BS EN 1757-3-2002 Safety of industrial trucks.pdf
《BS EN 1757-3-2002 Safety of industrial trucks.pdf》由会员分享,可在线阅读,更多相关《BS EN 1757-3-2002 Safety of industrial trucks.pdf(26页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 1757-3:2002 Safety of industrial trucks Pedestrian controlled manual and semi-manual trucks Part 3: Platform trucks The European Standard EN 1757-3:2002 has the status of a British Standard ICS 53.060 ? Licensed copy: FULLNAME, COMPANY, DATE, Uncontrolled copy BS EN 1757-3:200
2、2 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 29 November 2002 BSI 29 November 2002 ISBN 0 580 40881 7 National foreword This British Stand
3、ard is the official English language version of EN 1757-3:2002. The UK participation in its preparation was entrusted to Technical Committee MHE/7, Industrial trucks Safety, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secre
4、tary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “ International Standards Correspondence Index” , or by using the “ Search” facility of the BSI Electronic Cat
5、alogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand
6、 the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a f
7、ront cover, an inside front cover, the EN title page, pages 2 to 23 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed copy: FULLNAME, COMPANY, DATE, Uncontrolled copy EUR
8、OPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1757-3 November 2002 ICS 53.060 English version Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3: Platform trucks Scurit des chariots de manutention - Chariots conducteur pied manuels et semi-manuels - Partie
9、 3: Chariots plateau fixe Sicherheit von Flurfrderzeugen - Handbetriebene und teilweise handbetriebene Flurfrderzeuge - Teil 3: Plattformwagen This European Standard was approved by CEN on 2 September 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
10、 conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in th
11、ree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Aus
12、tria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Man
13、agement Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1757-3:2002 E Licensed copy: FULLNAME, COMPANY, DATE, Uncontrolled copy EN 1757-3:2002 (E) 2 Contents page Foreword3 0Introduct
14、ion5 1Scope 5 2Normative references6 3Terms and definitions6 4List of hazards7 5Requirements.9 5.1Design and construction forces for truck.9 5.2Propelling, steering .9 5.3Wheels and castors.10 5.4Parking brake .11 5.5Stability.11 5.6Protection against crushing and shearing points11 5.7Edges and angl
15、es 11 6Verifications of safety requirements and/or measures11 6.1General11 6.2Design verification on truck type.12 6.3Functional routine verification .12 7Information for use13 7.1Instruction label or handbook 13 7.2Minimum marking14 Annex A (normative) Method for measurement of forces (F).15 A.0Con
16、ditions for test.15 A.1Measurement of starting force and rolling force15 A.2Measurement of the steering force15 Annex B (normative) Stability tests for pedestrian propelled industrial platform trucks .18 B.1Conditions of validity 18 B.2Acceptance conditions18 B.3Description of tests .18 Bibliography
17、23 Licensed copy: FULLNAME, COMPANY, DATE, Uncontrolled copy ? EN 1757-3:2002 (E) 3 Foreword This document EN 1757-3:2002 has been prepared by Technical Committee CEN/TC 150 “Industrial trucks - Safety“, the secretariat of which is held by BSI. This European Standard shall be given the status of a n
18、ational standard, either by publication of an identical text or by endorsement, at the latest by May 2003, and conflicting national standards shall be withdrawn at the latest by May 2003. This European Standard is one of a series of European Standards for the safety of Industrial trucks. This series
19、 of standards includes: EN 1175Safety of Industrial trucks - Electrical requirements for trucks Part 1:General requirement for battery powered trucks Part 2:General requirements for internal combustion engine powered trucks Part 3:Specific requirements for the electrical power transmission systems o
20、f internal combustion engine powered trucks EN 1459Safety of industrial trucks - Self propelled variable reach trucks EN 1525Safety of industrial trucks - Driverless trucks and their systems EN 1526Safety of industrial trucks - Additional requirements for automated functions on trucks EN 1551Safety
21、of industrial trucks - Self propelled trucks over 10 000 kg capacity EN 1726Safety of industrial trucks - Self propelled trucks up to and including 10 000 kg capacity and tractors with a drawbar pull up to and including 20 000 N Part 1:General requirements Part 2:Additional requirements for trucks w
22、ith elevating operator position and trucks specifically designed to travel with elevated loads EN 1755Safety of industrial trucks - Operation in potentially hazardous atmospheres Use in inflammable gas, vapour, mist and dust EN 1757Safety of industrial trucks - Pedestrian propelled trucks Part 1: St
23、acker trucks Part 2: Pallet trucks Part 3: Platform trucks Part 4: Scissor lift pallet trucks EN 12053 Safety of industrial trucks - Test methods for measuring noise emissions EN 12895 Safety of industrial trucks - Electromagnetic compatibility EN 13059 Safety of industrial trucks - Test methods for
24、 measuring vibration prEN ISO 13564 Safety of industrial trucks - Test methods for measuring visibility from self-propelled trucks (ISO/DIS 13564:1996) Annexes A and B are normative. Licensed copy: FULLNAME, COMPANY, DATE, Uncontrolled copy ? EN 1757-3:2002 (E) 4 According to the CEN/CENELEC Interna
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 1757-3-2002 Safety of industrial trucks 1757 2002
链接地址:https://www.31doc.com/p-3644301.html