BS EN 10324-2004 Steel wire and wire products. Hose reinforcement wire.pdf
《BS EN 10324-2004 Steel wire and wire products. Hose reinforcement wire.pdf》由会员分享,可在线阅读,更多相关《BS EN 10324-2004 Steel wire and wire products. Hose reinforcement wire.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10324:2004 Steel wire and wire products Hose reinforcement wire The European Standard EN 10324:2004 has the status of a British Standard ICS 77.140.65 ? Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:43:49 BST 2006, Uncontrolled Copy, (
2、c) BSI BS EN 10324:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 10 January 2005 BSI 10 January 2005 ISBN 0 580 45216 6 National foreword This British Standard is the official English language version of EN 10324:2004. It supersedes BS
3、 3592-2:1992 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/26, Steel wire, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards
4、 which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “ International Standards Correspondence Index” , or by using the “ Search” facility of the BSI Electronic Catalogue or of British Standards Online. This
5、publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible intern
6、ational/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ti
7、tle page, pages 2 to 13 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:43:49 BST 2006,
8、 Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10324 September 2004 ICS English version Steel wire and wire products - Hose reinforcement wire Fils et produits trfils en acier - Fil darmature pour flexibles Stahldraht und Drahterzeugnisse - Schlaucharmierungsdraht T
9、his European Standard was approved by CEN on 1 July 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referenc
10、es concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into
11、its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L
12、uxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights o
13、f exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10324:2004: E Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:43:49 BST 2006, Uncontrolled Copy, (c) BSI EN 10324:2004 (E) 2 Contents Page Foreword3 1 Scope 4
14、2 Normative references4 3 Terms and definitions .4 4 Classification5 5 Designation and ordering .5 5.1 Designation 5 5.2 Information to be supplied by the purchaser and items to be agreed.5 6 Requirements.6 6.1 Material .6 6.1.1 Steel 6 6.1.2 Chemical composition 6 6.1.3 Wire .6 6.1.4 Coating materi
15、al.6 6.2 Mechanical properties.7 6.2.1 Tensile strength and elongation 7 6.2.2 Reverse bend test7 6.2.3 Torsion test 7 6.3 Surface quality.9 6.3.1 General9 6.3.2 Coating mass .9 6.4 Dimensions and tolerances9 6.4.1 Tolerance on diameter 9 6.4.2 Out of roundness.9 6.5 Delivery conditions9 6.5.1 Unit
16、package.9 6.5.2 Welds 9 6.5.3 Cast of wire.10 7 Testing and inspection10 7.1 Tests and inspection documents.10 7.2 Test procedures.10 7.2.1 Tensile test.10 7.2.2 Reverse bend test and torsion test10 7.2.3 Diameter and out of roundness10 7.3 Coating mass .10 7.4 Retests10 8 Marking, labelling and pac
17、kaging10 Annex A (informative) Packaging of hose reinforcement wire.12 A.1 Recommended types of spool12 A.2 Recommended length of wire per spool .13 Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:43:49 BST 2006, Uncontrolled Copy, (c) BSI ? EN 10324:2004 (E)
18、3 Foreword This document (EN 10324:2004) has been prepared by Technical Committee ECISS/TC 30 “ Steel wire” , the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest
19、by March 2005, and conflicting national standards shall be withdrawn at the latest by March 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic
20、, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Institute Of Technology Tallaght, Institute of Techno
21、logy, Tue Aug 29 10:43:49 BST 2006, Uncontrolled Copy, (c) BSI ? EN 10324:2004 (E) 4 1 Scope This document specifies the composition, dimensions and mechanical properties of high carbon steel wire for reinforcing high pressure hoses. It is applicable to wire used as a multiple parallel wire braided
22、or spirally wrapped reinforcement in a rubber or synthetic hose which is made to withstand relatively high bursting pressure. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For un
23、dated references, the latest edition of the referenced document (including any amendments) applies. EN 10002-1, Metallic materials Tensile testing Part 1: Method of test at ambient temperature EN 10016-1, Non-alloy steel rod for drawing and/or cold rolling Part 1: General requirements EN 10016-2, No
24、n-alloy steel rod for drawing and/or cold rolling Part 2: Specific requirements for general purposes rod EN 10016-4, Non-alloy steel rod for drawing and/or cold rolling Part 4: Specific requirements for rod for special applications EN 10021, General technical delivery requirements for steel and iron
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10324-2004 Steel wire and products. Hose reinforcement 10324 2004 products
链接地址:https://www.31doc.com/p-3646533.html