【AS澳大利亚标准】AS NZS 3750.6-2009 Paints for steel structures Part 6 Full gloss polyurethane (twopack).doc
《【AS澳大利亚标准】AS NZS 3750.6-2009 Paints for steel structures Part 6 Full gloss polyurethane (twopack).doc》由会员分享,可在线阅读,更多相关《【AS澳大利亚标准】AS NZS 3750.6-2009 Paints for steel structures Part 6 Full gloss polyurethane (twopack).doc(25页珍藏版)》请在三一文库上搜索。
1、AS/NZS 3750.6:2009AS/NZS 3750.6:2009Australian/New Zealand StandardPaints for steel structuresPart 6: Full gloss polyurethane (two- pack)The Standard is downloaded from Standard SharingAS/NZS 3750.6:2009This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee CH-003, Pai
2、nts and Related Materials. It was approved on behalf of the Council of Standards Australia on 16 March 2009 and on behalf of the Council of Standards New Zealand on 27 March 2009.This Standard was published on 20 April 2009.The following are represented on Committee CH-003:AUSTROADSAustralasian Corr
3、osion AssociationAustralian Paint Approval SchemeAustralian Paint Manufacturers FederationAustralian Pipeline Industry AssociationBusiness New ZealandEngineers AustraliaInstitution of Professional Engineers New ZealandMaster Painters AustraliaMaster Painters New Zealand AssociationNational Associati
4、on of Testing Authorities AustraliaWater Corporation Western AustraliaKeeping Standards up-to-dateStandards are living documents which reflect progress in science, technology and systems. To maintain their currency, all Standards are periodically reviewed, and new editions are published. Between edi
5、tions, amendments may be issued. Standards may also be withdrawn. It is important that readers assure themselves they are using a current Standard, which should include any amendments which may have been published since the Standard was purchased.Detailed information about joint Australian/New Zeala
6、nd Standards can be found by visiting the Standards Web Shop at .au or Standards New Zealand web site at www.standards.co.nz and looking up the relevant Standard in the on-line catalogue.Alternatively, both organizations publish an annual printed Catalogue with full details of all current Standards.
7、 For more frequent listings or notification of revisions, amendments and withdrawals, Standards Australia and Standards New Zealand offer a number of update options. For information about these services, users should contact their respective national Standards organization.We also welcome suggestion
8、s for improvement in our Standards, and especially encourage readers to notify us immediately of any apparent inaccuracies or ambiguities. Please address your comments to the Chief Executive of either Standards Australia or Standards New Zealand at the address shown on the back cover.This Standard w
9、as issued in draft form for comment as DR 07098.AS/NZS 3750.6:2009Australian/New Zealand StandardPaints for steel structuresPart 6: Full gloss polyurethane (two- pack)Originated as AS 26021983. Previous edition AS/NZS 3750.6:1995. Second edition 2009.COPYRIGHT Standards Australia/Standards New Zeala
10、ndAll rights are reserved. No part of this work may be reproduced or copied in any form or by any means, electronic or mechanical, including photocopying, without the written permission of the publisher.Jointly published by Standards Australia, GPO Box 476, Sydney, NSW 2001 and StandardsNew Zealand,
11、 Private Bag 2439, Wellington 6020ISBN 0 7337 9122 03AS/NZS 3750.6:2009The Standard is downloaded from Standard SharingPREFACEThis Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee CH-003, Paints and Related Materials to supersede AS/NZS 3750.6:1995. It is part
12、of a series of product Standards for paints referred to in AS/NZS 2312, Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings.The objective of this Standard is to specify requirements for full gloss polyurethane paints used on steel structures. T
13、his Standard includes information on high-build paints and supersedes AS/NZS 3750.6:1995.The following Standards in this series have been published: AS2364Paints for steel structuresHigh build epoxy (two-pack)2672Paints for steel structuresChlorinated rubber, high build2673Paints for steel structure
14、sAlkyd/micaceous iron oxide2674Paints for steel structuresEpoxy primer (two-pack)3750Paints for steel structures3750.1Part 1: Epoxy mastic (two-pack)For rusted steel3750.2Part 2: Ultra high-build paint3884Etch primers (single pack and two-pack) for pretreating metal surfaces3885Paints for steel stru
15、cturesGalvanized and zinc primedLatex3887Paints for steel structuresCoal tar epoxy (two-pack) AS/NZSPaints for steel structures3750.3Part 3: Heat-resistingExterior3750.4Part 4: Bitumen paint3750.5Part 5: Acrylic full gloss (two-pack)3750.6Part 6: Full gloss polyurethane (two-pack) (this Standard)375
16、0.7Part 7: Aluminium paint3750.8Part 8: Vinyl paintsPrimer, high-build and gloss3750.9Part 9: Organic zinc-rich primer3750.10Part 10: Full gloss epoxy (two-pack)3750.11Part 11: Chlorinated rubberHigh-build and glass3750.12Part 12: Alkyd/micaceous iron oxide3750.13Part 13: Epoxy primer (two-pack)3750
17、.14Part 14: High-build epoxy (two-pack)3750.15Part 15: Inorganic zinc silicate paint3750.16Part 16: Waterborne primer and paint for galvanized, zinc/aluminium alloy- coated and zinc-primed steel3750.17Part 17: Etch primers (single pack and two-pack)3750.18Part 18: Moisture cure urethane (single-pack
18、) systems3750.19Part 19: Metal primerGeneral purpose3750.20Part 20: Anticorrosive metal primerSolvent-borneLead and chromate free3750.21Part 21: UndercoatSolvent-borne3750.22Part 22: Full gloss enamelSolvent-borne3750.23Part 23: Semi-gloss enamelSolvent-borneThe terms normative and informative have
19、been used in this Standard to define the application of the appendix to which they apply. A normative appendix is an integral part of a Standard, whereas an informative appendix is only for information and guidance.CONTENTSPageSECTION 1 SCOPE AND GENERAL1.1SCOPE . 41.2REFERENCED DOCUMENTS . 41.3DEFI
20、NITIONS . 41.4SAFETY PRECAUTIONS . 5SECTION 2 MATERIAL REQUIREMENTS2.1GENERAL . 62.2CONDITIONS OF TEST. 62.3LIQUID PAINT. 62.4APPLICATION PROPERTIES . 62.5APPLIED FILM . 7SECTION 3 PACKAGING AND LABELLING3.1PACKAGING. 123.2LABELLING . 12APPENDICESAPURCHASING GUIDELINES. 13BGUIDANCE ON THE USE AND AP
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- AS澳大利亚标准 【AS澳大利亚标准】AS NZS 3750.6-2009 Paints for steel structures Part Full gloss polyurethane twopack AS
链接地址:https://www.31doc.com/p-3619349.html