BS EN 10055-1996 Hot rolled steel equal flange tees with radiused root and toes. Dimensions and tolerances on shape and dimensions1.pdf
《BS EN 10055-1996 Hot rolled steel equal flange tees with radiused root and toes. Dimensions and tolerances on shape and dimensions1.pdf》由会员分享,可在线阅读,更多相关《BS EN 10055-1996 Hot rolled steel equal flange tees with radiused root and toes. Dimensions and tolerances on shape and dimensions1.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10055:1996 Hot rolled steel equal flange tees with radiused root and toes Dimensions and tolerances on shape and dimensions The European Standard EN 10055:1995 has the status of a British Standard ICS 77.140.70 BS EN 10055:1996 This British Standard, having been prepared under
2、 the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 July 1996 BSI 06-1999 The following BSI references relate to the work on this standard: Committee reference ISE/13 Draft for comment92/44027 DC ISBN 0 580 25801 7 Comm
3、ittees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee ISE/13, Structural steel, upon which the following bodies were represented: British Constructional Steelwork Association Ltd. British Iron and Steel Producers Association Health
4、 and Safety Executive Amendments issued since publication Amd. No.DateComments BS EN 10055:1996 BSI 06-1999i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 100553 BS EN 10055:1996 ii BSI 06-1999 National foreword This British Standard has been prepare
5、d by Technical Committee ISE/13 and is the English language version of EN 10055:1995 Hot rolled steel equal flange tees with radiused root and toes Dimensions and tolerances on shape and dimensions published by the European Committee for Standardization (CEN). A British Standard does not purport to
6、include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred toCorresponding British Standard EN 10025:
7、1993BS EN 10025:1993 Hot rolled products of non-alloy structural steels. Technical delivery conditions EN 10079:1992BS EN 10079:1993 Definition of steel products Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 1 to 6 and a back
8、cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10055 November 1995 ICS 77.140.70 Descriptors: Iron and steel products, h
9、ot rolled products, T bars, steels, designation, dimensions, dimensional tolerances, form tolerances English version Hot rolled steel equal flange tees with radiused root and toes Dimensions and tolerances on shape and dimensions Fers T en acier ailes gales et coins arrondis en acier lamins chaud Di
10、mensions et tolrances sur la forme et les dimensions Warmgewalzter gleichschenkliger T-Stahl mit gerundeten Kanten und bergngen Mae, Grenzabmae und Formtoleranzen This European Standard was approved by CEN on 1995-06-30. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
11、 stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Stand
12、ard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national stand
13、ards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Cent
14、ral Secretariat: rue de Stassart 36, B-1050 Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members. Ref. No. EN 10055:1995 E EN 10055:1995 BSI 06-1999 2 Foreword This European Standard has been prepared by Technical Co
15、mmittee ECISS/TC11, Structural steel sections, of which the Secretariat is held by BSI. The discussions within ECISS/TC11 were based on Euronorm 55. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by
16、 May 1996, and conflicting national standards shall be withdrawn at the latest by May 1996. According to the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
17、Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom. Contents Page Foreword2 1Scope3 2Normative references3 3Definitions3 4Designation3 5Dimensions3 6Tolerances on dimensions and shape3 7Tolerance on mass3 8Tolerance on length3 Figure 1 Hot rolled steel equal flange
18、 tees with radiused root and toes5 Table 1 Designation and dimensions of hot rolled steel equal flange tees with radiused root and toes4 Table 2 Tolerances on dimensions and shape of hot rolled steel equal flange tees with radiused root and toes5 EN 10055:1995 BSI 06-19993 1 Scope This European Stan
19、dard specifies requirements for the nominal dimensions and the tolerances on dimensions, shape and mass of hot-rolled steel equal flange tees with radiused root and toes. These requirements do not apply to equal flange tees produced from stainless steel. 2 Normative references This European Standard
20、 incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to thi
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10055-1996 Hot rolled steel equal flange tees with radiused root and toes. Dimensions tolerances 10055
链接地址:https://www.31doc.com/p-3645794.html