BS 5499-6-2002 图形符号和标志.包括防火安全标志的安全标志.用于安全标志的图形符号的形成和设计.要求.pdf

《BS 5499-6-2002 图形符号和标志.包括防火安全标志的安全标志.用于安全标志的图形符号的形成和设计.要求.pdf》由会员分享，可在线阅读，更多相关《BS 5499-6-2002 图形符号和标志.包括防火安全标志的安全标志.用于安全标志的图形符号的形成和设计.要求.pdf（34页珍藏版）》请在三一文库上搜索。

1、BRITISH STANDARD BS 5499-6:2002 Graphical symbols and signs Safety signs, including fire safety signs Part 6: Creation and design of graphical symbols for use in safety signs Requirements ICS 01.080.99; 13.220.99 BS 5499-6:2002 This British Standard, having been prepared under the direction of the H

2、ealth and Environment Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 26 November 2002 BSI 26 November 2002 The following BSI references relate to the work on this British Standard: Committee reference PH/8/1 Draft for comment

3、 02/586206 DC ISBN 0 580 40695 4 Committees responsible for this British Standard The preparation of this British Standard was entrusted by Technical Committee PH/8, Graphical symbols and signs, to Subcommittee PH/8/1, Safety signs (including fire safety signs), upon which the following bodies were

4、represented: Association of British Theatre Technicians BRE/LPC Laboratories British Fire Consortium British Sign and Graphics Association Cinema Exhibitors Association Consumer Policy Committee of BSI Electricity Association Guild of Architectural Ironmongers Health and Safety Sign Association Home

5、 Office Institute of Fire Safety Lighting Industry Federation Limited London Fire and Emergency Planning Authority Manchester Metropolitan University, Department of Psychology and Speech Pathology Ministry of Defence UK Defence Standardization National Illumination Committee of Great Britain Photolu

6、minescent Safety Products Association Railtrack Royal Institute of British Architects Royal Life Saving Society UK Royal Society for the Prevention of Accidents Sign Design Society Limited South Yorkshire Fire Prevention Association and Fire Liaison Panel Theatres Advisory Council Coopted members Th

7、e following body was also represented in the drafting of the standard through a panel: Health and Safety Executive Amendments issued since publication DateAmd. No.Comments BS 5499-6:2002 BSI 26 November 2002 i Contents Page Committees responsibleInside front cover Forewordii 1Scope1 2Normative refer

8、ences1 3Terms and definitions2 4Creation procedure3 5Types of signs4 6Assignment of meaning, function and image content to the safety sign6 7Design of the graphical symbol6 8Layout of templates11 Annex A (informative) Checklist for designers16 Annex B (informative) Colour and file format17 Annex C (

9、informative) Additional design guidelines18 Annex D (informative) Representation of the human figure21 Annex E (informative) Representation of water in water safety signs24 Bibliography28 Index29 Figure 1 Example of assignment of meaning, function and image content to a safety sign6 Figure 2 Example

10、 of the use of line thickness and line spacing in a graphical symbol7 Figure 3 Example of critical detail8 Figure 4 Example of a combination of graphical symbols to form a new graphical symbol9 Figure 5 Examples of the use of a determinant10 Figure 6 Prohibition sign template11 Figure 7 Mandatory si

11、gn template12 Figure 8 Hazard sign template13 Figure 9 Safe condition sign and fire equipment sign templates14 Figure 10 Examples of safety signs incorporating graphical symbols created in accordance with Clause 7 and Clause 815 Figure C.1 Example of filled area18 Figure C.2 Example of a symmetrical

12、 graphical symbol19 Figure C.3 Example of arrow with Belgian head20 Figure D.1 Anterior and posterior view of human figure21 Figure D.2 Lateral views of human figure21 Figure D.3 Example of an outline figure22 Figure D.4 Example of dynamic depiction of a hazard23 Figure E.1 Examples of water safety

13、signs involving activities on the water surface or above it25 Figure E.2 Example of water safety sign involving an activity beneath the water surface26 Figure E.3 Examples of water safety signs involving varying depths of water (and not activities)27 Table 1 Geometric shapes, safety colours and cont

14、rast colours of templates for safety signs5 Table B.1 Recommended colour reference systems and colour values for use in the design of safety sign originals17 BS 5499-6:2002 ii BSI 26 November 2002 Foreword This part of BS 5499 has been prepared by Subcommittee PH/8/1. BS 5499 covers safety signs and

15、 fire safety signs since it is considered essential that all safety signs follow the same basic vocabulary of safety colours and geometric shapes. BS 5499 comprises the following parts: Part 1: Specification for geometric shapes, colours and layout; Part 2: Specification for self-luminous fire safet

16、y signs; Part 3: Specification for internally illuminated fire safety signs; Part 4: Code of practice for escape route signing; Part 5: Signs with specific safety meanings; Part 6: Creation and design of graphical symbols for use in safety signs Requirements; Part 11: Water safety signs. This part o

17、f BS 5499 specifies requirements for the creation and design of graphical symbols for use in safety signs. It is intended for use in conjunction with BS 5499-1. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.

