BS EN 3155-059-2006 航空航天系列.部件连接用电触点.第059部分R级、钎焊、D型、插座、尺寸16的同轴电触点.产品标准.pdf
《BS EN 3155-059-2006 航空航天系列.部件连接用电触点.第059部分R级、钎焊、D型、插座、尺寸16的同轴电触点.产品标准.pdf》由会员分享,可在线阅读,更多相关《BS EN 3155-059-2006 航空航天系列.部件连接用电触点.第059部分R级、钎焊、D型、插座、尺寸16的同轴电触点.产品标准.pdf(18页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 3155-059:2006 Aerospace series Electrical contacts used in elements of connection Part 059: Contacts, electrical, coaxial, size 16, female, type D, solder, class R Product standard The European Standard EN 3155-059:2006 has the status of a British Standard ICS 49.060 BS EN 315
2、5-059:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2007 BSI 2007 ISBN 978-0-580-49942-5 National foreword This British Standard was published by BSI. It is the UK implementation of EN 3155-059:2006. The UK participation in
3、its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/3, Aerospace Connectors. A list of organizations represented on ACE/6/-/3 can be obtained on request to its secretary. This publication does not purport to inc
4、lude all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments W - - - - - - - - - 7 7- - 7- -7- - - - - 7- - - - - - - *A
5、* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - W W D - - w - - - - - - - 2 Contents Page Foreword3 Introduction.4 1 Scope 4 2 Normative references4 3 Definitions 5 4 Required characteristics.5 4.1 Specific characteristics.5 4.2 Dimensions and mass.5 4.3 Marking by colour code
6、5 4.4 Material, surface treatment.5 4.5 Permissible cables.6 4.6 Stripping of cables and wiring method .7 4.7 Tooling9 4.8 Tests11 4.9 Gauge13 5 Designation 13 6 Marking .14 7 Technical specification .14 EN 3155-059:2006 3 Foreword This document (EN 3155-059:2006) has been prepared by the Aerospace
7、and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to i
8、ts presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. According to the CEN/CENELEC In
9、ternal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Net
10、herlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3155-059:2006 4 Introduction The contacts defined by this standard are derived from those of MIL-C-39029/77 and are intermateable with those of MIL-C-39029/76. 1 Scope This standard
11、 specifies the required characteristics, tests and tooling applicable to size 16, female coaxial, electrical contacts, type D, solder, class R, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated male contacts are defined in EN 3155-058
12、. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591 (all parts), Aer
13、ospace series Elements of electrical and optical connection Test methods EN 3155-001, Aerospace series Electrical contacts used in elements of connection Part 001: Technical specification 1) EN 3155-002, Aerospace series Electrical contacts used in elements of connection Part 002: List and utilizati
14、on of contacts EN 3155-058, Electrical contacts used in elements of connection Part 058: Contacts, electrical, coaxial, size 16, male, type D, solder, class R Product standard MIL-A-8243D, Anti-icing and deicing-defrosting fluids 2) MIL-C-25769J, Cleaning compound, aircraft surface, alkaline water b
15、ase 2) MIL-C-39029/76, Contacts, electrical connector, pin, crimp, removable, shielded, size 16, (for MIL-C-38999 Series I, II, III, IV and MIL-C-24308 connectors) 2) MIL-C-39029/77, Contacts, electrical connector, socket, crimp, removable, shielded, size 16, (for MIL-C-38999 Series I, III, IV conne
16、ctors) 2) MIL-H-5606E, Hydraulic fluid, petroleum base, aircraft, missile and ordnance 2) MIL-I-81969B, Installing and removal tools, connector electrical contact, type II, class 2, composition C 2) MIL-I-81969/08B, Installing and removal tools, connector electrical contact, types I and II, class 2,
17、 composition A 2) 1) Published at ASD Prestandard at the date of publication of this standard. 2) Published by: Department of Defense (DOD), the Pentagon, Washington D.C. 20301 USA. EN 3155-059:2006 5 MIL-I-81969/14C, Installing and removal tools, connector electrical contact, type III, class 2, com
18、position B 2) MIL-L-7808J, Lubricating oil, aircraft turbine engine, synthetic base, NATO code number O-148 2) MIL-L-7870A, Lubricating oil, general purpose, low temperature 2) MIL-L-23699C, Lubricating oil, aircraft turbine engines, synthetic base 2) MS3197, Gage pin for socket contact engagement t
19、est 2) QQ-S-571F, Solder, electronic (96 to 485 C) 2) SAE AS 1241A, Fire Resistant Phosphate Ester Hydraulic Fluid for Aircraft (March 83) 3) TR 6058, Aerospace series Cable code identification list 4) 3 Definitions For the purposes of this standard, the definitions given in EN 3155-001 apply. 4 Req
20、uired characteristics 4.1 Specific characteristics Type D contacts are contacts with screening feature, class R corresponds to an operating temperature range from -65 C to 150 C. 4.2 Dimensions and mass See Figure 1 for dimensions. Contact mass: 0,7 g max. 4.3 Marking by colour code Not applicable 4
21、.4 Material, surface treatment 4.4.1 Material Body: copper alloy 4.4.2 Protective coating Gold on appropriate undercoat for copper alloy parts Thickness not specified. 2) Published by: Department of Defense (DOD), the Pentagon, Washington D.C. 20301 USA. 3) Published by: Society of Automotive Engine
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 3155-059-2006 航空航天系列.部件连接用电触点.第059部分R级、钎焊、D型、插座、尺寸16的同轴电触点.产品标准 3155 059 2006 航空航天 系列 部件 连接 用电
链接地址:https://www.31doc.com/p-3644461.html