BS EN 1279-6-2002 Glass in building. Insulating glass units. Factory production control and periodic tests1.pdf
《BS EN 1279-6-2002 Glass in building. Insulating glass units. Factory production control and periodic tests1.pdf》由会员分享,可在线阅读,更多相关《BS EN 1279-6-2002 Glass in building. Insulating glass units. Factory production control and periodic tests1.pdf(72页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 1279-6:2002 Glass in building Insulating glass units Part 6: Factory production control and periodic tests The European Standard EN 1279-6:2002 has the status of a British Standard ICS 81.040.20 ? BS EN 1279-6:2002 This British Standard, having been prepared under the directio
2、n of the Building and Civil Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 12 July 2002 BSI 12 July 2002 ISBN 0 580 40109 X National foreword This British Standard is the official English language version of EN 12
3、79-6:2002. The UK participation in its preparation was entrusted by Technical Committee B/520, Glass and glazing in building, to Subcommittee B/520/2, Insulating glass products, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to it
4、s secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic
5、 Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to unde
6、rstand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document compris
7、es a front cover, an inside front cover, the EN title page, pages 2 to 69 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12
8、79-6 July 2002 ICS 81.040.20 English version Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests Verre dans la construction - Vitrage isolant prfabriqu scell - Partie 6: Contrle de production en usine et essais priodiques Glas im Bauwesen - Mehrscheiben
9、-Isolierglas - Teil 6: Werkseigene Produktionskontrolle und Auditprfungen This European Standard was approved by CEN on 5 March 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national st
10、andard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other l
11、anguage made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
12、 Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of
13、 exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1279-6:2002 E EN 1279-6:2002 (E) 2 Contents page Foreword 3 1Scope 3 2Normative references 4 3Terms and definitions 4 4Quality assurance and factory production control 5 5Factory production control re
14、quirements 5 6Handling, storage, packaging and delivery 8 7Training of personnel 9 Annex A (normative) Inspection and testing tables of insulating glass units 9 Annex B (normative)Periodic testing and inspections45 Annex C (normative)Fogging test49 Annex D (informative) Two component sealants, check
15、 on the thoroughness of mixing55 Annex E (informative) Sealants, hardness measurements57 Annex F (informative) Seals, adherence measurements60 Annex G (informative) Volatile test64 Annex H (informative) Tightness check of hollow spacer closed by welding on the back 65 Annex J(informative) Adhesion t
16、est for leaded light strip66 Annex K (informative) Desiccant, adsorption capacity check68 Bibliography69 w w w . b z f x w . c o m EN 1279-6:2002 (E) 3 Foreword This document EN 1279-6:2002 has been prepared by Technical Committee CEN/TC 129 “Glass in building“, the secretariat of which is held by I
17、BN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2003, and conflicting national standards shall be withdrawn at the latest by January 2003. The described testing and inspections are par
18、t of routine production of insulating glass units. This Part of the standard does not stand alone, it is part of one standard: prEN 1279-1, Glass in building - Insulating glass units - Part 1: Generalities, dimensional tolerances and rules for the system description. prEN 1279-2, Glass in building -
19、 Insulating glass units - Part 2: Long term test method and requirements on moisture vapour penetration. prEN 1279-3, Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances. EN 1279-4, Glass in building -
20、Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals. prEN 1279-5, Glass in building - Insulating glass units - Part 5: Evaluation of conformity. EN 1279-6, Glass in building - Insulating glass units - Part 6 Factory production control and periodic tests. The an
21、nexes A, B and C are normative. The annexes D, E, F, G, H, J and K are informative. This standard includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgiu
22、m, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 1Scope This European Standard is the product standard for insulating glass units, which defines insulating glass
23、 units, and ensures by means of an adequate evaluation of conformity to this standard that over time: energy savings are made because the U-value and solar factor do not change significantly; health is preserved because sound reduction and vision do not change significantly; safety is provided becau
24、se mechanical resistance does not change significantly. It covers additional characteristics that are of importance for trade. Marking conditions are included. w w w . b z f x w . c o m EN 1279-6:2002 (E) 4 For glass products with electrical wiring or connections for e.g. alarm or heating purposes,
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 1279-6-2002 Glass in building. Insulating units. Factory production control and periodic tests1 1279
链接地址:https://www.31doc.com/p-3646732.html