BS EN 1848-2-2001 Part2 Determination of length, width,straightness and flatness.pdf
《BS EN 1848-2-2001 Part2 Determination of length, width,straightness and flatness.pdf》由会员分享,可在线阅读,更多相关《BS EN 1848-2-2001 Part2 Determination of length, width,straightness and flatness.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 1848-2:2001 Flexible sheets for waterproofing Determination of length, width, straightness and flatness Part 2: Plastic and rubber sheets for roof waterproofing The European Standard EN 1848-2:2001 has the status of a British Standard ICS 83.140.10; 91.100.50 NO COPYING WITHOU
2、T BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: Southeast University User, Southeast University, Fri Oct 28 08:32:25 BST 2005, Uncontrolled Copy, (c) BSI BS EN 1848-2:2001 This British Standard, having been prepared under the direction of the Sector Committee for Building and Ci
3、vil Engineering, was published under the authority of the Standards Committee and comes into effect on 15 July 2001 BSI 07-2001 ISBN 0 580 36353 8 National foreword This British Standard is the official English language version of EN 1848-2:2001. The UK participation in its preparation was entrusted
4、 by Technical Committee B/546, Flexible sheets for waterproofing, to Subcommittee B/546/2, Roof sheeting and sealing sheeting, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards
5、 which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “ International Standards Correspondence Index” , or by using the “ Find” facility of the BSI Standards Electronic Catalogue. A British Standard
6、 does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the respon
7、sible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN titl
8、e page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: Southeast University User, Southeast University, Fri Oct 28 08:32:25 BS
9、T 2005, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1848-2 May 2001 ICS 91.100.50 English version Flexible sheets for waterproofing Determination of length, width, straightness and flatness Part 2: Plastic and rubber sheets for roof waterproofing Feuilles souples
10、dtanchit Dtermination de la longueur, de la largeur, de la rectitude et de la planit Partie 2: Feuilles dtanchit de toiture plastiques et lastomres Abdichtungsbahnen Bestimmung der Lnge, Breite, Geradheit und Planlage Teil 2: Kunststoff- und Elastomerbahnen fr Dachabdichtungen This European Standard
11、 was approved by CEN on 2 June 2000. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such na
12、tional standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and no
13、tified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland a
14、nd United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1848
15、-2:2001 E Licensed Copy: Southeast University User, Southeast University, Fri Oct 28 08:32:25 BST 2005, Uncontrolled Copy, (c) BSI Page 2 EN 1848-2:2001 BSI 07-2001 Contents Page Foreword.3 Introduction3 1Scope3 2Normative references3 3Definitions4 4Sampling.4 5Determination of length 4 6Determinati
16、on of width5 7Determination of straightness and flatness .5 8Precision of the test methods6 9Test report6 Licensed Copy: Southeast University User, Southeast University, Fri Oct 28 08:32:25 BST 2005, Uncontrolled Copy, (c) BSI ? Page 3 EN 1848-2:2001 BSI 07-2001 Foreword This European Standard has b
17、een prepared by Technical Committee CEN/TC 254, Flexible sheets for waterproofing, the Secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2001, and confl
18、icting national standards shall be withdrawn at the latest by July 2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germa
19、ny, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Introduction This European Standard is intended for characterization of plastic and rubber sheets as manufactured or supplied before use. This test method relates exclus
20、ively to products or to their components where appropriate, and not to waterproofing membrane systems composed of such products and installed in the works. This test is intended to be used in conjunction with European Standard, Definition and Characteristics, for plastic and rubber sheets for roof w
21、aterproofing. 1Scope This European Standard specifies methods for the determination of length, width, straightness and flatness of plastic and rubber sheets for roof waterproofing supplied in rolls. 2Normative references This European Standard incorporates, by dated or undated references, provisions
22、 from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by ame
23、ndment or revision. For undated references, the latest editions of the publication referred to apply (including amendments). EN 13416,Flexible sheets for waterproofing Bitumen, plastic and rubber sheets for roof waterproofing Rules for sampling. Licensed Copy: Southeast University User, Southeast Un
24、iversity, Fri Oct 28 08:32:25 BST 2005, Uncontrolled Copy, (c) BSI ? Page 4 EN 1848-2:2001 BSI 07-2001 3Terms and definitions For the purposes of this European Standard, the following terms and definitions apply: 3.1 length dimension of the roll measured in the manufacturing direction 3.2 width dime
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 1848-2-2001 Part2 Determination of length width straightness and flatness 1848 2001 length width
链接地址:https://www.31doc.com/p-3644697.html