BS EN 13411-6-2004 钢丝绳终端设备 安全性 第6部分:不对称楔形座U形夹.pdf
《BS EN 13411-6-2004 钢丝绳终端设备 安全性 第6部分:不对称楔形座U形夹.pdf》由会员分享,可在线阅读,更多相关《BS EN 13411-6-2004 钢丝绳终端设备 安全性 第6部分:不对称楔形座U形夹.pdf(26页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13411-6:2004 Terminations for steel wire ropes Safety Part 6: Asymmetric wedge socket The European Standard EN 13411-6:2004 has the status of a British Standard ICS 53.020.30; 77.140.99 ? Licensed Copy: London South Bank University, London South Bank University, Sat Mar 18 06:
2、55:25 GMT 2006, Uncontrolled Copy, (c) BSI BS EN 13411-6:2004 This British Standard, was published under the authority of the Standards Policy and Strategy Committee on 7 July 2004 BSI 7 July 2004 ISBN 0 580 44022 2 National foreword This British Standard is the official English language version of
3、EN 13411-6:2004. It supersedes BS 7166:1989 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee MHE/2, Wire ropes, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-re
4、ferences The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “ International Standards Correspondence Index” , or by using the “ Search” facility of the BSI Electronic Catalogue or of B
5、ritish Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; pre
6、sent to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an
7、 inside front cover, the EN title page, pages 2 to 23 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University
8、, Sat Mar 18 06:55:25 GMT 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13411-6 June 2004 ICS 53.020.30; 77.140.99 English version Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket Terminaisons pour cbles en acier - Scurit - Partie 6
9、: Bote coin asymtrique Endverbindungen fr Drahtseile aus Stahldraht - Sicherheit - Teil 6: Asymmetrische Seilschlsser This European Standard was approved by CEN on 24 March 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
10、European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (Eng
11、lish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, C
12、zech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE
13、 NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13411-6:2004: E Licensed Copy: London South Bank University, London South Bank
14、 University, Sat Mar 18 06:55:25 GMT 2006, Uncontrolled Copy, (c) BSI EN 13411-6:2004 (E) 2 Contents page Foreword3 Introduction.4 1 Scope 5 2 Normative references5 3 Terms and definitions .5 4 List of significant hazards 6 5 Safety requirements and/or measures7 6 Verification of safety requirements
15、9 7 Information for use12 Annex A (informative) Asymmetric wedge socket with cast socket body Design 1.13 Annex B (informative) Asymmetric wedge socket with cast socket body Design 2.16 Annex C (informative) Recommendations for safe use and inspection19 Annex ZA (informative) Relationship of this do
16、cument with EC Directives22 Bibliography23 Licensed Copy: London South Bank University, London South Bank University, Sat Mar 18 06:55:25 GMT 2006, Uncontrolled Copy, (c) BSI ? EN 13411-6:2004 (E) 3 Foreword This document (EN 13411-6:2004) has been prepared by Technical Committee CEN/TC 168 “ Chains
17、, ropes, webbing, slings and accessories - Safety” , the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2004, and conflicting national standards shal
18、l be withdrawn at the latest by December 2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). For relationship with EC Directive(s), see informative annex ZA, whi
19、ch is an integral part of this document. Annexes A, B and C are informative. This document includes a Bibliography. EN 13411 with the general title Terminations for steel wire ropes Safety, consists of the following parts: Part 1: Thimbles for steel wire rope slings Part 2: Splicing of eyes for wire
20、 rope slings Part 3: Ferrules and ferrule-securing Part 4: Metal and resin socketing Part 5: U-bolt wire rope grips Part 6: Asymmeteric wedge socket Part 7: Symmetric wedge socket This is the first edition of this Part of this European Standard. According to the CEN/CENELEC Internal Regulations, the
21、 national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Polan
22、d, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: London South Bank University, London South Bank University, Sat Mar 18 06:55:25 GMT 2006, Uncontrolled Copy, (c) BSI ? EN 13411-6:2004 (E) 4 Introduction This European Standard is a Type C Standard as stat
23、ed in EN 1070. This European Standard has been prepared to provide a means of conforming with the essential requirements of the Machinery Directive and associated EFTA regulations. Purchasers ordering to this standard are advised to specify in their purchasing contract that the supplier operates an
24、independently verified quality assurance system to ensure themselves that products claimed to comply consistently achieve the required level of quality. The wedge sockets concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this documen
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13411-6-2004 钢丝绳终端设备 安全性 第6部分:不对称楔形座U形夹 13411 2004 钢丝绳 终端设备 部分 不对称 楔形 形夹
链接地址:https://www.31doc.com/p-3644218.html