BS EN 3155-031-2006 航空航天系列.部件连接用电触点.第031部分R级、压接、D型、插座、尺寸12的同轴屏蔽电触点.产品标准.pdf
《BS EN 3155-031-2006 航空航天系列.部件连接用电触点.第031部分R级、压接、D型、插座、尺寸12的同轴屏蔽电触点.产品标准.pdf》由会员分享,可在线阅读,更多相关《BS EN 3155-031-2006 航空航天系列.部件连接用电触点.第031部分R级、压接、D型、插座、尺寸12的同轴屏蔽电触点.产品标准.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 3155-031:2006 Aerospace series Electrical contacts used in elements of connection Part 031: Contacts, electrical, coaxial, shielded, size 12, female, type D, crimp, class R Product standard The European Standard EN 3155-031:2006 has the status of a British Standard ICS 49.060
2、BS EN 3155-031:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2007 BSI 2007 ISBN 978-0-580-49940-1 National foreword This British Standard was published by BSI. It is the UK implementation of EN 3155-031:2006. The UK particip
3、ation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/3, Aerospace Connectors. A list of organizations represented on ACE/6/-/3 can be obtained on request to its secretary. This publication does not purpo
4、rt to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments W - - - - - - - - - - - - 7 7- - 7- -7- - - - - 7-
5、7- - - - - - - - - *- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - W W D - - w - - - - 2 Contents Page Foreword3 Introduction.4 1 Scope 4 2 Normative references4 3 Terms and definitions .5 4 Required characteristics.5 5 Designation 11 6 Marking .11 7 Delivery conditions11 8 Te
6、chnical specification .11 EN 3155-031:2006 3 Foreword This document (EN 3155-031:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard h
7、as received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Ju
8、ne 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rig
9、hts. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvi
10、a, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3155-031:2006 4 Introduction The contacts defined by this standard are derived from those of MIL-C-39029/73, and intermateable with those of MIL-
11、C-39029/74. 1 Scope This standard specifies the required characteristics, tests and tooling applicable to female electrical coaxial contacts, shielded, size 12, type D, crimp, class R, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated
12、 male contacts are defined in EN 3155-030 and EN 3155-040. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (in
13、cluding any amendments) applies. EN 2591-*, Aerospace series Elements of electrical and optical connection Test methods. EN 3155-001, Aerospace series Electrical contacts used in elements of connection Part 001: Technical specification. 1) EN 3155-002, Aerospace series Electrical contacts used in el
14、ements of connection Part 002: List and utilization of contacts. EN 3155-030, Aerospace series Electrical contacts used in elements of connection Part 030: Contacts, electrical, coaxial, shielded, size 12, male, type D, crimp, class R Product standard. EN 3155-040, Aerospace series Electrical contac
15、ts used in elements of connection Part 040: Contacts, electrical, coaxial, size 12, male, type D, solder, class R Product standard. EN 3682-001, Aerospace series Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 C continuo
16、us Part 001: Technical specification. EN 4008-013, Aerospace series Elements of electrical and optical connection Crimping tools and associated accessories Part 013: Positioner for crimping tool M22520/2-01 Product standard. EN 4008-014, Aerospace series Elements of electrical and optical connection
17、 Crimping tools and associated accessories Part 014: Turret for crimping tool M22520/31-01 Product standard. MIL-DTL-22520, Crimping tools, terminal, hand or power actuated, wire termination, and tool kits general specification for. 2) * All parts quoted in this standard. 1) Published as ASD Prestan
18、dard at the date of publication of this standard. 2) Published by: Department of Defense (DOD), The Pentagon, Washington D.C. 20301, USA. EN 3155-031:2006 5 MIL-C-39029/73, Contacts, electrical connectors, socket, solder, removable, shielded, (for MIL-C-83723 series 3, MIL-C-26482 series 2 and MIL-C
19、-83733 connectors). 2) MIL-C-39029/74, Contacts, electrical connectors, pin, solder, removable, shielded, (for MIL-C-83723 series 3, MIL-C-26482 series 2, MIL-C-83733 connectors). 2) MIL-I-81969/14, Installing and removal tools, connector electrical contact, type III, class 2, composition B. 2) TR 6
20、058, Aerospace series Cable code identification list. 3) 3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 3155-001 apply. 4 Required characteristics 4.1 Specific characteristics Type D contacts are for application where contacts with a screening featur
21、e are requested and class R corresponds to an operating temperature range from 65 C to 150 C. 4.2 Dimensions and mass See Figure 1. Dimensions and tolerances are given in millimetres and apply after surface treatment. Figure 1 3) Published as ASD Technical Report at the date of publication of this s
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 3155-031-2006 航空航天系列.部件连接用电触点.第031部分R级、压接、D型、插座、尺寸12的同轴屏蔽电触点.产品标准 3155 031 2006 航空航天 系列 部件 连接 用电
链接地址:https://www.31doc.com/p-3646666.html