18、 Compliance with a British Standard does not in itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 29 and a back cover. The BSI copyright notice displayed in this document indicates when the documen

19、t was last issued. BS 5499-6:2002 BSI 26 November 2002 1 Introduction A graphical symbol is defined as a visually perceptible figure used to transmit information independently of language. Graphical symbols are used in safety signs for a wide range of purposes. For such graphical symbols, consistenc

20、y in the design of graphical symbols for use in a particular situation or in similar situations is important, as is comprehensibility. Thus, there is a need to standardize the principles for creating graphical symbols for safety signs to ensure visual clarity, to maintain consistency and thereby to

21、improve recognition. 1 Scope This part of BS 5499 specifies requirements for the creation and design of graphical symbols for use in safety signs, including fire safety signs. It specifies requirements for the design of graphical symbols suitable for use in safety signs for submission for registrati

22、on as approved safety signs, including line thickness, the use of determinants and how to indicate negation. It also specifies a series of templates to be used in the design of graphical symbols for different types of safety signs. This part of BS 5499 is not applicable to graphical symbols for use:

23、 on drawings and diagrams; in technical documentation for products; as public information symbols not intended to convey any safety message; on road traffic signs. Examples are given for illustrative purposes only and do not constitute requirements for particular safety signs. NOTE 1Existing safety

24、signs, including fire safety signs, are specified in BS 5499-5 and existing water safety signs are specified in BS 5499-11. NOTE 2The illustrations in this standard are as accurate as possible within the limitations of the printing process. BSI does not claim that the colours used correspond to any

25、proprietary colour system. NOTE 3A checklist for designers is given in Annex A, and recommendations on colour and file format are given in Annex B. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition

26、 cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. BS 5499-1:2002, Graphical symbols and signs Safety signs, including fire safety signs Part 1: Specification for geometric shapes, colours and layout. BS 5499-5, Graphical symbols

27、 and signs Safety signs, including fire safety signs Part 5: Signs with specific safety meanings. BS 5499-11, Graphical symbols and signs Safety signs, including fire safety signs Part 11: Water safety signs. BS 8501, Graphical symbols and signs Public information symbols. PD 6578, Guide to British,

28、 European and International graphical symbols, for use on equipment, for safety and fire safety, and for public information in relation to ISO 7000 and IEC 60417. BS ISO 9186, Graphical symbols Test methods for judged comprehensibility and comprehension. BS 5499-6:2002 2 BSI 26 November 2002 3 Terms

29、 and definitions For the purposes of this part of BS 5499 the following terms and definitions apply. 3.1 safety sign sign that gives a general safety message, by means of a combination of a safety colour and a geometric shape and which, by the addition of a graphical symbol, gives a particular safet

30、y meaning 3.2 types of safety sign 3.2.1 prohibition sign safety sign that indicates that specific behaviour is forbidden 3.2.2 mandatory sign safety sign that indicates that a specific course of action is to be taken 3.2.3 hazard sign safety sign that indicates a specific source of potential harm 3

31、.2.4 safe condition sign safety sign that indicates a safety action, the location of safety equipment or a safety facility, or an escape route 3.2.5 fire equipment sign safety sign that indicates the location or identification of fire equipment or how it should be used 3.2.6 water safety sign safety

32、 sign for use on, in or near water 3.3 safety colour specific colour to which a safety meaning is attributed 3.4 contrast colour colour that contrasts with the safety colour in order to make the safety colour more conspicuous 3.5 graphical symbol visually perceptible figure with a particular meaning

33、 used to transmit information independently of language 3.6 graphical symbol element part of a graphical symbol with a particular meaning 3.7 determinant graphical symbol used as a common element within a series of graphical symbols NOTEFor example, the fire determinant when used with the graphical

