【AS澳大利亚标准】AS NZS 3576-1998 Clearing saws, brushcutters and grass trimmers-Guide to safe working practices.doc
《【AS澳大利亚标准】AS NZS 3576-1998 Clearing saws, brushcutters and grass trimmers-Guide to safe working practices.doc》由会员分享,可在线阅读,更多相关《【AS澳大利亚标准】AS NZS 3576-1998 Clearing saws, brushcutters and grass trimmers-Guide to safe working practices.doc(27页珍藏版)》请在三一文库上搜索。
1、Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 07 Aug 2007AS/NZS 3576:1998Australian/New Zealand StandardClearing saws, brushcutters and grass trimmersGuide to safe working practicesThe Standard is downloaded from Standard SharingAS/NZS 3576:1998This Joint Australian/New Zealand Standard was prepared
2、 by Joint Technical Committee SF/33, Chainsaw Safety. It was approved on behalf of the Council of Standards Australia on 1 December 1997 and on behalf of the Council of Standards New Zealand on 10 February 1998. It was published on 5 April 1998.The following interests are represented on Committee SF
3、/33:Australian National University Australian Timber Trainers Association Department of Labour, New Zealand Department of Primary Industries Forestry, QldGermanAustralian Chamber of Industry and CommerceMetal Trades Industry Association of AustraliaOutdoor Power Equipment AssociationPlastics and Che
4、micals Industry AssociationPrimary Industries Forestry, S.A.Queensland Forestry Research InstituteState Forests of New South WalesSwedish Chamber of CommerceTasmanian Forest Industries Training BoardVictorian Association of Forest IndustriesWorkCover N.S.W.Workplace Standards Authority (Tasmania)Acc
5、essed by UNIVERSITY OF SOUTH AUSTRALIA on 07 Aug 2007Review of Standards. To keep abreast of progress in industry, Joint Australian/ New Zealand Standards are subject to periodic review and are kept up to date by the issue of amendments or new editions as necessary. It is important therefore that St
6、andards users ensure that they are in possession of the latest edition, and any amendments thereto.Full details of all Joint Standards and related publications will be found in the Standards Australia and Standards New Zealand Catalogue of Publications; this information is supplemented each month by
7、 the magazines The Australian Standard and Standards New Zealand, which subscribing members receive, and which give details of new publications, new editions and amendments, and of withdrawn Standards.Suggestions for improvements to Joint Standards, addressed to the head office of either Standards A
8、ustralia or Standards New Zealand, are welcomed. Notification of any inaccuracy or ambiguity found in a Joint Australian/New Zealand Standard should be made without delay in order that the matter may be investigated and appropriate action taken.This Standard was issued in draft form for comment as D
9、R 97029.Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 07 Aug 2007AS/NZS 3576:1998Australian/New Zealand StandardClearing saws, brushcutters and grass trimmersGuide to safe working practicesOriginated in Australia as AS 3576 1988.Jointly revised and designated AS/NZS 3576:1998.PUBLISHED JOINTLY BY: ST
10、ANDARDS AUSTRALIA1 The Crescent,Homebush NSW 2140 AustraliaSTANDARDS NEW ZEALANDLevel 10, Radio New Zealand House,155 The Terrace,Wellington 6001 New ZealandISBN 0 7337 1729 23AS/NZS 3576:1998The Standard is downloaded from Standard SharingPREFACEThis Standard was prepared by the Standards Australi
11、a/Standards New Zealand Committee SF/33, Chainsaw Safety, to supersede AS 3576 1988, Brushcutters Guide to safe working practices.It provides guidelines and recommendations for the safe use of clearing saws, brushcutters and grass trimmers, identifies hazards, describes methods for particular operat
12、ions, and outlines basic principles for the instruction and training of brushcutter operators.The Standard also includes fire prevention measures, and a maintenance program for brushcutters.This edition has been rearranged to help the user understand fully the precautions which should be observed wh
13、en using a clearing saw, brushcutter or grass trimmer, and some information has been revised. The terms, clearing saw, brushcutter and grass trimmer have been introduced into this edition to identify the type of units covered. CopyrightSTANDARDS AUSTRALIA / STANDARDS NEW ZEALANDUsers of Standards ar
14、e reminded that copyright subsists in all Standards Australia and Standards New Zealand publications and software. Except where the Copyright Act allows and except where provided for below no publications or software produced by Standards Australia or Standards New Zealand may be reproduced, stored
15、in a retrieval system in any form or transmitted by any means without prior permission in writing from Standards Australia or Standards New Zealand. Permission may be conditional on an appropriate royalty payment. Australian requests for permission and information on commercial software royalties sh
16、ould be directed to the head office of Standards Australia. New Zealand requests should be directed to Standards New Zealand.Up to 10 percent of the technical content pages of a Standard may be copied for use exclusively in-house by purchasers of theStandard without payment of a royalty or advice to
17、 Standards Australia or Standards New Zealand.Inclusion of copyright material in computer software programs is also permitted without royalty payment provided such programs are used exclusively in-house by the creators of the programs.Care should be taken to ensure that material used is from the cur
18、rent edition of the Standard and that it is updated whenever the Standard is amended or revised. The number and date of the Standard should therefore be clearly identified.Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 07 Aug 2007The use of material in print form or in computer software programs to be
19、 used commercially, with or without payment, or in commercial contracts is subject to the payment of a royalty. This policy may be varied by Standards Australia or Standards New Zealand at any time.CONTENTSPageAccessed by UNIVERSITY OF SOUTH AUSTRALIA on 07 Aug 2007SECTION 1 SCOPE AND GENERAL1.1SCOP
20、E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.2OBJECTIVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.3REFERENCED DOCUMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21、. 41.4DEFINITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.5MANUFACTURERS INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 7SECTION 2HAZARDS AND PROTECTION2.1GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22、. . . . . . . . . . . . . . . . 82.2HAZARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82.3TRANSPORT OF CLEARING SAWS, BRUSHCUTTERS ANDGRASS TRIMMERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82.4VIBRATION .
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- AS澳大利亚标准 【AS澳大利亚标准】AS NZS 3576-1998 Clearing saws brushcutters and grass trimmers-Guide to safe working AS
链接地址:https://www.31doc.com/p-3619516.html