BS EN 12385-2-2002+A1-2008 钢丝绳.安全性.定义、名称和分类.pdf
《BS EN 12385-2-2002+A1-2008 钢丝绳.安全性.定义、名称和分类.pdf》由会员分享,可在线阅读,更多相关《BS EN 12385-2-2002+A1-2008 钢丝绳.安全性.定义、名称和分类.pdf(56页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12385-2:2002 +A1:2008 Steel wire ropes Safety Part 2: Definitions, designation and classification ICS 01.040.77; 77.140.65 BS EN 12385-2:2002+A1:2008 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 24 July 2003 BSI 2008
2、 ISBN 978 0 580 60251 1 National foreword This British Standard is the UK implementation of EN 12385-2:2002+A1:2008. It supersedes BS EN 12385-2:2002 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN t
3、ext carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by . The UK participation in its preparation was entrusted to Technical Committee MHE/2, Wire ropes. A list of organizations represented on this committee can be obtained on request to its secretary
4、. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication DateComments 30 June 2008Impl
5、ementation of CEN amendment A1:2008 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12385-2:2002+A1 March 2008 ICS 77.140.65 Supersedes EN 12385-2:2002 English Version Steel wire ropes - Safety - Part 2: Definitions, designation and classification Cbles en acier - Scurit - Partie 2: Dfinitions,
6、 dsignation et classification Stahldrahtseile - Sicherheit - Teil 2: Begriffe, Bezeichnungen und Klassifizierung This European Standard was approved by CEN on 10 October 2002 and includes Amendment 1 approved by CEN on 14 February 2008. CEN members are bound to comply with the CEN/CENELEC Internal R
7、egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. T
8、his European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members ar
9、e the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switze
10、rland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROP EN DE NORM ALISATION EUROPISCHES KOM ITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref.
11、No. EN 12385-2:2002+A1:2008: E EN 12385-2:2002+A1:2008 (E) 2 Contents page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .4 4 Rope designation.28 5 Classification36 Annex A (informative) Elements of a rope41 Annex B (informative) More examples of the designation system 42 Annex
12、 C (informative) Index for definitions (in alphabetical order).48 Annex ZA (informative)Relationship between this European Standard and the Essential Requirements of EU Directive 98/37 51 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directiv
13、e 2006/42/EC 52 Bibliography 53 BS EN 12385-2:2002+A1:2008 ! ! EN 12385-2:2002+A1:2008 (E) 3 Foreword This document (EN 12385-2:2002+A1:2008) has been prepared by Technical Committee CEN/TC 168, “Chains, ropes, webbing, slings and accessories - Safety“, the secretariat of which is held by BSI. This
14、European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2008, and conflicting national standards shall be withdrawn at the latest by September 2008. This document includes Amendment 1, approved by CE
15、N on 2008-02-14. This document supersedes EN 12385-2:2002. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and suppor
16、ts essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document. The other parts of this European Standard are: Part 1: General requirements Part 3: Information for use and maintenance Part 4: Stranded
17、ropes for general lifting applications Part 5: Stranded ropes for lifts Part 6: Stranded ropes for mine shafts Part 7: Locked coil ropes for mine shafts Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons Part 9: Locked coil carrying ropes for cab
18、leway installations designed to carry persons Part 10: Spiral ropes for general structural applications Part 1 provides the general requirements of Parts 4 to 10. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement
19、 this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and
20、United Kingdom. BS EN 12385-2:2002+A1:2008 EN 12385-2:2002+A1:2008 (E) 4 Introduction This part of this European Standard has been prepared to support Parts 4 to 10 that concern themselves with the particular requirements for steel wire ropes for use in specific applications. The rope designation sy
21、stem described in clause 4 is provided with the intention of it being used to describe the rope in the certificate or inspection document referred to in the other Parts. The rope classification system described in clause 5 is provided to define which constructions apply to a specific rope class. The
22、 designation and classification systems described in clauses 4 and 5 respectively may also be used for ropes not covered by the other parts of this standard. 1 Scope This part of this European Standard defines terms, specifies designations and classifies steel wire ropes and is for use in conjunctio
23、n with all other parts of this standard. It applies to ropes that have been manufactured after the date of issue of the standard. 2 Normative references Not applicable. 3 Terms and definitions For the purposes of this part of EN 12385, the following terms and definitions apply. 3.1 Wires 3.1.1 outer
24、 wires all wires positioned in the outer layer of a spiral rope or in the outer layer of wires in the outer strands of a stranded rope 3.1.2 inner wires all wires of intermediate layers positioned between the centre wire and outer layer of wires in a spiral rope or all other wires except centre, fil
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 12385-2-2002+A1-2008 钢丝绳.安全性.定义、名称和分类 12385 2002 A1 2008 钢丝绳 安全性 定义 名称 分类
链接地址:https://www.31doc.com/p-3646320.html