AS 2505-4-2002 Metallic materials Method 4 Wire—Reverse bend test.pdf
《AS 2505-4-2002 Metallic materials Method 4 Wire—Reverse bend test.pdf》由会员分享,可在线阅读,更多相关《AS 2505-4-2002 Metallic materials Method 4 Wire—Reverse bend test.pdf(9页珍藏版)》请在三一文库上搜索。
1、AS 2505.42002 ISO 7801:1984 i Australian Standard TM Metallic materials Method 4: WireReverse bend test PREFACE This Standard was prepared by Standards Australia Committee MT-006, Mechanical Testing of Metals to supersede in part AS 2505.41981, Methods for bend and related testing of metals, Method
2、4: Wire. This Standard is identical with and has been reproduced from ISO 7801:1984, Metallic materialsWireReverse bend test. This Standard is Method 4 of a series of Standards on the methods of bending wire and related testing of metals. The series comprises the following Methods: AS 2505Metallic m
3、aterials 2505.1Method 1:Sheet, strip and plate 2505.2Method 2:Bars, rods and solid shapes 2505.3Method 3:Tubular products 2505.4Method 4:WireReverse bend test 2505.5Method 5:WireSimple torsion test 2505.6Method 6:WireWrapping test As this Standard is reproduced from an International Standard, the fo
4、llowing applies: (a) Its number does not appear on each page of text and its identity is shown only on the cover and title page. (b) In the source text, this International Standard should read this Australian Standard. (c) A full point substitutes for a comma when referring to a decimal marker. AS 2
5、505.4 Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 ii NOTES Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 1 .au Standards Australia Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 2 .au Standards Australia Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 3 .au
6、 Standards Australia Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 4 .au Standards Australia Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 NOTES 5 Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 6 This Australian Standard was prepared by Committee MT-006, Mechanical Te
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- AS 2505-4-2002 Metallic materials Method WireReverse bend test 2505 2002 Wire Reverse
链接地址:https://www.31doc.com/p-3645725.html