BS EN 10263-1-2001 冷加工和冷挤压的钢棒,棍和线.一般交货技术条件.pdf
《BS EN 10263-1-2001 冷加工和冷挤压的钢棒,棍和线.一般交货技术条件.pdf》由会员分享,可在线阅读,更多相关《BS EN 10263-1-2001 冷加工和冷挤压的钢棒,棍和线.一般交货技术条件.pdf(30页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10263-1:2001 Incorporating Corrigenda Nos. 1 and 2 Steel rod, bars and wire for cold heading and cold extrusion Part 1: General technical delivery conditions The European Standard EN 10263-1:2001 has the status of a British Standard ICS 77.140.60; 77.140.65 BS EN 10263-1:2001
2、This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 August 2001 BSI 16 December 2002 ISBN 0 580 37620 6 National foreword This British Standard is the official En
3、glish language version of EN 10263-1:2001, including Corrigendum August 2002. Together with BS EN 10263-2:2001, BS EN 10263-3:2001 and BS EN 10263-4:2001 it supersedes BS 3111-1:1987, which is withdrawn; and together with BS EN 10263-5:2001 it supersedes BS 3111-2:1979, which is withdrawn. The UK pa
4、rticipation in its preparation was entrusted to Technical Committee ISE/71, Steel rods for wire drawing, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement internat
5、ional or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport
6、 to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries o
7、n the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 27 and a back cover.
8、The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 13449 Corrigendum No. 1 13 September 2001 Addition of supersession details 14066 Corrigendum No. 2 16 December 2002Changes to 5.3, Table A.1, B.4 a
9、nd Annex D EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10263-1 June 2001 ICS 77.140.60; 77.140.65 Incorporating corrigendum August 2002 English version Steel rod, bars and wire for cold heading and cold extrusion Part 1: General technical delivery conditions Barres, fil machine et fils en a
10、cier pour dformation froid et extrusion froid Partie 1: Conditions techniques gnrales de livraison Walzdraht, Stbe und Draht aus Kaltstauch- und Kaltfliepresthlen Teil 1: Allgemeine technische Lieferbedingungen This European Standard was approved by CEN on 19 April 2001. CEN members are bound to com
11、ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management
12、 Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the offici
13、al versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT E
14、UROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10263-1:2001 E Page 2 EN 10263-1:2001 BSI 16 December 2002 Contents P
15、age Foreword 4 1Scope . 5 2Normative references 5 3Terms and definitions. 6 4Classification and designation. 6 4.1Classification. 6 4.2Designation. 6 5Information to be supplied by the purchaser 7 5.1Mandatory information 7 5.2Non-mandatory information. 7 5.3Example of an order 7 6Production process
16、. 7 7Requirements 7 7.1General. 7 7.2Quality management system. 8 7.3Method of delivery. 8 7.4Delivery condition 8 7.5Chemical composition. 8 7.6Mechanical properties. 9 7.7Hardenability requirements . 9 7.8Microstructure. 9 7.9Internal soundness 10 7.10Surface quality 10 7.11Decarburization. 11 7.1
17、2Corrosion resistance of stainless steels 12 8Dimensions and tolerances on dimensions and shape 12 9Testing . 12 9.1Types and contents of inspection documents 12 9.2Extension of inspection . 12 9.3Specific inspection and testing 13 10Test methods 14 10.1Mechanical tests . 14 10.2Verification of hard
18、enability. 15 10.3Upsetting test 15 10.4Determination of the depth of decarburization. 15 10.5Retests, sorting and reprocessing. 16 11Marking. 16 12Packaging. 16 13Protection . 16 14Complaints after delivery. 17 15Options . 17 Annex A (informative) List of the national standards corresponding to the
19、 EURONORMS referred to 21 Annex B (normative) Supplementary or special requirements 22 Page 3 EN 10263-1:2001 BSI 16 December 2002 Annex C (normative) Determining the non-metallic inclusion content. 25 Annex D (informative) Dimensional standards applicable to products complying with this European St
20、andard. 27 Page 4 EN 10263-1:2001 BSI 16 December 2002 Foreword This European Standard has been prepared by Technical Committee ECISS/TC 15, Wire-rod - Qualities, dimensions, tolerances and specific tests, the Secretariat of which is held by UNI. This European Standard shall be given the status of a
21、 national standard, either by publication of an identical text or by endorsement, at the latest by December 2001, and conflicting national standards shall be withdrawn at the latest by December 2001. This European Standard EN 10263 is subdivided as follows: - Part 1: General technical delivery condi
22、tions; - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working; - Part 3: Technical delivery conditions for case hardening steels; - Part 4: Technical delivery conditions for steels for quenching and tempering; - Part 5: Technical delivery conditions for
23、 stainless steels. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Nethe
24、rlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Page 5 EN 10263-1:2001 BSI 16 December 2002 1Scope 1.1 This part of EN 10263 specifies the general technical delivery conditions for round rod, round bars and wire for cold heading and cold extrusion made of: a)non alloy st
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10263-1-2001 冷加工和冷挤压的钢棒 棍和线.一般交货技术条件 10263 2001 冷加工 挤压 一般 交货 技术 条件
链接地址:https://www.31doc.com/p-3646511.html