【BS英国标准】BS EN 683-2-1997 Aluminium and aluminium alloys -Finstock Part 2. Mechanical properties.doc
《【BS英国标准】BS EN 683-2-1997 Aluminium and aluminium alloys -Finstock Part 2. Mechanical properties.doc》由会员分享,可在线阅读,更多相关《【BS英国标准】BS EN 683-2-1997 Aluminium and aluminium alloys -Finstock Part 2. Mechanical properties.doc(13页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARDAluminium and aluminium alloys FinstockPart 2. Mechanical propertiesThe European Standard EN 683-2 : 1996 has the status of aBritish StandardICS 77.120.10| BS EN683-2 : 1997|NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 683-2 : 1997Committees responsible
2、 for thisBritish StandardThe preparation of this British Standard was entrusted to Technical Committee NFE/35, Light metals and their alloys, upon which the following bodies were represented:Aluminium FederationAluminium Stockholders Association Association of Light Alloy Refiners Ltd. Magnesium Ind
3、ustry CouncilMinistry of DefenceThe following bodies were also represented in the drafting of the standard, through subcommittees and panels:Association of British Welded Aluminium Tube MakersInstitution of Structural EngineersMetal Packaging Manufacturers AssociationThis British Standard, having be
4、en prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on15 April 1997BSI 1997The following BSI references relate to the work on this standard:Committee reference NFE/35Draft for comment 92/49091 DCISBN 0 580 26
5、787 3Amd. No.DateText affectedAmendments issued since publicationBS EN 683-2 : 1997ContentsPage Committees responsible Inside front cover National foreword iiText of EN 683-22BSI 1997iBS EN 683-2 : 1997National forewordThis British Standard has been prepared under the direction of the Engineering Se
6、ctor Board and is the English language version of EN 683-2 : 1996, published by the European Committee for Standardization (CEN).Cross-referencesPublication referred to Corresponding British StandardEN 515 : 1993BS EN 515 : 1993 Aluminium and aluminium alloys.Wrought products. Temper designation.BS
7、EN 573 Aluminium and aluminium alloys. Chemical composition and form of wrought productsEN 573-1 : 1994BS EN 573 : Part 1 : 1995 Numerical designation systemEN 573-2 : 1994BS EN 573 : Part 2 : 1995 Chemical symbol based designation systemEN 573-3 : 1994BS EN 573 : Part 3 : 1995 Chemical compositionE
8、N 683-1 : 1996BS EN 683-1 : 1996BS EN 10002 Tensile testing of metallic materialsEN 10002-1 : 1990BS EN 10002 : Part 1 : 1990 Method of test at ambient temperatureCompliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a fr
9、ont cover, an inside front cover, pages i and ii, the ENtitle page, pages 2 to 8, an inside back cover and a back cover.iiBSI 1997EUROPEAN STANDARDEN 683-2NORME EUROPE ENNEEUROPA ISCHE NORMAugust 1996ICS 77.120.10Descriptors: Aluminium, aluminium alloys, rolled products, thin films, heat exchangers,
10、 mechanical characteristics, tension tests, tables (data)English versionAluminium and aluminium alloys Finstock Part 2 : Mechanical propertiesAluminium et alliages daluminium Bandes pour e changeurs thermiques Partie 2: Caracte ristiques me caniquesAluminium und Aluminiumlegierungen Vormaterial fu r
11、 Wa rmeaustauscher (Finstock) Teil 2: Mechanische EigenschaftenThis European Standard was approved by CEN on 1996-07-28. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard withou
12、t any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made
13、by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Lu
14、xembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.CENEuropean Committee for Standardization Comite Europe en de Normalisation Europa isches Komitee fu r NormungCentral Secretariat: rue de Stassart 36, B-1050 Brussels1996 Copyright reserved to CEN members.Ref. No.
15、 EN 683-2 : 1996 EPage 3EN 683-2 : 1996BSI 1997ForewordThis European standard has been drawn up byCEN/TC 132, Aluminium and aluminium alloys, ofContentsPagewhich the Secretariat is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an iden
16、tical text or by endorsement, at the latest by February 1997, and conflicting standards shall be withdrawn at the latest by February 1997.This standard is part of a set of three standards which are the following:EN 683-1 : 1996 Aluminium and aluminium alloys Finstock Part 1: Technical conditions for
17、 inspection and deliveryEN 683-2 : 1996 Aluminium and aluminium alloys Finstock Part 2: Mechanical propertiesEN 683-3 : 1996 Aluminium and aluminium alloys Finstock Part 3: Tolerances on dimensions and formAccording to the CEN/CENELEC Internal Regulations, the national standards organizations of the
18、 following countries are bound to implement this European Standard:Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Foreword 21 Scope 32 Normative references 33 Tensile t
19、esting 34 Mechanical properties 35 Rounding of test results 3AnnexA (normative) Rules for rounding 71 ScopeThis Part of EN 683 specifies the mechanical properties of wrought aluminium and aluminium alloy finstock.It applies to flat rolled products.The chemical composition limits of these materials a
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS英国标准 【BS英国标准】BS EN 683-2-1997 Aluminium and alloys -Finstock Part 2. Mechanical properties BS 英国 标准
链接地址:https://www.31doc.com/p-3620337.html