BS EN 13674-3-2006 铁路设施.轨道.钢轨.护轮.pdf
《BS EN 13674-3-2006 铁路设施.轨道.钢轨.护轮.pdf》由会员分享,可在线阅读,更多相关《BS EN 13674-3-2006 铁路设施.轨道.钢轨.护轮.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13674-3:2006 Railway applications Track Rail Part 3: Check rails The European Standard EN 13674-3:2006 has the status of a British Standard ICS 93.100 ? BS EN 13674-3:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee? o
2、n 31 May 2006 BSI 2006 National foreword This British Standard is the official English language version of ? EN 13674-3:2006. The UK participation in its preparation was entrusted to Technical Committee RAE/2,Railway track components, which has the responsibility to: aid enquirers to understand the
3、text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep ? UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committ
4、ee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “ International Standards Correspondence Index” , or by using the “
5、Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from lega
6、l obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 21 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments
7、ISBN 0 580 48360 6 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13674-3 April 2006 ICS 93.100 English Version Railway applications - Track - Rail - Part 3: Check rails Applications ferroviaires - Voie Rails - Partie 3: Contre- rails Bahnanwendungen - Oberbau - Schienen - Teil 3: Radlenkersch
8、ienen This European Standard was approved by CEN on 13 February 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographi
9、cal references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN
10、member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
11、Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels
12、 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13674-3:2006: E EN 13674-3:2006 (E) 2 ContentsPage Foreword3 1Scope5 2Normative references5 3Terms and definitions .5 4Information to be supplied by the purchaser .5 5Steel grad
13、es5 6Profile drawings/properties/mass6 7Manufacture6 7.1Product integrity6 7.2Identification.6 8Acceptance tests .6 8.1Chemical composition 6 8.2Hydrogen7 8.3Hardness.7 8.4Profile tolerances.7 8.5Straightness and twist 8 8.6Cutting 8 8.7Surface quality.8 Annex A (normative) Rail profiles9 Annex ZA (
14、informative) Relationship between this European Standard and the Essential Requirements of EU Directive 96/48/EC of 23 July 1996 on the interoperability of the trans-European high-speed rail system amended by the EU Directive 2004/50/EC of 29 April 2004. 20 Bibliography. 21 ? EN 13674-3:2006 (E) 3 F
15、oreword This European Standard (EN 13674-3:2006) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement,
16、 at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to support Essential Requirements of EU Direct
17、ive 96/48/EC of 23 July 1996 on the interoperability of the trans-European high-speed rail system amended by the Directive 2004/50/EC of the European Parliament and of the Council of 29 April 2004. For relationship with EU directives, see informative Annex ZA, which is an integral part of this Europ
18、ean Standard. This part of EN 13674 is the third of the series EN 13674 Railway applications Track Rail which consists of the following parts: Part 1: Vignole railway rails 46 kg/m and above; Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above; Part 3:
19、Check rails; Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m. Other standards planned for publication include the following: prEN 14587-1 Railway applications Track Flash butt welding of rails Part 1: New R220, R260, R260Mn and R350HT grade rails in a fixed plant; prEN 14587-2 R
20、ailway applications Track Flash butt welding of rails Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than at a fixed plant; prEN 14587-3 Railway applications Track Flash butt welding of rails Part 3: Welding in association with crossing construction;
21、prEN 14730-1 Railway applications Track Aluminothermic welding of rails Part 1: Approval of welding processes; prEN 14730-2 Railway applications Track Aluminothermic welding of rails Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds; prEN 14811 Railway
22、applications Track Special purpose rail Grooved and associated construction; prEN xxxxx Railway applications Track Restoration of rails by electric arc welding. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement t
23、his European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, ? EN 13674-3:2006 (E) 4 Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Swit
24、zerland and United Kingdom. ? EN 13674-3:2006 (E) 5 1 Scope This European Standard specifies check rail profiles which have been designed for this purpose. It does not cover guard rails which are to protect vehicle, bridge, viaduct and other structures in the event of a derailment. Three grades of s
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13674-3-2006 铁路设施.轨道.钢轨.护轮 13674 2006 铁路 设施 轨道 钢轨 护轮
链接地址:https://www.31doc.com/p-3643945.html