BS EN 10216-2-2002 压力用途用无缝钢管 交货技术条件 第2部分:具有高温的非合金和合金钢管.pdf
《BS EN 10216-2-2002 压力用途用无缝钢管 交货技术条件 第2部分:具有高温的非合金和合金钢管.pdf》由会员分享,可在线阅读,更多相关《BS EN 10216-2-2002 压力用途用无缝钢管 交货技术条件 第2部分:具有高温的非合金和合金钢管.pdf(44页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10216-2:2002 Incorporating Amendment No. 1 Seamless steel tubes for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties The European Standard EN 10216-2:2002, with the incorporation of amendment
2、 A1:2004 has the status of a British Standard ICS 23.040.10; 77.140.75 ? 压力载荷用无缝钢管交货技术条件 第2部分:具有高温的非合金和合金钢管 BS EN 10216-2:2002 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards P
3、olicy and Strategy Committee on 26 June 2002 BSI 10 May 2004 ISBN 0 580 39838 2 National foreword This British Standard is the official English language version of EN 10216-2:2002, including amendment A1:2004. Together with BS EN 10217-2:2002 it replaces BS 3059-2, BS 3602-1, BS 3604-1 and BS 3606:1
4、992 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee ISE/73, Steels for pressure purposes, to Subcommittee ISE/73/1, Steel tubes for pressure purposes, which has the responsibility to: A list of organizations represented on this subcommittee can be obt
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10216-2-2002 压力用途用无缝钢管 交货技术条件 第2部分:具有高温的非合金和合金钢管 10216 2002 压力 用途 无缝钢管 交货 技术 条件 部分 具有 高温 合金 钢管
链接地址:https://www.31doc.com/p-3645822.html