BS EN 3155-017-2006 航空航天系列.用于连接元件的电触点.P级、压接、A型、继电器基插座电触点.产品标准.pdf
《BS EN 3155-017-2006 航空航天系列.用于连接元件的电触点.P级、压接、A型、继电器基插座电触点.产品标准.pdf》由会员分享,可在线阅读,更多相关《BS EN 3155-017-2006 航空航天系列.用于连接元件的电触点.P级、压接、A型、继电器基插座电触点.产品标准.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD AEROSPACE SERIES BS EN 3155-017:2006 Electrical contacts used in elements of connection Part 017: Contacts, electrical, relay base, female, type A, crimp, class P Product standard The European Standard EN 3155-017:2006 has the status of a British Standard ICS 49.060 BS EN 3155-017:2
2、006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2006 BSI 2006 ISBN 0 580 48973 6 National foreword This British Standard is the official English language version of EN 3155-017:2006. The UK participation in its preparation was ent
3、rusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/3, Aerospace Connectors, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The B
4、ritish Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards
5、Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the respo
6、nsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover,
7、the EN title page, pages 2 to 10, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments W - - - - - - - - - - - 7 7- - 7- -7- - - - - 7- - - - - - - - - - - $ -
8、 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - W W D - - w - - - - 2 Contents Page Foreword3 0 Introduction4 1 Scope 4 2 Normative references4 3Definitions 5 4 Required characteristics.5 5 Designation . 10 6 Marking 10 7 Technical specification 10 EN 3155-017:2006 3 Foreword Th
9、is European Standard (EN 3155-017:2006) has been prepared by the AeroSpace and Defense Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re- ceived the approval of the National Asso
10、ciations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standard
11、s shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Inter
12、nal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den- mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem- bourg, Malta, Ne
13、therlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer- land and the United Kingdom. EN 3155-017:2006 4 0 Introduction The contacts defined by this standard are derived from those of MIL-C-39029/92. 1 Scope This standard specifies the required characteristics, tests
14、 and tooling applicable to female electrical con- tacts 017, type A, crimp, class P, used in elements of connection (relay bases) according to EN 3155-002. It shall be used together with EN 3155-001. The associated male contacts are defined in the standards of relays associated to the relay bases li
15、sted in EN 3155-002. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer- ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO
16、 8843, Aircraft Crimp-removable contacts for electrical connectors Identification system EN 2083; Aerospace series Copper or copper alloy conductors for electrical cables Product standard EN 2591 (series), Aerospace series Elements of electrical and optical connection Test methods EN 3155-001, Aeros
17、pace series Electrical contacts used in elements of connection Part 001: Technical specification EN 3155-002, Aerospace series Electrical contacts used in elements of connection Part 002: List and utilization of contacts MIL-DTL-22520, Crimping tools, terminal, hand or power actuated, wire terminati
18、on, and tool kits, general specification for 1) MIL-C-22520/1, Crimping tools, terminal, hand, wire termination for wire barrel sizes 12 through 201) MIL-C-22520/2, Crimping tools, terminal, hand, wire termination for wire barrel sizes 20 through 281) MIL-C-22520/7, Crimping tools, terminal, hand, w
19、ire termination for wire barrel sizes 16, 20 and 221) MIL-C-39029, Contacts, electrical connector, general specification for1) MIL-C-39029/92, Contacts, electrical connector, socket, crimp removable, (for MIL-R-6106 and MIL-S-12833/40 and /41 relay sockets) 1) MIL-I-81969, Installing and removal too
20、ls, connector electrical contact, general specification for1) MIL-I-81969/14, Installing and removal tools, connector electrical contact, type III, class 2, composition B1) MIL-I-81969/30, Installing and removal tools, connector electrical contact, type II, class 2, composition C for unwired1) 1) Pu
21、blished by: Department of Defense (DOD), the Pentagon, Washington D.C. 20301 USA. EN 3155-017:2006 5 3 Definitions For the purposes of this standard, the definitions given in EN 3155-001 apply. 4 Required characteristics 4.1 Specific characteristics Type A contacts are for general application and cl
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 3155-017-2006 航空航天系列.用于连接元件的电触点.P级、压接、A型、继电器基插座电触点.产品标准 3155 017 2006 航空航天 系列 用于 连接 元件 触点 压接 继电器
链接地址:https://www.31doc.com/p-3644370.html