BS EN 13263-2-2005+A1-2009 混凝土用含硅烟气.一致性评估.pdf
《BS EN 13263-2-2005+A1-2009 混凝土用含硅烟气.一致性评估.pdf》由会员分享,可在线阅读,更多相关《BS EN 13263-2-2005+A1-2009 混凝土用含硅烟气.一致性评估.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13263-2:2005 Silica fume for concrete Part 2: Conformity evaluation ICS 91.100.30 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - w - - - - - - - - - - - - - - -
2、 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - blank - - - - - - EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13263-2:2005+A1 March 2009 ICS 91.100.30 Supersedes EN 13263-2:2005 English Version Silica fume for concrete - Part 2:
3、 Conformity evaluation Fume de silice pour bton - Partie 2: Evaluation de la conformit Silikastaub fr Beton - Teil 2: Konformittsbewertung This European Standard was approved by CEN on 19 May 2005 and includes Amendment 1 approved by CEN on 8 February 2009. CEN members are bound to comply with the C
4、EN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or
5、 to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official ver
6、sions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
7、Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nationa
8、l Members. Ref. No. EN 13263-2:2005+A1:2009: E - - - - - - EN 13263-2:2005+A1:2009 (E) 2 Contents Page Foreword 3 1Scope 4 2Normative references 4 3Terms and definitions .4 4Tasks for the manufacturer 8 4.1Factory production control .8 4.2Internal quality control 9 4.3Autocontrol testing of samples
9、. 11 4.4Further testing of samples . 11 5Tasks for the certification body 12 5.1General . 12 5.2Surveillance, assessment and acceptance of the factory production control . 12 5.3Evaluation of the results of autocontrol testing of samples 12 5.4Audit testing of samples taken at the production plant/d
10、epot and initial type testing . 13 5.5Initial inspection of the production facilities and the factory production control . 14 5.6Evaluation of test results during the initial period 15 6Actions in the event of non-conformity 15 6.1Actions to be taken by the manufacturer . 15 6.2Actions to be taken b
11、y the certification body 15 7Procedure for third party certification of conformity 16 8Certificate of conformity and conformity mark . 16 8.1Indication of conformity . 16 8.2Certificate of conformity 17 8.3Conformity mark . 17 Bibliography . 19 BS EN 13263-2:2005+A1:2009 - - - - - - EN 13263-2:2005+
12、A1:2009 (E) 3 Foreword This document (EN 13263-2:2005+A1:2009) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical
13、text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. This document includes Amendment 1, approved by CEN on 2009-02-08. This document supersedes EN 13263-2:2005. The start and finish of text introduced or alte
14、red by amendment is indicated in the text by tags ! “ EN 13263 has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, w
15、hich is an integral part of Part 1 of EN 13263. !EN 13263-2:2005+A1:2009 contains a deletion of the second paragraph of 4.2.2.2.“ EN 13263 consists of the following parts, under the general title Silica fume for concrete: Part 1: Definitions, requirements and conformity criteria; Part 2: Conformity
16、evaluation. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irel
17、and, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 13263-2:2005+A1:2009 - - - - - - EN 13263-2:2005+A1:2009 (E) 4 1 Scope This part of EN 13263 specifies the scheme for the evaluat
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13263-2-2005+A1-2009 混凝土用含硅烟气.一致性评估 13263 2005 A1 2009 混凝土 用含硅 烟气 一致性 评估
链接地址:https://www.31doc.com/p-3644382.html