BS EN 50144-2-6-2001 手持电动工具的安全性.第2-6部分铁锤的特殊要求.pdf
《BS EN 50144-2-6-2001 手持电动工具的安全性.第2-6部分铁锤的特殊要求.pdf》由会员分享,可在线阅读,更多相关《BS EN 50144-2-6-2001 手持电动工具的安全性.第2-6部分铁锤的特殊要求.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 50144-2-6:2001 Incorporating Amendment No. 1 Safety of hand-held electric motor operated tools Part 2-6: Particular requirements for hammers The European Standard EN 50144-2-6:2000, with the incorporation of Amendment A1:2001, has the status of a British Standard ICS 25.140.20
2、 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue May 08 12:33:19 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 50144-2-6:2001 This British Standard, having been prepared under the direction of the
3、 Electrotechnical Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 March 2001 BSI 25 April 2002 ISBN 0 580 37201 4 National foreword This British Standard is the official English language version of EN 50144-2-6:2000 including amendment A1:20
4、01. It supersedes BS EN 50144-2-6:1997 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/6, Portable motor operated tools, which has the responsibility to: A list of o
5、rganizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “ International
6、 Standards Correspondence Index” , or by using the “ Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a Britis
7、h Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European devel
8、opments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 17 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Sidelining in this document indicate
9、s the most recent changes by amendment. Amendments issued since publication Amd. No. DateComments 1354025 April 2002Indicated by a sideline Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue May 08 12:33:19 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARDEN 501
10、44-2-6 NORME EUROPENNEDecember 2000 EUROPISCHE NORM+ A1 August 2001 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2000 CENELEC
11、 -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50144-2-6:2000 + A1:2001 E ICS 25.140.20; 25.120.10Supersedes EN 50144-2-6:1996 English version Safety of hand-held electric motor operated tools Part 2-6: Particular requirements for hammer
12、s (includes amendment A1:2001) Scurit des outils lectroportatifs moteur Partie 2-6: Rgles particulires pour les marteaux (inclut l?amendement A1:2001) Sicherheit handgefhrter motorbetriebener Elektrowerkzeuge Teil 2-6: Besondere Anforderungen an Hmmer (enthlt nderung A1:2001) This European Standard
13、was approved by CENELEC on 1998-10-01. Amendment A1 was approved by CENELEC on 2001-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-da
14、te lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under
15、 the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ir
16、eland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue May 08 12:33:19 GMT+00:00 2007, Uncontrolled Copy, (c) BSI Page 2 EN 50144-2-6:2000 BSI 25 April 2002 Foreword This Eu
17、ropean Standard has been prepared by the Technical Committee CENELEC TC 61F, Hand-held and transportable electric motor operated tools. The text of the draft was submitted to the Unique Acceptance Procedure (UAP) in December 1993 and was approved by CENELEC as EN 50144-2-6 on 1994-10-04. A draft for
18、 an amendment was submitted to UAP in April 1994 and was approved by CENELEC on 1994-10-04 for inclusion into the European Standard. A further amendment was submitted to UAP in May 1996 and was approved by CENELEC as amendment A1 to EN 50144-2-6 on 1996-12-09. Amendments to fulfil the essential requ
19、irements of the Machinery Directive were submitted to the formal vote in June 1998 and were approved by CENELEC on 1998-10-01 for inclusion, together with the earlier amendment, into a second edition of EN 50144-2-6. This European Standard supersedes EN 50144-2-6:1996. The following dates were fixed
20、: -latest date by which the EN has to be implemented at a national level by publication of an identical national standard or by endorsement(dop)2001-07-01 -latest date by which the national standards conflicting with the EN have to be withdrawn(dow)2001-12-01 This standard is divided into two parts:
21、 Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools). Part 2: Requirements for particular types of tool which either supplement or modify the requirements given in Part 1 to account for the parti
22、cular hazards and characteristics of these specific tools. This European Standard has been prepared under a mandate given to CEN/CENELEC by the European Commission and the European Free Trade Association and supports the essential health and safety requirements of the Machinery Directive. Compliance
23、 with the clauses of Part 1 together with this Part 2 provides one means of conforming with the essential health and safety requirements of the Directive. For noise and vibration this standard covers the requirements for their measurement, the provision of information arising from these measurements
24、 and the provision of information about the personal protective equipment required. Specific requirements for the reduction of the risk arising from noise and vibration through the design of the tool are not given as this reflects the current state of the art. As with any standard, technical progres
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 50144-2-6-2001 手持电动工具的安全性.第2-6部分铁锤的特殊要求 50144 2001 手持 电动工具 安全性 部分 铁锤 特殊要求
链接地址:https://www.31doc.com/p-3645052.html