BS EN 4639-002-2007 航空航天系列.带可移除调整衬套固定器、1.25直径套圈、多触点、矩形模数光学连接器.第002部分产品标准清单.pdf
《BS EN 4639-002-2007 航空航天系列.带可移除调整衬套固定器、1.25直径套圈、多触点、矩形模数光学连接器.第002部分产品标准清单.pdf》由会员分享,可在线阅读,更多相关《BS EN 4639-002-2007 航空航天系列.带可移除调整衬套固定器、1.25直径套圈、多触点、矩形模数光学连接器.第002部分产品标准清单.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 4639-002:2007 Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 002: List of product standards ICS 49.060 BS EN 4639-002:2007 This British Standard was published under the authority of t
2、he Standards Policy and Strategy Committee on 29 February 2008 BSI 2008 ISBN 978 0 580 56489 5 National foreword This British Standard is the UK implementation of EN 4639-002:2007. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fi
3、bre optic technology, to Panel ACE/6/-/10, Aerospace Fibre optic systems and equipment. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible fo
4、r its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication DateComments W - - - - - - - - 7 7- - - - - - 7 77- - 7 - - - - - - $- D- $ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - W
5、W D - - w - - - - 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .5 4 Product type and codification5 5 Operating conditions.6 5.1 Climatic conditions6 5.2 Mechanical conditions 6 6 Permissible cables.6 7 Contact code7 8 Material of the alignment sleeves 7 9 Conta
6、ct arrangements.7 10 Rear accessories .8 11 Tooling8 12 Assembly and termination instructions8 13 Cleaning instructions8 EN 4639-002:2007 3 Foreword This document (EN 4639-002:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After en
7、quiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a natio
8、nal standard, either by publication of an identical text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at the latest by June 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent righ
9、ts. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Cz
10、ech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 4639-002:2007 4 1 Scope This standard de
11、fines the performance and contact arrangements of rectangular modular optical connectors. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition
12、 of the referenced document (including any amendments) applies. EN 4639-001, Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 001: Technical specification. EN 4639-003, Aerospace series Connectors, optical, r
13、ectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 003: Male optical module Product standard. EN 4639-004, Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 0
14、04: Female optical module Product standard. EN 4639-005, Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 005: Removable alignment sleeve holder Product standard. EN 4639-101, Aerospace series Connectors, opt
15、ical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 101: Optical contact for cable EN 4641-100 Operating temperatures between 65 C and 125 C Product standard. EN 4639-102, Aerospace series Connectors, optical, rectangular, modular, multicontac
16、t, 1,25 diameter ferrule, with removable alignment sleeve holder Part 102: Optical contact for cable EN 4641-102 Operating temperatures between 55 C and 100 C Product standard. EN 4639-103, Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removabl
17、e alignment sleeve holder Part 103: Optical contact for cable EN 4641-101 Operating temperatures between 55 C and 150 C Product standard. 1) EN 4641-100, Aerospace series Cable optical 125 m diameter cladding Part 100: Outer diameter 1,8 mm, tight structure Product standard. 1) EN 4641-101, Aerospac
18、e series Cable optical 125 m diameter cladding Part 101: Outer diameter 0,9 mm Product standard. 1) EN 4641-102, Aerospace series Cable optical 125 m diameter cladding Part 102: Outer diameter 1,8 mm, semi loose structure Product standard. 1) EN 4644-001, Aerospace series Connector, electrical and o
19、ptical, rectangular, modular, rectangular inserts Operating temperature 175 C continuous Part 001: Technical specification. 1) EN 4644-011, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts Operating temperature 175 C continuous Part 011: Male housing size
20、 1, class A, C and E Product standard. 1) EN 4644-012, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts Operating temperature 175 C continuous Part 012: Female housing size 1, class A, C and E Product standard. 1) 1) In preparation at the date of publicat
21、ion of this standard. EN 4639-002:2007 5 EN 4644-013, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts Operating temperature 175 C continuous Part 013: Male housing size 1 with ground blocks, class B and F Product standard. 1) EN 4644-014, Aerospace serie
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 4639-002-2007 航空航天系列.带可移除调整衬套固定器、1.25直径套圈、多触点、矩形模数光学连接器.第002部分产品标准清单 4639 002 2007 航空航天 系列 带可移
链接地址:https://www.31doc.com/p-3646683.html