BS EN 10217-1-2002 压力焊接钢管.交货技术条件.规定室温特性的非合金钢管.pdf
《BS EN 10217-1-2002 压力焊接钢管.交货技术条件.规定室温特性的非合金钢管.pdf》由会员分享,可在线阅读,更多相关《BS EN 10217-1-2002 压力焊接钢管.交货技术条件.规定室温特性的非合金钢管.pdf(44页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10217-1:2002 Incorporating Amendment No. 1 Welded steel tubes for pressure purposes Technical delivery conditions Part 1: Non-alloy steel tubes with specified room temperature properties The European Standard EN 10217-1:2002, with the incorporation of amendment A1:2005, has th
2、e status of a British Standard ICS 23.040.10 BS EN 10217-1:2002 This British Standard, was published under the authority of the Standards Policy and Strategy Committee on 4 July 2002 BSI 6 March 2006 ISBN 0 580 39841 2 National foreword This British Standard is the official English language version
3、of EN 10217-1:2002, including amendment A1:2005. Together with BS EN 10216-1:2002 it supersedes BS 3601:1987 and BS 3059-1:1987 which are withdrawn. The start and finish of text introduced or altered by CEN amendment is indicated in the text by tags . Tags indicating changes to CEN text carry the nu
4、mber of the CEN amendment. For example, text altered by CEN amendment A1 is indicated in the text by . The UK participation in its preparation was entrusted by Technical Committee ISE/73, Steels for pressure purposes, to Subcommittee ISE/73/1, Steel tubes for pressure purposes, which has the respons
5、ibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “I
6、nternational Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users of this publication are responsible for their correct applica
7、tion. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor
8、related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 41 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issu
9、ed. Amendments issued since publication Amd. No. DateComments 154736 March 2006See national foreword 1 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10217-1 May 2002 + A1 January 2005 ICS 23.040.10 English version Welded steel tubes for pressure purposes - Technical delivery conditions - Part
10、 1: Non-alloy steel tubes with specified room temperature properties (includes amendment A1:2005) Tubes souds en acier pour service sous pression - Conditions techniques de livraison - Partie 1: Tubes en acier non alli avec caractristiques spcifies temprature ambiante (inclut lamendement A1:2005) Ge
11、schweite Stahlrohre fr Druckbeanspruchungen - Technische Lieferbedingungen - Teil 1: Rohre aus unlegierten Sthlen mit festgelegten Eigenschaften bei Raumtemperatur (enthlt nderung A1:2005) This European Standard was approved by CEN on 25 April 2002. Amendment A1 was approved by CEN on 9 December 200
12、4. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained o
13、n application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre ha
14、s the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
15、Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CEN All rights of exploitation in any form and by any means reserved worldwide for
16、 CEN national Members. Ref. No. EN 10217-1:2002 + A1:2005 E EN 10217-1:2002 (E) 2 Contents 1SCOPE 5 2NORMATIVE REFERENCES .5 3TERMS AND DEFINITIONS . 6 4SYMBOLS .7 5CLASSIFICATION AND DESIGNATION7 5.1Classification .7 5.2Designation 7 6INFORMATION TO BE SUPPLIED BY THE PURCHASER7 6.1Mandatory inform
17、ation7 6.2Options .8 6.3Example of an order 8 7MANUFACTURING PROCESS 8 7.1Steelmaking process.8 7.2Deoxidation process .8 7.3Tube manufacture and delivery conditions 9 8Requirements.10 8.1General .10 8.2Chemical composition 10 8.3Mechanical properties.12 8.4Appearance and internal soundness. 13 8.5S
18、traightness .14 8.6Preparation of ends.14 8.7Dimensions, masses and tolerances 15 9Inspection .20 9.1Types of inspection.20 9.2Inspection documents 20 9.3Summary of inspection and testing.21 10SAMPLING23 10.1Frequency of tests.23 10.2Preparation of samples and test pieces24 11TEST METHODS.26 11.1Che
19、mical analysis 26 11.2Tensile test on base material .26 11.3Transverse tensile test on the weld.26 11.4Flattening test 26 11.5Drift expanding test.26 11.6Weld bend test .27 11.7Impact test27 11.8Leak tightness test 28 11.9Dimensional inspection 29 11.10Visual examination 29 11.11Non-Destructive Test
20、ing .29 11.12Retest, sorting and reprocessing 29 12MARKING29 12.1Marking to be applied29 12.2Additional marking 30 13PROTECTION .30 Annex A (normative).31 Annex ZA (informative) 40 Bibliography41 EN 10217-1:2002 (E) 3 Foreword This document (EN 10217-1:2002) has been prepared by Technical Committee
21、ECISS/TC 29, “Steel tubes and fittings for steel tubes“, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2002, and conflicting national standards
22、shall be withdrawn at the latest by November 2002. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative annex ZA,
23、 which is an integral part of this document. Other parts of EN 10217 are: Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties. Part 3: Alloy fine grain steel tubes. Part 4 : Electric welded non-alloy and alloy steel tubes with specified low temperat
24、ure properties Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties. Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties. Part 7: Stainless steel tubes. Another European Standard series covering tubes for
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10217-1-2002 压力焊接钢管.交货技术条件.规定室温特性的非合金钢管 10217 2002 压力 焊接 钢管 交货 技术 条件 规定 室温 特性 合金
链接地址:https://www.31doc.com/p-3643973.html