BS EN 13523-6-2002 卷材覆层金属.试验方法.做成刻纹后粘结(杯形挤压试验).pdf
《BS EN 13523-6-2002 卷材覆层金属.试验方法.做成刻纹后粘结(杯形挤压试验).pdf》由会员分享,可在线阅读,更多相关《BS EN 13523-6-2002 卷材覆层金属.试验方法.做成刻纹后粘结(杯形挤压试验).pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13523-6:2002 Coil coated metals Test methods Part 6: Adhesion after indentation (cupping test) The European Standard EN 13523-6:2002 has the status of a British Standard ICS 17.040.20; 25.220.60 - - - - - - - - - - - BS EN 13523-6:2002 This British Standard, having been prepar
2、ed under the direction of the Materials and Chemicals Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 8 August 2002 BSI 8 August 2002 ISBN 0 580 40222 3 National foreword This British Standard is the official English language
3、version of EN 13523-6:2002. The UK participation in its preparation was entrusted to Technical Committee STI/27, Paint systems for metallic substrates, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references
4、 The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Stan
5、dards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13523-6-2002 卷材覆层金属.试验方法.做成刻纹后粘结杯形挤压试验 13523 2002 卷材 覆层 金属 试验 方法 做成 刻纹后 粘结 挤压
链接地址:https://www.31doc.com/p-3644243.html