BS EN 14974-2006 Facilities for users of roller sports equipment. Safety requirements and test methods.pdf
《BS EN 14974-2006 Facilities for users of roller sports equipment. Safety requirements and test methods.pdf》由会员分享,可在线阅读,更多相关《BS EN 14974-2006 Facilities for users of roller sports equipment. Safety requirements and test methods.pdf(28页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 14974:2006 Facilities for users of roller sports equipment Safety requirements and test methods The European Standard EN 14974:2006 has the status of a British Standard ICS 97.220.10 ? BS EN 14974:2006 This British Standard was published under the authority of the Standards Po
2、licy and Strategy Committee on 30 March 2007 BSI 2007 ISBN 978 0 580 50365 8 National foreword This British Standard was published by BSI. It is the UK implementation of EN 14974:2006. It supersedes PAS 35:2002 which is withdrawn. The UK participation in its preparation was entrusted to Technical Co
3、mmittee SW/65, Childrens playground equipment. A list of organizations represented on SW/65 can be obtained on request to its secretary. It should be noted that the UK voted in favour of the publication of this standard, however it does not entirely concur with all of its content. Specifically, the
4、UK objected to the maximum permissible upward coping projection as specified in Clause 5.1.2.6. The UK recommended a maximum value of 12mm vice 30mm. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance
5、 with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14974 June 2006 ICS 97.220.10 English Version Facilities for users of roller sports equipment - Safety requirements a
6、nd test methods Installations pour sports roulettes et vlos bicross - Exigences de scurit et mthodes dessai Anlagen fr Benutzer von Rollsportgerten - Sicherheitstechnische Anforderungen und Prfverfahren This European Standard was approved by CEN on 24 May 2006. CEN members are bound to comply with t
7、he CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat
8、or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official ver
9、sions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swe
10、den, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members
11、. Ref. No. EN 14974:2006: E EN 14974:2006 (E) 2 Contents Page Foreword3 Introduction.4 1Scope 5 2Normative references5 3Terms and definitions .6 4Material .7 4.1General7 4.2Timber and associated products .7 4.2.1General7 4.2.2Solid wood8 4.2.3Laminated wood.8 4.2.4Plywood panel8 4.2.5Oriented strand
12、 boards.8 4.2.6Particle boards (chipboards)8 4.3Metals8 4.4Polymer-based composites8 4.5Concrete .9 4.6Other materials.9 4.7Fastenings9 4.7.1General9 4.7.2Bonding 9 4.7.3Metal fastenings.9 5Safety requirements 9 5.1General requirements9 5.1.1General9 5.1.2Design/construction10 5.2Specific requiremen
13、ts for different facilities for users of roller sports equipment13 5.2.1General13 5.2.2Curb.13 5.2.3Ledge 14 5.2.4Rail 14 5.2.5Jump ramp15 5.2.6Platform bank.16 5.2.7Platform transition.16 5.2.8Spine ramp .17 5.2.9Wall ramp18 5.2.10Pyramid bank .19 5.2.11Stair.19 5.2.12Pipe .19 5.2.13Fun box.21 5.3S
14、afety zones.22 5.3.1General22 5.3.2Special requirements for safety zones23 6Testing23 7Marking.24 8Information supplied by the manufacturer .24 8.1General24 8.2Installation24 8.3Inspection and maintenance 24 9Information for users.25 ? EN 14974:2006 (E) 3 Foreword This document (EN 14974:2006) has b
15、een prepared by Technical Committee CEN/TC 136 “ Sports, playground and other recreational equipment” , the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Dec
16、ember 2006, and conflicting national standards shall be withdrawn at the latest by December 2006. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun- tries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republ
17、ic, Denmark, Esto- nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. ? EN 14974:2006 (E) 4 Introduction The use of facilitie
18、s for users of roller sports equipment is connected with sporting risks. Sporting skills and the use of appropriate protective equipment essentially reduces the risk of accident. It is not the intention of this standard to specify every possible shape and construction of facilities for users of roll
19、er sports equipment. For supervised practices, facilities for users of roller sports equipment (competitions, demonstrations, training and initiation) having different dimensions and thus also increased risks, are also acceptable within the frame of legal provisions (e.g. regional building regulatio
20、ns). The development of facilities for users of roller sports equipment is in constant evolution, therefore, some specific structures are not considered in this European Standard. For all such structures the general requirements apply. This European Standard does not specify specific requirements fo
21、r combinations. ? EN 14974:2006 (E) 5 1 Scope This standard applies to facilities for users of inline-skates, roller skates, skateboards or similar roller sports equipment, as well as BMX cycles (hereinafter referred to as facility/facilities). It specifies general and specific requirements and test
22、 methods for facilities used in unsupervised areas. The purpose of this European Standard is to specify the safety requirements, which to a large extent protect users and third parties (e.g. spectators) from hazards when using a facility as intended or as can be reasonably ex- pected. 2 Normative re
23、ferences The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 59, Glass reinforced plastics - Measu
24、rement of hardness by means of a Barcol impressor. EN 206-1, Concrete - Part 1: Specification, performance, production and conformity EN 300:1997, Oriented Strand Boards (OSB) - Definitions, classification and specifications EN 301, Adhesives, phenolic and aminoplastic, for load-bearing timber struc
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 14974-2006 Facilities for users of roller sports equipment. Safety requirements and test methods 14974
链接地址:https://www.31doc.com/p-3644168.html