BS EN 1777-2004+A1-2009 消防和救援设备用液压平台(HPs).安全性要求和测试.pdf
《BS EN 1777-2004+A1-2009 消防和救援设备用液压平台(HPs).安全性要求和测试.pdf》由会员分享,可在线阅读,更多相关《BS EN 1777-2004+A1-2009 消防和救援设备用液压平台(HPs).安全性要求和测试.pdf(92页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 1777:2004 +A1:2009 Hydraulic platforms (HPs) for fire fighting and rescue services Safety requirements and testing ICS 13.220.10 BS EN 1777:2004+A1:2009 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 18 November 2004 B
2、SI 2009 ISBN 978 0 580 60406 5 National foreword This British Standard is the UK implementation of EN 1777:2004+A1:2009. It supersedes BS EN 1777:2004, which is withdrawn. The start and finish of text introduced or altered by amendment in the text by tags. Tags indicating changes to CEN text carry t
3、he number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by. FSH/17, Fire brigade equipment, to Subcommittee FSH/17/3, Fire appliances. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not pu
4、rport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard confer immunity legal obligations. Amendments/corrigenda issued since publication DateComments Implementation of CEN amendment A1:2009 The UK participati
5、on in its preparation was entrusted by Technical Committee 31 ay 2009 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1777:2004+A1 March 2009 ICS 13.220.10 Supersedes EN 1777:2004 English Version Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing B
6、ras levateur Arien (BEA) des services dincendie et de secours - Prescriptions de scurit et essais Hubrettungsfahrzeuge fr Feuerwehren und Rettungsdienste, Hubarbeitsbhnen (HABn) - Sicherheitstechnische Anforderungen und Prfung This European Standard was approved by CEN on 2 September 2004 and includ
7、es Amendment 1 approved by CEN on 11 January 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references conc
8、erning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respons bility of a CEN member into its o
9、wn language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithu
10、ania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 C
11、EN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1777:2004+A1:2009: E EN 1777:2004+A1:2009 (E) 2 Contents Page Foreword . 3 Introduction 4 1Scope 6 2Normative references . 7 3Terms and definitions . 7 4List of significant hazards 10
12、5Safety requirements and/or protective measures . 14 6Verification . 38 7Information for use . 41 Annex A (informative) Special loads and forces Use of HPs in wind speeds greater than Beaufort scale 6 (5.2.3.4.1) . 65 Annex B (informative) Dynamic factors in stability and structural calculations . 6
13、6 Annex C (informative) Major alterations and repairs 68 Annex D (normative) Design of wire rope drive systems for the extending structures and platform levelling systems . 69 Annex E (informative) Calculation example of Annex D for wire rope, drum and pulley diameters . 78 Annex F (informative) Cal
14、culation example Dynamic factor, kerb test (see 5.2.4.1.1) . 84 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC . 86 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Dir
15、ective 2006/42/EC“ . 87 Bibliography . 88 EN 1777:2004+A1:2009 (E) 3 Foreword This document (EN 1777:2004+A1:2009) has been prepared by Technical Committee CEN/TC 192 “Fire service equipment”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national sta
16、ndard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2009-01-11. This document supersedes EN 1777:2004. The st
17、art and finish of text introduced or altered by amendment is indicated in the text by tags ! “ This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship wi
18、th EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ This document includes a Bibliography. It is one of a series of standards produced by CEN/TC 192 as part of the CEN/CENELEC programme of work to produce machine safety standards. It is based on the wor
19、k of CEN/TC 98 EN 280 Mobile Elevating Work Platforms (MEWPs), and allows for future adaptation of any type and size of MEWP to firefighting and rescue. Because of the wide variety of sizes and types of Hydraulic Platforms (HPs), it is not a detailed specification and performance specifications othe
20、r than safety requirements are a matter for agreement between suppliers and customers. It is intended to be used in conjunction with Parts 1 and 2 of EN 1846. It was accepted that the safety related parts of the control system would need to be reformulated to take account of the methodology of EN 95
21、4 but, in view of the further delays to publication this would cause, it was decided to defer this to a second stage. Similarly, it was accepted that re-consideration of the need for load control on HPs with a single rated load should be deferred to a second stage, to avoid further delays to publica
22、tion of the standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ice
23、land, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 1777:2004+A1:2009 EN 1777:2004+A1:2009 (E) 4 Introduction This document has been prepared to be a harmonized standard t
24、o provide one means of conforming with the essential safety requirements of the Machinery Directive and its amending Directives, and associated EFTA Regulations. It is a type C standard as stated in EN 1070. The machinery concerned and the extent to which hazards, hazardous situations and events are
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 1777-2004+A1-2009 消防和救援设备用液压平台HPs.安全性要求和测试 1777 2004 A1 2009 消防 救援 备用 液压 平台 HPs 安全性 要求 测试
链接地址:https://www.31doc.com/p-3644265.html