BS EN 19-2002 通用工业阀门标记 Industrial valves. Marking of metallic valves.pdf
《BS EN 19-2002 通用工业阀门标记 Industrial valves. Marking of metallic valves.pdf》由会员分享,可在线阅读,更多相关《BS EN 19-2002 通用工业阀门标记 Industrial valves. Marking of metallic valves.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 19:2002 Industrial valves Marking of metallic valves The European Standard EN 19:2002 has the status of a British Standard ICS 23.060.01 BS EN 19:2002 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was p
2、ublished under the authority of the Standards Policy and Strategy Committee on 13 May 2002 BSI 13 May 2002 ISBN 0 580 39697 5 National foreword This British Standard is the official English language version of EN 19:2002. It supersedes BS EN 19:1992 which is withdrawn. The UK participation in its pr
3、eparation was entrusted by Technical Committee PSE/7, Industrial valves, to Subcommittee PSE/7/1, Industrial valves Basic standards, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Sta
4、ndards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Stand
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 19-2002 通用工业阀门标记 Industrial valves. Marking of metallic valves 19 2002 通用 工业 阀门 标记
链接地址:https://www.31doc.com/p-3644954.html