BS EN 10248-1-1996 Hot rolled sheet piling of non alloy steels. Technical delivery conditions1.pdf
《BS EN 10248-1-1996 Hot rolled sheet piling of non alloy steels. Technical delivery conditions1.pdf》由会员分享,可在线阅读,更多相关《BS EN 10248-1-1996 Hot rolled sheet piling of non alloy steels. Technical delivery conditions1.pdf(18页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10248-1:1996 Hot rolled sheet piling of non alloy steels Part 1: Technical delivery conditions The European Standard EN 10248-1:1995 has the status of a British Standard ICS 77.140.70 BS EN 10248-1:1996 This British Standard, having been prepared under the direction of the Eng
2、ineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 March 1996 BSI 12-1999 The following BSI references relate to the work on this standard: Committee reference ISE/12 Draft for comment93/309092 DC ISBN 0 580 24921 2 Committees responsible for
3、this British Standard The preparation of this British Standard was entrusted to Technical Committee ISE/12, Structural steels, upon which the following bodies were represented: BEAMA Ltd. British Constructional Steelwork Association Ltd. British Iron and Steel Producers Association British Railways
4、Board Department of Transport Institution of Structural Engineers Lloyds Register of Shipping National Association of Steel Stockholders Railway Industry Association Society of Motor Manufacturers and Traders Limited Steel Construction Institute Welding Institute Amendments issued since publication
5、Amd. No.DateComments BS EN 10248-1:1996 BSI 12-1999i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 10248-13 List of referencesInside back cover BS EN 10248-1:1996 ii BSI 12-1999 National foreword This British Standard has been prepared by Technical C
6、ommittee ISE/12 and is the English language version of EN 10248-1:1995 Hot rolled sheet piling of non alloy steels Part 1: Technical delivery conditions published by the European Committee for Standardization (CEN). A British Standard does not purport to include all the necessary provisions of a con
7、tract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred toCorresponding British Standard EN 10002-1BS EN 10002 Tensile testing of metallic mate
8、rials Part 1:1990 Method of test at ambient temperature EN 10020BS EN 10020:1991 Definition and classification of grades of steel EN 10021BS EN 10021:1993 General technical delivery requirements for steel and iron products BS EN 10027 Designation systems for steel EN 10027-1Part 1:1992 Steel names,
9、principal symbols EN 10027-2Part 2:1992 Steel numbers EN 10079BS EN 10079:1993 Definition of steel products EN 10204BS EN 10204:1991 Metallic products. Types of inspection documents Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, page
10、s 2 to 12, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10248-1 June 1995 ICS 77.140.7
11、0 Descriptors: Iron and steel products, hot rolled products, sheet pilings, steels, unalloyed steels, chemical composition, grades: quality, classifications, designation, mechanical properties, weldability, surface condition, tests, inspection, marking English version Hot rolled sheet piling of non
12、alloy steels Part 1: Technical delivery conditions Palplanches lamines chaud en aciers non allis Partie 1: Conditions techniques de livraison Warmgewalzte Spundbohlen aus unlegierten Sthlen Teil 1: Technische Lieferbedingungen This European Standard was approved by CEN on 1995-05-19. CEN members are
13、 bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to t
14、he Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same sta
15、tus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Co
16、mit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members. Ref. No. EN 10248-1:1995 E EN 10248-1:1995 BSI 12-1999
17、 2 Foreword This European Standard was prepared by SC4, Sheet piling, of Technical Committee ECISS/TC10, Structural steels Qualities, the secretariat of which is held by NNI. EN 10248 is composed of two parts: Part 1: Technical delivery conditions; Part 2: Tolerances on shape and dimensions. This Eu
18、ropean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 1995, and conflicting national standards shall be withdrawn at the latest by December 1995. According to the CEN/CENELEC International Regulations
19、, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom. Contents Page Foreword2 1Scope3 2Normative references3
20、 3Definitions3 4Information to be supplied by the purchaser3 4.1General3 4.2Options3 5Mass of steel3 6Classification and designation3 6.1Classification3 6.2Designation3 7Technical requirements4 7.1Steel manufacturing process4 7.2Delivery condition4 7.3Chemical composition4 7.4Mechanical properties4
21、7.5Technological properties4 7.6Surface finish6 8Inspection and testing6 8.1General6 8.2Specific inspection and testing6 8.3Inspection units6 8.4Tensile testing6 Page 8.5Verification of the chemical composition7 8.6Internal defects7 8.7Verification of dimensional tolerances7 8.8Inspection documents7
22、 9Marking7 10Options7 Annex A (normative) Location of samples8 Annex B (informative) List of national standards which correspond to referenced Euronorms8 Annex C (informative) List of corresponding former national designations11 Figure A.19 Table 1 Chemical composition of the ladle and product analy
23、sis for hot rolled steel sheet piling5 Table 2 Mechanical properties for hot rolled steel sheet piling6 Table B.1 Euronorms with corresponding national standards10 Table C.1 List of corresponding former national designations11 EN 10248-1:1995 BSI 12-19993 1 Scope This Part of this European Standard
24、specifies the requirements for hot rolled non alloy steel sheet piling in respect of its chemical composition, mechanical properties and conditions of delivery. The products specified are for general, structural and civil engineering works. Requirements in respect of tolerances on shape and dimensio
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10248-1-1996 Hot rolled sheet piling of non alloy steels. Technical delivery conditions1 10248
链接地址:https://www.31doc.com/p-3643195.html