BS EN 10216-3-2002 压力用途用无缝钢管ā—交货技术条件 第3部分:细晶粒合金钢管.pdf
《BS EN 10216-3-2002 压力用途用无缝钢管ā—交货技术条件 第3部分:细晶粒合金钢管.pdf》由会员分享,可在线阅读,更多相关《BS EN 10216-3-2002 压力用途用无缝钢管ā—交货技术条件 第3部分:细晶粒合金钢管.pdf(38页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10216-3:2002 Incorporating Amendment No. 1 Seamless steel tubes for pressure purposes Technical delivery conditions Part 3: Alloy fine grain steel tubes The European Standard EN 10216-3:2002, with the incorporation of amendment A1:2004 has the status of a British Standard ICS
2、23.040.10; 77.140.75 ? 压力载荷用无缝钢管交货技术条件 第 3 部分:细晶粒合金钢管 BS EN 10216-3:2002 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 26 June 2002 BSI 6 May
3、 2004 ISBN 0 580 39839 0 National foreword This British Standard is the official English language version of EN 10216-3:2002, including amendment A1:2004. The UK participation in its preparation was entrusted by Technical Committee ISE/73, Steels for pressure purposes, to Subcommittee ISE/73/1, Stee
4、l tubes for pressure purposes, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be foun
5、d in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are respo
6、nsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep t
7、he UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 34, an inside back cover and a back cover. The BSI copyright notice displayed
8、in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 15152 6 May 2004 Revision of Clause 9 and Annex ZA EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10216-3 May 2002 + A1 March 2004 ICS 23.040.10; 77.140.75 English version Se
9、amless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (includes amendment A1:2004) Tubes sans soudure en acier pour service sous pression - Conditions techniques de livraison - Partie 3: Tubes en acier alli grain fin (inclut lamendement A1:20
10、04) Nahtlose Stahlrohre fr Druckbeanspruchungen - Technische Lieferbedingungen - Teil 3: Rohre aus legierten Feinkornbausthlen (enthlt nderung A1:2004) This European Standard was approved by CEN on 25 April 2002; amendment A1 was approved by CEN on 2 January 2004. CEN members are bound to comply wit
11、h the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre
12、 or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official vers
13、ions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switz
14、erland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No
15、. EN 10216-3:2002 + A1:2004 E EN 10216-3:2002 (E) 2 Contents Foreword .3 1 SCOPE 4 2 NORMATIVE REFERENCES .4 3 TERMS AND DEFINITIONS .5 4 SYMBOLS.6 5 CLASSIFICATION AND DESIGNATION6 5.1 Classification .6 5.2 Designation 6 6 INFORMATION TO BE SUPPLIED BY THE PURCHASER7 6.1 Mandatory information7 6.2
16、Options .7 6.3 Examples of an order8 7 MANUFACTURING PROCESS8 7.1 Steelmaking process.8 7.2 Deoxidation process .8 7.3 Tube manufacture and delivery conditions8 8 REQUIREMENTS9 8.1 General .9 8.2 Chemical composition 9 8.3 Mechanical properties.10 8.4 Appearance and internal soundness.17 8.5 Straigh
17、tness.17 8.6 Preparation of ends.17 8.7 Dimensions, masses and tolerances.18 9 INSPECTION.22 9.1 Types of inspection.22 9.2 Inspection documents.23 9.3 Summary of inspection and testing.23 10 SAMPLING25 10.1 Frequency of tests.25 10.2 Preparation of samples and test pieces26 11 TEST METHODS.27 11.1
18、Chemical analysis27 11.2 Tensile test.27 11.3 Flattening test28 11.4 Ring tensile test.28 11.5 Drift expanding test.28 11.6 Ring expanding test 29 11.7 Impact test29 11.8 Leak tightness test29 11.9 Dimensional inspection 30 11.10 Visual examination30 11.11 Non-destructive testing 30 11.12 Material i
19、dentification31 11.13 Retests , sorting and reprocessing .31 12 MARKING31 12.1 Marking to be applied31 12.2 Additional marking31 13 PROTECTION.31 Annex A (normative).32 Annex ZA (informative)33 Bibliography34 EN 10216-3:2002 (E) 3 Foreword This document (EN 10216-3:2002) has been prepared by Technic
20、al Committee ECISS/TC 29, “Steel tubes and fittings for steel tubes“, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2002, and conflicting nation
21、al standards shall be withdrawn at the latest by November 2002. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informat
22、ive annex ZA, which is an integral part of this document. Other Parts of EN 10216 are: Part 1 : Non-alloy steel tubes with specified room temperature properties Part 2 : Non-alloy and alloy steel tubes with specified elevated temperature properties Part 4 : Non-alloy and alloy steel tubes with speci
23、fied low temperature properties Part 5 : Stainless steel tubes Another European Standard series covering tubes for pressure purposes is: EN 10217: Welded steel tubes for pressure purposes According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countri
24、es are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A1 This document (EN 1021
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10216-3-2002 压力用途用无缝钢管交货技术条件 第3部分:细晶粒合金钢管 10216 2002 压力 用途 无缝钢管 交货 技术 条件 部分 晶粒 合金 钢管
链接地址:https://www.31doc.com/p-3646436.html