ANSI C63.2-2009 American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications.pdf
《ANSI C63.2-2009 American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications.pdf》由会员分享,可在线阅读,更多相关《ANSI C63.2-2009 American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications.pdf(19页珍藏版)》请在三一文库上搜索。
1、ANSI C63.2-2009 (Revision of ANSI C63.2-1996) American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications IEEE 3 Park Avenue New York, NY 10016-5997, USA 14 December 2009 Sponsored by the Accredited Standards Committee C63Electromagnetic Co
2、mpatibility Accredited by the American National Standards Institute C63.2 Authorized licensed use limited to: Peking University. Downloaded on December 26,2010 at 16:10:46 UTC from IEEE Xplore. Restrictions apply. Authorized licensed use limited to: Peking University. Downloaded on December 26,2010
3、at 16:10:46 UTC from IEEE Xplore. Restrictions apply. ANSI C63.2-2009 (Revision of ANSI C63.2-1996) American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications Sponsor Accredited Standards Committee C63Electromagnetic Compatibility accredit
4、ed by the American National Standards Institute Secretariat Institute of Electrical and Electronic Engineers, Inc. Approved 20 October 2009 American National Standards Institute Authorized licensed use limited to: Peking University. Downloaded on December 26,2010 at 16:10:46 UTC from IEEE Xplore. Re
5、strictions apply. Abstract: Electromagnetic compatibility techniques and requirements for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided. Keywords: electromagnetic compatibility, field strength instrumenta
6、tion The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2009 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 14 December 2009. Printed in the United States of America. C63 is a registered tra
7、demark in the U.S. Patent (978) 750-8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Errata Users are encouraged to check the IEEE Errata URL (http:/standards.ieee.org/ reading/ieee/updates/er
8、rata/index.html), and the one for ASC C63 at http:/www.c63.org/ explanations_interpretations_request.htm, for errata periodically. Interpretations Current interpretations can be accessed at the following URLs http:/www.c63.org/ explanations_interpretations_request.htm. For more information about the
9、 committee that produced and maintains this standard, visit the ANSI Accredited Standards Committee C63 web site at http:/www.c63.org. Authorized licensed use limited to: Peking University. Downloaded on December 26,2010 at 16:10:46 UTC from IEEE Xplore. Restrictions apply. iv Copyright 2009 IEEE. A
10、ll rights reserved. Introduction This introduction is not part of ANSI C63.2-2009, American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications. In the process of performing a revision of ANSI C63.2-1996 to include radio noise and field stre
11、ngth characteristics for the 1 GHz to 18 GHz frequency range, the Accredited Standards Committee C63 Electromagnetic Compatibility realized that there was a significant duplication of effort occurring between the international and the national EMC standards committees. For example, the specification
12、 ANSI C63.2 mirrored the CISPR 16-1-1:2003 (i.e., originally CISPR 2 and CISPR 3) requirements for the basic field strength instrumentation for the 9 kHz to 1000 MHz frequency range. Consequently, the C63 committee then proposed to adopt CISPR 16, Part 1-1, as the US National Specification for field
13、 strength instrumentation but also retaining the unique requirements that are not in CISPR 16-1-1:2003 and are still used by certain domestic organizations.a These requirements that are not in CISPR 16-1-1 are discussed in Clause 3 of this standard. A comparison between the parameters in these two s
14、tandards is summarized in Annex A. Notice to users Laws and regulations Users of these documents should consult all applicable laws and regulations. Compliance with the provisions of this standard does not imply compliance to any applicable regulatory requirements. Implementers of the standard are r
15、esponsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights This document is copyrighted by
16、the IEEE. It is made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self- regulation, standardization, and the promotion of engineering practices and methods. By making this document available for use an
17、d adoption by public authorities and private users, the IEEE does not waive any rights in copyright to this document. Updating of IEEE documents Users of IEEE standards should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to t
18、ime through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. In order to determine whether a given document is the current edition and
19、whether it has been amended through the issuance of a The reason for not accepting CISPR 16-1-1:2003 verbatim is that legacy requirements in the US cross-reference ANSI C63.2 and those legacy requirements are still enforced. For example, the US Department of Defense cross-references ANSI C63.2 in MI
20、L-STD-461F. Authorized licensed use limited to: Peking University. Downloaded on December 26,2010 at 16:10:46 UTC from IEEE Xplore. Restrictions apply. v Copyright 2009 IEEE. All rights reserved. amendments, corrigenda, or errata, visit the IEEE Standards Association web site at http:/ieeexplore.iee
21、e.org/xpl/standards.jsp, or contact the IEEE at the address listed previously. For more information about the IEEE Standards Association or the IEEE standards development process, visit the IEEE-SA web site at http:/standards.ieee.org. Errata Errata, if any, for this and all other standards can be a
22、ccessed at the following URL: http:/standards.ieee.org/reading/ieee/updates/errata/index.html. Users are encouraged to check this URL for errata periodically. Interpretations Current interpretations can be accessed at the following URL: http:/standards.ieee.org/reading/ieee/interp/ index.html. Paten
23、ts Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. The IEEE is not res
24、ponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in an
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ANSI C63.2-2009 American National Standard for Electromagnetic Noise and Field Strength Instrumentation C63
链接地址:https://www.31doc.com/p-3641369.html