BS EN 13155-2003+A2-2009 起重机安全性.非固定式装载升降机.pdf
《BS EN 13155-2003+A2-2009 起重机安全性.非固定式装载升降机.pdf》由会员分享,可在线阅读,更多相关《BS EN 13155-2003+A2-2009 起重机安全性.非固定式装载升降机.pdf(72页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13155:2003 Cranes Safety Non-fixed load lifting attachments ICS 53.020.30 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - w EUROPEAN STANDARD
2、 NORME EUROPENNE EUROPISCHE NORM EN 13155:2003+A2 March 2009 ICS 53.020.30 Supersedes EN 13155:2003 English Version Cranes - Safety - Non-fixed load lifting attachments Appareils de levage charge suspendue - Scurit Equipements amovibles de prise de charge Krane - Sicherheit - Lose Lastaufnahmemittel
3、 This European Standard was approved by CEN on 17 November 2001 and includes Amendment 1 approved by CEN on 24 June 2005 and Amendment 2 approved by CEN on 17 February 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europ
4、ean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (Englis
5、h, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria,
6、Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATIO
7、N COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13155:2003+A2:2009: E EN 13155:2003+A2:2009 (E) 2 Contents Pa
8、ge Foreword 3 Introduction .4 1 Scope 4 2 Normative references 5 3 Terms and definitions .7 4 List of significant hazards . 12 5 Safety requirements and/or measures . 19 6 Verification of the safety requirements and/or measures 26 7 Information for use . 31 Annex A (normative) General verification m
9、ethods 37 Annex B (normative) Verification methods for plate clamps 42 Annex C (normative) Verification methods for vacuum lifters 46 Annex D (normative) Verification methods for lifting magnets 53 Annex E (normative) Verification methods for lifting beams 58 Annex F (normative) Verification methods
10、 for lifting forks . 60 Annex G (normative) Verification methods for clamps . 61 Annex H (informative) Selection of a suitable set of crane standards for a given application . 65 Annex ZA (informative) #Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/
11、EC amended by Directive 98/79/EC$ . 67 Annex ZB(informative) #Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC$ 68 Bibliography . 69 BS EN 13155:2003+A2:2009 EN 13155:2003+A2:2009 (E) 3 Foreword This document (EN 13155:2003+A2:2009) has been prepa
12、red by Technical Committee CEN/TC 147 “Cranes - Safety”, the secretariat of which is held by BSI. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be
13、 withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2005-06-24 and Amendment 2, approved by CEN on 2009-02-17. This document supersedes EN 13155:2003. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“ and
14、 # $. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). #For relationship with EC Directive(s), see informative Annexes ZA and ZB, which are integral parts of this d
15、ocument.$ For the relationship with other European standards for cranes, see informative Annex H. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czec
16、h Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 13155:2003+A2:2009 EN 13155:2003+A2:2009 (E
17、) 4 Introduction This European Standard has been prepared to be a harmonized standard to provide one means for non-fixed load lifting attachments used on cranes to conform with the essential health and safety requirements of the Machinery Directive, as amended. This European Standard is a type C sta
18、ndard as stated in EN 1070. The machinery concerned and the extent to which hazards are covered are indicated in the scope of this standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precede
19、nce over the provisions of the other standards, for non-fixed load lifting attachments which have been designed and built according to the provisions of this type C standard. 1 Scope This European Standard specifies safety requirements for the following non-fixed load lifting attachments for cranes,
20、 hoists and manually controlled load manipulating devices: plate clamps; vacuum lifters; self priming, non-self priming (pump, venturi, turbine); electric lifting magnets (battery fed and mains-fed); permanent lifting magnets; electro-permanent lifting magnets; lifting beams; C-hooks; lifting forks;
21、 clamps; defined in clause 3. This standard does not specify the additional requirements for: non fixed load lifting attachments in direct contact with foodstuffs or pharmaceuticals requiring a high level of cleanliness for hygiene reasons; hazards resulting from handling specific hazardous material
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13155-2003+A2-2009 起重机安全性.非固定式装载升降机 13155 2003 A2 2009 起重机 安全性 固定 装载 升降机
链接地址:https://www.31doc.com/p-3644935.html