BS EN 1337-10-2003 Structural bearings. Inspection and maintenance.pdf
《BS EN 1337-10-2003 Structural bearings. Inspection and maintenance.pdf》由会员分享,可在线阅读,更多相关《BS EN 1337-10-2003 Structural bearings. Inspection and maintenance.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 1337-10:2003 Corrected and reprinted November 2003 Structural bearings Part 10: Inspection and maintenance The European Standard EN 1337-10:2003 has the status of a British Standard ICS 91.010.30 ? BS EN 1337-10:2003 This British Standard, was published under the authority of
2、the Standards Policy and Strategy Committee on 24 July 2003 BSI 5 November 2003 ISBN 0 580 42319 0 National foreword This British Standard is the official English language version of EN 1337-10:2003. The UK participation in its preparation was entrusted to Technical Committee B/522, Structural beari
3、ngs, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under
4、the section entitled “ International Standards Correspondence Index” , or by using the “ Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct app
5、lication. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;
6、monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 17, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates
7、 when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1337-10 July 2003 ICS 91.010.30 English version Structural Bearings - Part 10: Inspection and maintenance Appareils dappui structuraux - Partie 10: Surve
8、illanceLager im Bauwesen - Teil 10: Inspektion und Instandhaltung This European Standard was approved by CEN on 12 June 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard w
9、ithout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language
10、made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary
11、, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAl
12、l rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1337-10:2003 E EN 1337-10:2003 (E) 2 Contents page Foreword. 3 1Scope 4 2Normative references . 4 3Definitions and symbols. 4 4General requirements for regular and principal inspections . 5
13、 5Regular inspection 5 6Principal inspection 6 7 Servicing and replacement . 10 Annex A (informative) Explanations. 11 Annex B (informative) Report of inspection of bearings. 12 ? EN 1337-10:2003 (E) 3 Foreword This document (EN 1337-10:2003) has been prepared by Technical Committee CEN /TC 167 “Str
14、uctural bearings“, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2004, and conflicting national standards shall be withdrawn at the latest by Jan
15、uary 2004. The entire European Standard EN 1337 consists of 11 Parts listed here below: Part 1 General design rules Part 2 Sliding elements Part 3Elastomeric bearings Part 4 Roller bearings Part 5Pot bearings Part 6Rocker bearings Part 7Spherical and cylindrical PTFE bearings Part 8Guide bearings an
16、d restraint bearings Part 9 Protection Part 10 Inspection and maintenance Part 11 Transport, storage and installation Annexes A and B are informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europe
17、an Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. ? EN 1337-10:2003 (E) 4 1 Scope This European Standard applies to
18、 the inspection and maintenance of bearings designed in accordance with EN 1337-1, when used in the construction of bridges or structures requiring similar bearing systems. It presupposes the existence of guidelines for the regular inspection of the whole structure during its service life. It may al
19、so be used as appropriate for the inspection and maintenance of bearings designed and/or installed before the introduction of this European Standard. This European Standard specifies the aspects of each type of bearing that shall be inspected and recorded. It does not specify permissible values. For
20、 these reference shall be made to the relevant parts of this European Standard and to the drawings and design calculations for the bearing and the structure. NOTE 1Attention is drawn to the particular necessity for regular inspection and maintenance of bearings as, without such inspection and mainte
21、nance, premature failure may occur. NOTE 2National regulations may exist on the subjects covered by this European Standard and, therefore, they prevail on it. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative
22、 references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated reference
23、s the latest edition of the publication referred to applies (including amendments). EN 13371:2000, Structural bearings Part 1: General design rules. EN 133711: 1997, Structural bearings Part 11: Transport, storage and installation. 3 Definitions and symbols For the purposes of this European Standard
24、 the following terms and definitions apply: 3.1 inspection regular observation, noting and reporting 3.1.1 regular inspection close visual inspection without measurements, spaced at equal, resonably frequent, intervals 3.1.2 principal inspection similar to a regular inspection but in more detail and
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 1337-10-2003 Structural bearings. Inspection and maintenance 1337 10 2003 bearings
链接地址:https://www.31doc.com/p-3646795.html