BS EN 1218-4-2004 Safety of woodworking machines — Tenoning machines — Part 4 Edge banding machines fed by chain(s).pdf
《BS EN 1218-4-2004 Safety of woodworking machines — Tenoning machines — Part 4 Edge banding machines fed by chain(s).pdf》由会员分享,可在线阅读,更多相关《BS EN 1218-4-2004 Safety of woodworking machines — Tenoning machines — Part 4 Edge banding machines fed by chain(s).pdf(50页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 1218-4:2004 Safety of woodworking machines Tenoning machines Part 4: Edge banding machines fed by chain(s) The European Standard EN 1218-4:2004 has the status of a British Standard ICS 79.120.10 ? Copyright British Standards Institution Reproduced by IHS under license with BSI
2、 - Uncontrolled Copy Document provided by IHS Licensee=Bureau Veritas/5959906001, 11/08/2004 00:48:32 MST Questions or comments about this message: please call the Document Policy Group at 303-397-2295. -,-,- BS EN 1218-4:2004 This British Standard was published under the authority of the Standards
3、Policy and Strategy Committee on 23 July 2004 BSI 23 July 2004 ISBN 0 580 44148 2 National foreword This British Standard is the official English language version of EN 1218-4:2004. The UK participation in its preparation was entrusted to Technical Committee MTE/23, Woodworking machines Safety, whic
4、h has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the secti
5、on entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Co
6、mpliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor rela
7、ted international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 46, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the do
8、cument was last issued. Amendments issued since publication Amd. No. DateComments Copyright British Standards Institution Reproduced by IHS under license with BSI - Uncontrolled Copy Document provided by IHS Licensee=Bureau Veritas/5959906001, 11/08/2004 00:48:32 MST Questions or comments about this
9、 message: please call the Document Policy Group at 303-397-2295. -,-,- EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1218-4 July 2004 ICS 79.120.10 English version Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) Scurit des machines pour le tr
10、avail du bois - Tenonneuses - Partie 4: Machines plaquer sur chant chane(s) Sicherheit von Holzbearbeitungsmaschinen - Zapfenschneid- und Schlitzmaschinen - Teil 4: Kantenanleimmaschinen mit Kettenbandvorschub This European Standard was approved by CEN on 24 March 2004. CEN members are bound to comp
11、ly with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Sec
12、retariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the off
13、icial versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Swe
14、den, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members
15、. Ref. No. EN 1218-4:2004: E Copyright British Standards Institution Reproduced by IHS under license with BSI - Uncontrolled Copy Document provided by IHS Licensee=Bureau Veritas/5959906001, 11/08/2004 00:48:32 MST Questions or comments about this message: please call the Document Policy Group at 30
16、3-397-2295. -,-,- EN 1218-4:2004 (E) 2 Contents page Foreword4 Introduction.5 1 Scope 6 2 Normative references6 3 Terms and definitions .8 3.1 General8 3.2 Terms 8 3.3 Definitions 10 4 List of hazards12 5 Safety requirements and/or measures 14 5.1 General14 5.2 Controls 14 5.2.1 Safety and reliabili
17、ty of control systems.14 5.2.2 Position of controls.15 5.2.3 Starting .16 5.2.4 Stop controls16 5.2.5 Emergency stop.17 5.2.6 Integrated feed.17 5.2.7 Mode selection.18 5.2.8 Speed changing.19 5.2.9 Control duplication19 5.2.10 Failure of the power supply19 5.2.11 Failure of the control circuits.19
18、5.3 Protection against mechanical hazards20 5.3.1 Stability.20 5.3.2 Risk of break-up during operation.20 5.3.3 Tool holder and tool design20 5.3.4 Braking22 5.3.5 Devices to minimise the possibility or the effect of ejection24 5.3.6 Work-piece supports and guides.24 5.3.7 Prevention of access to mo
19、ving parts.24 5.4 Protection against non-mechanical hazards 31 5.4.1 Fire 31 5.4.2 Noise .32 5.4.3 Emission of chips, and dust.33 5.4.4 Electricity33 5.4.5 Ergonomics and Handling33 5.4.6 Lighting.34 5.4.7 Pneumatics.34 5.4.8 Hydraulics.34 5.4.9 Heat .34 5.4.10 Substances.34 5.4.11 Radiation.34 5.4.
20、12 Static Electricity.34 5.4.13 Errors of fitting.35 5.4.14 Isolation 35 5.4.15 Maintenance.35 6 Information for use35 6.1 Warning devices 35 Copyright British Standards Institution Reproduced by IHS under license with BSI - Uncontrolled Copy Document provided by IHS Licensee=Bureau Veritas/59599060
21、01, 11/08/2004 00:48:32 MST Questions or comments about this message: please call the Document Policy Group at 303-397-2295. -,-,- w w w . b z f x w . c o m EN 1218-4:2004 (E) 3 6.2 Marking.36 6.3 Instruction handbook36 Annex A (informative) Examples of safety related control systems.39 Annex B (nor
22、mative) Tool spindle dimensional tolerances.43 Annex C (informative) Safe working practice44 Annex ZA (informative) Relationship of this document with EC Directives.45 Bibliography46 Copyright British Standards Institution Reproduced by IHS under license with BSI - Uncontrolled Copy Document provide
23、d by IHS Licensee=Bureau Veritas/5959906001, 11/08/2004 00:48:32 MST Questions or comments about this message: please call the Document Policy Group at 303-397-2295. -,-,- w w w . b z f x w . c o m EN 1218-4:2004 (E) 4 Foreword This document (EN 1218-4:2004) has been prepared by the Technical Commit
24、tee CEN/TC 142 “Woodworking machines -Safety“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2005, and conflicting national standards shall be wi
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 1218-4-2004 Safety of woodworking machines Tenoning Part Edge banding fed by chains 1218 2004
链接地址:https://www.31doc.com/p-3646761.html