BS EN 14364-2006 塑料管供水系统(有压或无压) 以不饱和聚脂树脂为基础的热固性树脂玻璃增强塑料(简称玻璃钢) 玻璃钢管件和接头规格.pdf
《BS EN 14364-2006 塑料管供水系统(有压或无压) 以不饱和聚脂树脂为基础的热固性树脂玻璃增强塑料(简称玻璃钢) 玻璃钢管件和接头规格.pdf》由会员分享,可在线阅读,更多相关《BS EN 14364-2006 塑料管供水系统(有压或无压) 以不饱和聚脂树脂为基础的热固性树脂玻璃增强塑料(简称玻璃钢) 玻璃钢管件和接头规格.pdf(74页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 14364:2006 Plastics piping systems for drainage and sewerage with or without pressure Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) Specifications for pipes, fittings and joints The European Standard EN 14364:2006 has the status of a B
2、ritish Standard ICS 93.030 ? Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue May 15 11:02:37 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 14364:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2
3、006 BSI 2006 ISBN 0 580 48155 7 National foreword This British Standard is the official English language version of EN 14364:2006. It supersedes BS EN 1115-1:2001, BS EN 1636-3:2001 and BS EN 1636-5:2001 which are withdrawn. This standard, together with BS EN 1796:2006 supersedes BS 5480:1990 which
4、is withdrawn. The UK participation in its preparation was entrusted by Technical Committee PRI/88, Plastics piping systems, to Subcommittee PRI/88/2, Plastics piping for pressure applications, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained o
5、n request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the
6、 BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enqu
7、irers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This documen
8、t comprises a front cover, an inside front cover, the EN title page, pages 2 to 71 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: Institute Of Technology Talla
9、ght, Institute of Technology, Tue May 15 11:02:37 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14364 April 2006 ICS 93.030Supersedes EN 1115-1:1997, EN 1115-3:1996, EN 1115- 5:1996, EN 1636-3:1997, EN 1636-5:1997 English Version Plastics piping syst
10、ems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints Systmes de canalisations en plastiques pour lvacuation et lassainissement avec ou sans pression - Plastique
11、s thermodurcissables renforcs de verre (PRV) base de rsine de polyester non satur (UP) - Spcifications pour tubes, raccords et assemblages Kunststoff-Rohrleitungssyteme fr Abwasserleitungen und - kanle mit oder ohne Druck - Glasfaserverstrkte duroplastische Kunststoffe (GFK) auf der Basis von ungest
12、tigtem Polyesterharz (UP) - Festlegungen fr Rohre, Formstcke und Verbindungen This European Standard was approved by CEN on 3 February 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nati
13、onal standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in an
14、y other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finla
15、nd, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KO
16、MITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14364:2006: E Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue May 15 11:02:37
17、 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 14364:2006 (E) 2 ContentsPage Foreword 5 Introduction. 6 1Scope 7 2Normative references . 8 3Terms, definitions and symbols 9 4General requirements. 17 4.1Classification 17 4.1.1Categories 17 4.1.2Nominal size. 17 4.1.3Nominal stiffness 17 4.1.4Nominal
18、pressure. 17 4.2Materials. 18 4.2.1General 18 4.2.2Reinforcement 18 4.2.3Resin 18 4.2.4Aggregates and fillers 18 4.2.5Elastomers. 19 4.2.6Metals. 19 4.3Wall construction 19 4.3.1Inner layer 19 4.3.2Structural layer. 19 4.3.3Outer layer . 19 4.4Appearance 19 4.5Reference conditions for testing 20 4.5
19、.1Temperature. 20 4.5.2Properties of water for testing 20 4.5.3Loading conditions. 20 4.5.4Preconditioning 20 4.5.5Measurement of dimensions 20 4.6Elapsed time for determination of long-term properties, (x) 20 4.7Joints 20 4.7.1General 20 4.7.2Types of joint 20 4.7.3Flexibility of the jointing syste
20、m . 20 4.7.4Sealing ring 21 4.7.5Adhesives. 21 5Pipes. 21 5.1Geometrical characteristics 21 5.1.1Diameter. 21 5.1.2Wall thickness 25 5.1.3Length 26 5.2Mechanical characteristics. 27 5.2.1Initial specific ring stiffness 27 5.2.2Long-term specific ring stiffness under wet conditions 28 5.2.3Initial re
21、sistance to failure in a deflected condition 29 5.2.4Ultimate long-term resistance to failure in a deflected condition . 31 5.2.5Initial specific longitudinal tensile strength. 32 5.2.6Initial failure and design pressures for pressure pipes 34 5.2.7Long-term failure pressure. 36 5.2.8Resistance to s
22、train corrosion 37 Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue May 15 11:02:37 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 14364:2006 (E) 3 5.3Marking.40 6Fittings40 6.1General.40 6.1.1Diameter series.40 6.1.2Nominal pressure (PN).40 6.1.3Nominal stiffness (SN)40
23、6.1.4Joint type.41 6.1.5Pipe type.41 6.1.6Mechanical characteristics of fittings41 6.1.7Installed leak-tightness of fittings41 6.1.8Dimensions.41 6.2Bends41 6.2.1Classification of bends41 6.2.2Dimensions and tolerances of bends .42 6.3Branches.46 6.3.1Classification of branches.46 6.3.2Dimensions an
24、d tolerances of branches 46 6.4Reducers 50 6.4.1Classification of reducers50 6.4.2Dimensions and tolerances of reducers.50 6.4.3Mechanical characteristics of tapered section laminate.53 6.5Saddles.54 6.5.1Classification of saddles.54 6.5.2Dimensions and tolerances of saddles.55 6.6Flanged adaptors55
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 14364-2006 塑料管供水系统有压或无压 以不饱和聚脂树脂为基础的热固性树脂玻璃增强塑料简称玻璃钢 玻璃钢管件和接头规格 14364 2006 塑料管 供水系统 不饱和 树脂
链接地址:https://www.31doc.com/p-3644108.html