34、symbol for a telephone conveys the meaning “fire telephone”; the fire determinant when used with the graphical symbol for a hose reel conveys the meaning “fire hose reel”; the first aid determinant when used with the graphical symbol for a shower conveys the meaning “first aid shower”. 3.8 critical

35、detail element of a graphical symbol without which the graphical symbol cannot be understood BS 5499-6:2002 BSI 26 November 2002 3 3.9 exclusion band area of a safety sign in which there is no part of the graphical symbol, to ensure the clarity of the graphical symbol within the safety sign 3.10 fun

36、ction written description of the purpose of the information to be conveyed by a graphical symbol 3.11 image content written description of the elements of the graphical symbol NOTEThe image content can also include a description of the relevant disposition of the elements of the graphical symbol. 3.

37、12 meaning safety message that a safety sign is intended to convey 3.13 sign height diameter of a circular geometric shape or the height of a rectangular or triangular geometric shape NOTEAny border is ignored. 3.14 safety sign original finished version of a safety sign in terms of shape, colour, la

38、yout and graphical symbol, used for reference, standardization or reproduction purposes 3.15 template basic pattern for the design of a graphical symbol for use in a safety sign 4 Creation procedure 4.1 Before design of a new graphical symbol for use in a safety sign is undertaken the following proc

39、edure shall be carried out: a) identification of the required meaning of the safety sign; b) identification of the need for a new safety sign by determination of whether a safety sign with the required meaning already exists. This shall be determined in accordance with BS 5499-1:2002, Clause 8, as f

40、ollows: 1) determination of whether a safety sign incorporating a graphical symbol conveying the required meaning is specified in BS 5499-5 or in BS 5499-11; 2) if a safety sign incorporating a graphical symbol conveying the required meaning is not specified in BS 5499-5 or in BS 5499-11, determinat

41、ion of whether a graphical symbol conveying the required meaning is specified in BS 8501 or PD 6578; c) identification of the type of safety sign, in accordance with Clause 5; d) assignment of a meaning and a function to the safety sign in accordance with Clause 6. BS 5499-6:2002 4 BSI 26 November 2

42、002 4.2 During the design of a new graphical symbol for use in a safety sign the following procedure shall be carried out: a) consideration of existing graphical symbols with similar meanings which might be adapted or combined to form the graphical symbol for the new safety sign; NOTE 1An analysis s

43、hould also be carried out of the expected characteristics of the target audience of the new safety sign and the context in which it is expected to be used. (Factors to be considered are given in Annex A.) b) design of the new graphical symbol in accordance with Clause 7 using the relevant template s

44、pecified in Clause 8. 4.3 After design of the new graphical symbol, an evaluation shall be carried out of the comprehensibility of the safety sign original in the context in which it is to be used, in accordance with BS ISO 9186. The safety sign original shall then be modified if necessary. NOTEThe

45、safety sign original may be submitted to BSI Technical Committee PH/8 for registration1). 5 Types of signs Each graphical symbol shall be designed for use in one of the following five types of safety sign as specified in BS 5499-1, and shown in Table 1: a) a prohibition sign; b) a mandatory sign; c)

46、 a hazard sign; d) a safe condition sign; e) a fire equipment sign. 1)Details of the registration procedure and an application form, which gives details of required file formats, can be obtained from The Secretary, Technical Committee PH/8, BSI, 389 Chiswick High Road, London W4 4AL. BS 5499-6:2002

47、BSI 26 November 2002 5 Table 1 Geometric shapes, safety colours and contrast colours of templates for safety signs Geometric shapeMeaningSafety colour Contrast colour Graphical symbol colour Examples of use A circleProhibitionRedWhiteBlackNo smoking No unauthorized vehicles Do not drink A circleMand

48、atory action BlueWhiteWhiteWear safety helmet Keep clear An equilateral triangle with radiused outer corners HazardYellowBlackBlackHot surface Acid High voltage A squareSafe condition Escape route Safety equipment GreenWhiteWhiteFirst aid room Fire exit Evacuation assembly point A squareFire equipme

49、ntRedWhiteWhiteFire point Fire alarm Wet riser Fire extinguisher BS 5499-6:2002 6 BSI 26 November 2002 6 Assignment of meaning, function and image content to the safety sign Each safety sign shall be used to convey only one safety message in accordance with BS 5499-1:2002, 11.3. The new safety sign shall be assigned a meaning and a function. Once the safety sign original is complete the image content shall be identified, including the critical details (see Figure 1).