BS EN 1634-3-2004 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware —Part 3.pdf
《BS EN 1634-3-2004 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware —Part 3.pdf》由会员分享,可在线阅读,更多相关《BS EN 1634-3-2004 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware —Part 3.pdf(22页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 1634-3:2004 Incorporating corrigendum no. 1 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware Part 3: Smoke control test for door and shutter assemblies The European Standard EN 1634-3:2004 has the statu
2、s of a British Standard ICS 13.220.50 ? BS EN 1634-3:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 13 January 2005 BSI 2007 ISBN 0 580 45356 1 National foreword This British Standard was published by BSI. It is the UK implementation of
3、 EN 1634-3:2004, incorporating corrigendum May 2006. It supersedes BS EN 1634-3:2001 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee FSH/22, Fire resistance tests, to Subcommittee FSH/22/5, Test procedures for doors. A list of organizations represente
4、d on FSH/22/5 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued s
5、ince publication Amd. No. DateComments 17090 Corrigendum No. 1 30 April 2007Correction to title EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1634-3 October 2004 ICS 13.220.50Supersedes EN 1634-3:2001 English version Essais de rsistance au feu des portes et fermetures - Partie 3: Portes et vo
6、lets pare-fumes Feuerwiderstandsprfungen fr Tr- und Abschlusseinrichtungen - Teil 3: Rauchschutzabschlsse This European Standard was approved by CEN on 15 July 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Stan
7、dard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French,
8、 German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic
9、, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATIO
10、N EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1634-3:2004: E Incorporating corrigendum May 2006 Fire resistance and smoke control tests f
11、or door and shutter assemblies, openable windows and elements of building hardware - Part 3: Smoke control test for door and shutter assemblies EN 1634-3:2004 (E) 2 Contents Page Foreword. 3 1Scope 4 2Normative references . 4 3Definitions, symbols and designations 4 3.1Terms and definitions. 4 3.2Sy
12、mbols and designation 5 4Test equipment 6 4.1Test apparatus. 6 4.2Instrumentation. 6 5Test conditions 7 6Test specimen . 7 6.1Size. 7 6.2Number. 7 6.3Design and construction 7 6.4Verification. 8 7Installation of test specimen 8 8Conditioning 8 8.1Moisture content. 8 8.2Mechanical conditioning 8 9App
13、lication of instrumentation 9 9.1Thermocouples . 9 9.2Pressure. 9 9.3Air flow. 9 10Test procedure 9 10.1Pre-test procedures 9 10.2Air leakage test 10 10.3Observations . 12 11Expression of results 12 11.1Ambient temperature only test to satisfy Sa classification 12 11.2Ambient together with medium te
14、mperature tests to satisfy Sm. 13 12Test report . 14 13Field of direct application of test results 14 13.1General. 14 13.2Construction of assembly 15 13.3Size and aspect ratio 16 13.4Glazing . 16 13.5Hardware and fittings . 16 13.6Seals. 16 Annex A (informative) Test principle 17 Annex B (informativ
15、e) Test apparatus 18 ? EN 1634-3:2004 (E) 3 Foreword This document (EN 1634-3:2004) has been prepared by Technical Committee CEN/TC 127 “ Fire Safety in Buildings” , the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publicatio
16、n of an identical text or by endorsement, at the latest by April 2005, and conflicting national standards shall be withdrawn at the latest by April 2005. This document has been prepared under mandate given to CEN by the European Commission and the European Free Trade Association, and supports essent
17、ial requirements of the Construction Products Directive. This document supersedes EN 1634-3:2001. EN 1634 Fire resistance tests for door and shutter assemblies consists of the following: Part 1: Fire doors and shutters, Part 2: Fire door hardware - Building hardware for fire resisting doorsets and o
18、penable windows (in course of preparation), Part 3: Smoke control doors and shutters. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, E
19、stonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Caution The attention of all persons concerned with managing and carrying out th
20、is test is drawn to the following. Mechanical and operation hazards may arise during the construction of the test elements or structures, their testing and disposal of test residues. An assessment of all potential hazards and risks to health should be made and safety precautions should be identified
21、 and provided. Written safety instructions should be issued. Appropriate training should be given to relevant personnel. Laboratory personnel should ensure that they follow written safety instructions at all times. ? EN 1634-3:2004 (E) 4 1 Scope This Part of EN 1634 specifies a method for determinin
22、g the leakage of cold and warm smoke from one side of a door assembly to the other under the specified test conditions. The test can be applied to door and shutter assemblies of different types intended for purposes of controlling the passage of smoke in case of fire. This test can also be applied t
23、o lift landing doors and conveyor system doors and shutters. The principle of the test is explained briefly in annex A. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated
24、references, the latest edition of the referenced document (including any amendments) applies. EN 1363-1:1999, Fire resistance tests Part 1: General requirements EN 1634-1:2000, Fire resistance tests for door and shutter assemblies Part 1: Fire doors and shutters EN 13501-2:2003, Fire classification
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 1634-3-2004 Fire resistance and smoke control tests for door shutter assemblies openable windows 1634
链接地址:https://www.31doc.com/p-3646560.html