing .27Annex C (normative) Formulae for calculation of nominal sectional properties .32Bibliography.339Licensed Copy: sheffieldun sheffi
17、eldun, na, Tue Oct 10 03:16:12 BST 2006, Uncontrolled Copy, (c) BSIForewordThis document (EN 10297-2:2005) has been prepared by Technical Committee ECISS/TC 29 “Steel tubes and fittings for steel tubes”, the secretariat of which is held by UNI.This European Standard shall be given the status of a na
18、tional standard, either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national standards shall be withdrawn at the latest by June 2006.Another part of EN 10297 is:Part 1: Non-alloy and alloy steel tubesAnother European Standard series, covering se
19、amless steel tubes for mechanical and general engineering purposes, currently being prepared is:EN 10296-2 Welded circular steel tubes for mechanical and general engineering purposes Technical delivery conditions Part 2: Stainless steel.Other series of European Standards being prepared in this area
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS标准word原稿 【BS标准word原稿】BS EN 10297-2-2005 Seamless steel tubes for mechanical and general engineering BS
链接地址:https://www.31doc.com/p-3619327.html