BS EN 15059-2009 Snow grooming equipment — Safety requirements.pdf
《BS EN 15059-2009 Snow grooming equipment — Safety requirements.pdf》由会员分享,可在线阅读,更多相关《BS EN 15059-2009 Snow grooming equipment — Safety requirements.pdf(28页珍藏版)》请在三一文库上搜索。
1、? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? BS EN 15059:2009 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15059 March 2009 ICS 97.220.20 English Version Snow grooming equipment - Safety requirements Engins de damage - Exigences de scuritPistenpflegegerte - Sicherheitsanforderunge
2、n This European Standard was approved by CEN on 10 January 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical r
3、eferences concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN mem
4、ber into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
5、 Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 B
6、russels 2009 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15059:2009: E BS EN 15059:2009 EN 15059:2009 (E) 2 Contents Page Foreword 4 Introduction .5 1Scope 6 2Normative references 6 3Terms and definitions .7 4List of significant
7、 hazards 8 5Safety requirements and/or protective measures 9 5.1General 9 5.2Steering system .9 5.3Brakes 10 5.4Setting in motion. 10 5.5Tensioners for tracks . 10 5.6Drivers cab 10 5.7Seat 13 5.8Control systems and their actuators, instruments . 14 5.9Measures to prevent effects dangerous to health
8、 . 14 5.10Lighting systems and recognisability 14 5.11Acoustic warning devices 15 5.12Rear-view mirrors . 15 5.13Equipment holders . 16 5.14Working attachments . 16 5.15Provision for maintenance . 16 5.16Noise 17 5.16.1Noise reduction by design . 17 5.16.2Measurement and declaration of noise emissio
9、n . 17 6Verification of safety requirements and/or protective measures 18 7Information for use . 18 7.1Accompanying documents 18 7.2Machine marking. 20 Annex A (normative) Data . 22 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/3
10、7/EC . 23 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC . 24 Bibliography . 25 ? BS EN 15059:2009 EN 15059:2009 (E) 3 Figures Figure 1 Snow grooming equipment with main components . 8 Figure 2 Deflection limiting volume (
11、DLV); front view .12 Tables Table 1 List of significant hazards . 8 Table 2 Test loads for snow grooming equipment .11 Table 3 Special warning lamp (beacon) .15 Table A.1 Definition of input spectral class 22 Table A.2 Filter cut-off frequencies 22 Table A.3 Characteristics of the simulated input vi
12、bration .22 ? BS EN 15059:2009 EN 15059:2009 (E) 4 Foreword This document (EN 15059:2009) has been prepared by Technical Committee CEN/TC 151 “ Construction equipment and building material machines Safety” , the secretariat of which is held by DIN. This European Standard shall be given the status of
13、 a national standard, either by publication of an identical text or by endorsement, at the latest by December 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the possibility that some of the elements of this document may be the subjec
14、t of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s).
15、 For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bu
16、lgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. ? BS EN 15059:2009 EN 150
17、59:2009 (E) 5 Introduction This document is a Type C standard as stated in EN ISO 12100-1:2003. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this Type C standard are different from
18、 those which are stated in Type A or B standards, the provisions of this Type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this Type C standard. ? BS EN 15059:2009 EN 15059:2009 (E) 6 1 Scope This
19、 standard applies to snow grooming equipment as defined in 3.1 and its use with attachments as described in 3.2. With the exception of rear-mounted snow tillers and front blade attachments, this standard does not deal with the specific hazards of the attachments themselves. This standard is not appl
20、icable to snowmobiles. This standard deals with all significant hazards, hazardous situations and events relevant to snow grooming equipment, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It also deals with hazards dur
21、ing commissioning, use, fault-finding and maintenance. This standard is not applicable to snow grooming equipment manufactured before the date of publication of this document by CEN. NOTE For travelling on public roads, national traffic regulations apply until harmonised requirements are available.
22、2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3-7:2004, Portable fire
23、 extinguishers Part 7: Characteristics, performance requirements and test methods EN 953:1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards EN 1050:1996, Safety of machinery Principles for risk assessment EN 30326-1:1994, Mechanical vibr
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 15059-2009 Snow grooming equipment Safety requirements 15059 2009
链接地址:https://www.31doc.com/p-3643949.html