BS EN 3155-070-2007 航空航天系列.连接元件用电连接器.第070部分S级、压接、A类电连接器插头.产品标准.pdf
《BS EN 3155-070-2007 航空航天系列.连接元件用电连接器.第070部分S级、压接、A类电连接器插头.产品标准.pdf》由会员分享,可在线阅读,更多相关《BS EN 3155-070-2007 航空航天系列.连接元件用电连接器.第070部分S级、压接、A类电连接器插头.产品标准.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 3155-070:2007 Aerospace series Electrical contacts used in elements of connection Part 070: Contacts, electrical, male, type A, crimp, class S Product standard ICS 49.060 BS EN 3155-070:2007 This British Standard was published under the authority of the Standards Policy and St
2、rategy Committee on 29 February 2008 BSI 2008 ISBN 978 0 580 55880 1 National foreword This British Standard is the UK implementation of EN 3155-070:2007. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to P
3、anel ACE/6/-/3, Aerospace Connectors. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a Briti
4、sh Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication DateComments W - - - - - - - - - - 7 7- - 7- -7- - - - - 7- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - W W D - - w - - - - 2 Contents Page Introduction.3 1 S
5、cope 4 2 Normative references4 3 Terms and definitions .5 4 Required characteristics.5 4.1 Specific characteristics.5 4.2 Dimensions and mass.5 4.3 Marking by colour code 7 4.4 Material, surface treatment.7 4.5 Permissible cables.7 4.6 Tooling7 4.7 Cable stripping.8 4.8 Tests8 4.9 Gauges10 5 Designa
6、tion 10 6 Marking .10 7 Technical specification .10 EN 3155-070:2007 3 Foreword This document (EN 3155-070:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this As
7、sociation, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endors
8、ement, at the latest by June 2008, and conflicting national standards shall be withdrawn at the latest by June 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying
9、any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hun
10、gary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3155-070:2007 4 Introduction The contacts defined by this standard are derived from those of SAE-AS39029/58 a
11、nd intermateable with those of SAE-AS39029/56 and SAE-AS39029/57. 1 Scope This standard specifies the required characteristics, tests and tooling applicable to male electrical contacts 070, type A, crimp, class S, used in elements of connection according to EN 3155-002. It shall be used together wit
12、h EN 3155-001. The associated female contacts are defined in EN 3155-003, EN 3155-009 and EN 3155-071. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the l
13、atest edition of the referenced document (including any amendments) applies. ISO 8843, Aircraft Crimp-removable contacts for electrical connectors Identification system. EN 2083, Aerospace series Copper or copper alloys conductors for electrical cables Product standard. EN 2591-*, Aerospace series E
14、lements of electrical and optical connection Test methods. EN 3155-001, Aerospace series Electrical contacts used in elements of connection Part 001: Technical specification. 1) EN 3155-002, Aerospace series Electrical contacts used in elements of connection Part 002: List and utilization of contact
15、s. EN 3155-003, Aerospace series Electrical contacts used in elements of connection Part 003: Contacts, electrical, female, type A, crimp, class S Product standard. EN 3155-009, Aerospace series Electrical contacts used in elements of connection Part 009: Contacts, electrical, female, type A, crimp,
16、 class S Product standard. EN 3155-071, Aerospace series Electrical contacts used in elements of connection Part 071: Contacts, electrical, female, type A, crimp, class S Product standard. EN 4434, Aerospace series Copper or copper alloy lightweight conductors for electrical cables Product standard
17、(Normal and tight tolerances). * All parts quoted in Table 7. 1) Published as ASD Prestandard at the date of publication of this standard. EN 3155-070:2007 5 MIL-DTL-22520, Crimping tools, wire termination, general specification for. 2) MIL-I-81969, Installing and removal tools, connector electrical
18、 contact, general specification for. 2) SAE-AS39029, Contacts, electrical connector, general specification for. 3) SAE-AS39029/56, Contacts, electrical connector, socket, crimp removable (for MIL-C-38999 series I, III and IV connectors). 3) SAE-AS39029/57, Contacts, electrical connector, socket, cri
19、mp removable (for MIL-C-24308, MIL-C-38999 series II, MIL-C-55302/68, /71, /72, /75 and MIL-C-83733 connectors). 3) SAE-AS39029/58, Contacts, electrical connector, pin, crimp removable (for MIL-C-24308, MIL-C-38999 series I, II, III, and IV and MIL-C-55302/69 and MIL-C-83733 connectors). 3) 3 Terms
20、and definitions For the purposes of this standard, the terms and definitions given in EN 3155-001 apply. 4 Required characteristics 4.1 Specific characteristics Type A contacts are for general application and class S corresponds to an operating temperature range from 65 C to 200 C. 4.2 Dimensions an
21、d mass See Figure 1 and Table 1. Dimensions and tolerances are given in millimetres and apply after surface treatment. 2) Published by: Department of Defense (DOD), the Pentagon, Washington D.C. 20301 USA. 3) Published by: Society of Automotive Engineering (SAE), 400 Commonwealth Drive, Warrendale,
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 3155-070-2007 航空航天系列.连接元件用电连接器.第070部分S级、压接、A类电连接器插头.产品标准 3155 070 2007 航空航天 系列 连接 元件 用电 连接器 部分
链接地址:https://www.31doc.com/p-3644404.html