【BS英国标准】BS EN 792-13-2000 手持非电动工具.安全要求.紧固件旋具.doc
《【BS英国标准】BS EN 792-13-2000 手持非电动工具.安全要求.紧固件旋具.doc》由会员分享,可在线阅读,更多相关《【BS英国标准】BS EN 792-13-2000 手持非电动工具.安全要求.紧固件旋具.doc(37页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARDHand-held non-electric power tools Safety requirements Part 13: Fastener driving toolsThe European Standard EN 792-13:2000 has the status of aBritish StandardICS 25.140.01| BS EN792-13:2000|NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 792-13:2000Nationa
2、l forewordThis British Standard is the official English language version of EN 792-13:2000. The UK participation in its preparation was entrusted to Technical CommitteeMCE/8, Compressors, pneumatic tools, pneumatic machines and vacuum technology, which has the responsibility to: aid enquirers to und
3、erstand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this committe
4、e can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled International Standards Correspondence Index, or by using the
5、Find facility of the BSI Standards Electronic Catalogue.A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application.Compliance with a British Standard does not of itself confer immunity from legal
6、 obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 33 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amd. No.DateCommentsThis British Standard, having been prepared
7、 under the direction of the EngineeringSector Committee, was published under the authority of the Standards Committee and comes into effect on 15 October 2000BSI 10-2000ISBN 0 580 36511 5Amendments issued since publicationEUROPEAN STANDARD NORME EUROPENNEEUROPISCHE NORMEN 792-13June 2000ICS 25.140.9
8、9English versionHand-held non-electric power tools - Safety requirements - Part13: Fastener driving toolsMachines portatives moteur non lectrique - Prescriptions de scurit - Partie 13: Machines enfoncer les fixationsHandgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Tei
9、l 13: EintreibgerteThis European Standard was approved by CEN on 10 March 2000.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bib
10、liographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility o
11、f a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, No
12、rway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T EUR O P EN DE NOR M A L I S A TI ON EUR O P I S C H ES KOM I TEE F R NOR M UNG Central Secretariat: rue de Stassart, 36 B-1050 Brussels 2000 CENAll rights of exploitation in any form and by
13、 any means reserved worldwide for CEN national Members.Ref. No. EN 792-13:2000 EPage 25EN 792-13:2000CONTENTSPageForeword.30Introduction .31Scope .32Normative references .43Definitions .44List of hazards.75Safety requirements and/or measures.86Verification .117User Information, operating instruction
14、s .14Annex A (normative) Assessment Procedure to Prove the Necessity of a Safety Yoke.18Annex AA (informative) Computational Examples for Determination of Safety Yoke Conditions .21Annex B ( informative ) Noise Reduction .24Annex C (informative) Information on Ergonomic Design of the Handle .25Annex
15、 D (informative) Sample Operating Instructions For Fastener Driving Tools Operated byCompressed Air .26Annex ZA (informative) Relationship of this European Standard with EC Directives.33Bibliography.33ForewordThis European Standard has been prepared by Technical Committee CEN/TC 255 Hand-held, non-e
16、lectric power tools - Safety, the secretariat of which is held by SIS.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2000, and conflicting national standards shall be withdrawn at the la
17、test by December 2000This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative Annex ZA, which is an integral
18、part of this standard.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Ne
19、therlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.This European Standard has been drawn up in co-operation with representatives of the manufacturers and users of fastener driving tools and the health and safety authorities.Normative and informative annexes to this standa
20、rd are indicated in the contents list.0IntroductionThis standard has been drawn up to serve as a harmonised standard which represents one means of achieving conformity with the fundamental safety requirements of the EC Machinery Directive and associated EFTA Regulations.The extent to which hazards a
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS英国标准 【BS英国标准】BS EN 792-13-2000 手持非电动工具.安全要求.紧固件旋具 BS 英国 标准 792 13 2000 手持 电动工具 安全 要求 紧固 件旋具
链接地址:https://www.31doc.com/p-3620120.html