BS EN 10028-3-2003 压力用途用钢板第3部分 经过正火处理的可焊细晶粒钢.pdf
《BS EN 10028-3-2003 压力用途用钢板第3部分 经过正火处理的可焊细晶粒钢.pdf》由会员分享,可在线阅读,更多相关《BS EN 10028-3-2003 压力用途用钢板第3部分 经过正火处理的可焊细晶粒钢.pdf(18页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10028-3:2003 Flat products made of steels for pressure purposes Part 3: Weldable fine grain steels, normalized The European Standard EN 10028-3:2003 has the status of a British Standard ICS 77.140.30; 77.140.50 BS EN 10028-3:2003 This British Standard, was published under the
2、authority of the Standards Policy and Strategy Committee on 24 June 2003 BSI 24 June 2003 ISBN 0 580 42144 9 National foreword This British Standard is the official English language version of EN 10028-3:2003. It supersedes BS EN 10028-3:1993 which is withdrawn. The UK participation in its preparati
3、on was entrusted to Technical Committee ISE/73/2, Steel plates and bars for pressure purposes, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or E
4、uropean publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to includ
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10028-3-2003 压力用途用钢板第3部分 经过正火处理的可焊细晶粒钢 10028 2003 压力 用途 钢板 部分 经过 正火 处理 可焊细 晶粒
链接地址:https://www.31doc.com/p-3646379.html