BS EN 3155-014-2006 航空航天系列.连接部件用电器连接器.第014部分A型、压接、S级插头电连结器.产品标准.pdf
《BS EN 3155-014-2006 航空航天系列.连接部件用电器连接器.第014部分A型、压接、S级插头电连结器.产品标准.pdf》由会员分享,可在线阅读,更多相关《BS EN 3155-014-2006 航空航天系列.连接部件用电器连接器.第014部分A型、压接、S级插头电连结器.产品标准.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 3155-014:2006 Aerospace series Electrical contacts used in elements of connection Part 014: Contacts, electrical, male, type A, crimp, class S Product standard The European Standard EN 3155-014:2006 has the status of a British Standard ICS 49.060 BS EN 3155-014:2006 This Briti
2、sh Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2007 BSI 2007 ISBN 978-0-580-49937-1 National foreword This British Standard was published by BSI. It is the UK implementation of EN 3155-014:2006. The UK participation in its preparation was e
3、ntrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/3, Aerospace Connectors. A list of organizations represented on ACE/6/-/3 can be obtained on request to its secretary. This publication does not purport to include all the necessar
4、y provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments W - - - - - - - - - - 7 7- - 7- -7- - - - - 7- - - - - - - - - - - - - - - - - -
5、- - - - - - - - - - - - - - - - - - - - - - - W W D - - w - - - - 2 Contents Page Foreword3 Introduction.4 1 Scope 4 2 Normative references4 3 Terms and definitions .5 4 Required characteristics.5 5 Designation 11 6 Marking .11 7 Technical specification .11 EN 3155-014:2006 3 Foreword This document
6、(EN 3155-014:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Offici
7、al Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at th
8、e latest by June 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national
9、 standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portug
10、al, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3155-014:2006 4 Introduction The contacts defined by this standard are derived from those of SAE-AS39029/64 and, intermateable with those of SAE-AS39029/63. They are specified as a 200 C class instead of 125 C cla
11、ss as detailed in the MIL standard. 1 Scope This standard specifies the required characteristics, tests and tooling applicable to male electrical contacts 014, type A, crimp, class S, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated
12、female contacts are defined in EN 3155-015. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any ame
13、ndments) applies. ISO 8843, Aircraft Crimp-removable contacts for electrical connectors Identification system. EN 2083, Aerospace series Copper or copper alloy conductors for electrical cables Product standard. EN 2591-*, Aerospace series Elements of electrical and optical connection Test methods. E
14、N 3155-001, Aerospace series Electrical contacts used in elements of connection Part 001: Technical specification. 1) EN 3155-002, Aerospace series Electrical contacts used in elements of connection Part 002: List and utilization of contacts. EN 3155-015, Aerospace series Electrical contacts used in
15、 elements of connection Part 015: Contacts, electrical, female, type A, crimp, class S Product standard. MIL-DTL-22520, Crimping tools, terminal, hand or power actuated, wire termination, and tool kits general specification for. 2) MIL-I-81969, Installing and removal tools, connector electrical cont
16、act, general specification for. 2) SAE-AS39029, Contacts, electrical connector, general specification for. 3) * All its parts quoted in Table 7. 1) Published as ASD Prestandard at the date of publication of this standard. 2) Published by: Department of Defense (DOD), the Pentagon, Washington D.C. 20
17、301 USA. 3) Published by: Society of Automotive Engineering (SAE), 400 Commonwealth Drive, Warrendale, PA 15096, USA. EN 3155-014:2006 5 SAE-AS39029/63, Contacts, electrical connector, socket, crimp removable (for MIL-C-24308 connectors). 3) SAE-AS39029/64, Contacts, electrical connector, pin, crimp
18、 removable (for MIL-C-24308 connectors). 3) 3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 3155-001 apply. 4 Required characteristics 4.1 Specific characteristics Type A contacts are for general application and class S corresponds to an operating tem
19、perature range from 65 C to 200 C. 4.2 Dimensions and mass See Figures 1, 2, 3 and 4 and Table 1. Dimensions and tolerances are given in millimetres and apply after surface treatment. 1 2 3 010 Diameter general concentricity 0,025 C and D Key 1 Colour bands, see Table 2. 2 E (one side only). 3 Conta
20、ct active area protection Figure 1 EN 3155-014:2006 6 Figure 2 Figure 3 Barrel 20-20 1 Key 1 14 to 16 Figure 4 Barrel 20-22 Table 1 Size A B C D E F G H K Contact Barrel max. Mass g max. 20 22 1,04 0,99 2,16 2,08 1,80 1,73 0,90 0,85 0,85 0,60 0,30 4,70 3,60 1,40 1,24 0,15 0,10 0,15 20 20 1,04 0,99 2
21、,16 2,08 1,80 1,73 1,17 1,09 0,85 0,60 0,30 4,70 3,60 1,40 1,24 0,15 0,10 0,15 20 18 1,04 0,99 2,16 2,08 1,80 1,73 1,35 1,30 0,85 0,60 0,30 4,70 3,60 1,40 1,24 0,15 0,10 0,15 4.3 Marking by colour code See Table 2. EN 3155-014:2006 7 Table 2 Size Two bands according to ISO 8843 Three bands according
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 3155-014-2006 航空航天系列.连接部件用电器连接器.第014部分A型、压接、S级插头电连结器.产品标准 3155 014 2006 航空航天 系列 连接 部件 用电 连接器 部分
链接地址:https://www.31doc.com/p-3644204.html