BS EN 3155-066-2006 航空航天系列.部件连接用电触点.尺寸8、S级、压接、A型、插座电触点.产品标准.pdf
《BS EN 3155-066-2006 航空航天系列.部件连接用电触点.尺寸8、S级、压接、A型、插座电触点.产品标准.pdf》由会员分享,可在线阅读,更多相关《BS EN 3155-066-2006 航空航天系列.部件连接用电触点.尺寸8、S级、压接、A型、插座电触点.产品标准.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 3155-066:2006 Aerospace series Electrical contacts used in elements of connection Part 066: Contacts, electrical, female, type A, crimp, class S, size 8 Product standard The European Standard EN 3155-066:2006 has the status of a British Standard ICS 49.060 BS EN 3155-066:2006
2、This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2006 BSI 2006 ISBN 0 580 49440 3 National foreword This British Standard was published by BSI. It is the UK implementation of EN 3155-066:2006. The UK participation in its preparation
3、 was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/3, Aerospace Connectors. A list of organizations represented on ACE/6/-/3 can be obtained on request to its secretary. This publication does not purport to include all the ne
4、cessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments W - - - - - - - - - - - 7 7- - 7- -7- - - - - 7- - - - - - - - - *A - - - -
5、 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - W W D - - w - - - - 2 Contents Page Foreword3 Introduction.4 1 Scope 4 2 Normative references4 3 Definitions 5 4 Required characteristics.5 4.1 Specific characteristics.5 4.2 Dimensions and mass.5 4.3 Marking by colour code 6 4.4 Material, s
6、urface treatment.6 4.5 Permissible cables 6 4.6 Tooling6 4.7 Cable stripping.7 4.8 Tests7 4.9 Gauges7 5 Designation 8 6 Marking 10 7 Technical specification 10 EN 3155-066:2006 3 Foreword This European Standard (EN 3155-066:2006) has been prepared by the AeroSpace and Defense Industries Association
7、of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This Europe
8、an Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility that some of the eleme
9、nts of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Eur
10、opean Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
11、 EN 3155-066:2006 4 Introduction This standard specifies the characteristics of female crimp contacts. 1 Scope This standard specifies the required characteristics, tests and tooling applicable to female electrical contacts, type A, crimp, class S, size 8, used in elements of connection according to
12、 EN 3155-002. It shall be used together with EN 3155-001. The associated male contacts are defined in EN 3155-065. 2 Normative references The following referenced documents are indispensable fort he application of this document. For dated references, only the edition cited applies. For undated refer
13、ences, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series Copper or copper alloy conductors for electrical cables Product standard EN 2591 (all parts), Aerospace series Element of electrical and optical connection Test methods EN 3155-001, Aer
14、ospace series Electrical contacts used in elements of connection Part 001: Technical specification1) EN 3155-002, Aerospace series Electrical contacts used in elements of connection Part 002: List and utilization of contacts EN 3155-065, Aerospace series Electrical contacts used in elements of conne
15、ction Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 Product standard EN 4530-004, Aerospace series Electrical contacts used in elements of connection Part 004: Sealing sleeve Product standard MIL-C-22520/23, Crimping Tools, Terminal, Hand or Power Actuated, Wire Termination: P
16、neumatic Tool for Wire Barrel Sizes 0000 Through 82) MIL-DTL-22520G, Crimping Tools, Wire Termination, General Specification for MIL-I-81969B, Installing and Removal Tools, Connector Electrical Contacts, Typy II, Class 2, Composition C MIL-I-81969/14C, Installing and Removal Tools, Connector Electri
17、cal Contact, Type III, Class 2, Composition B 1) Published at ASD Prestandard at the date of publication of this standard. 2) Published by: Department of Defense (DOD), the Pentagon, Washington D.C. 20301 USA. EN 3155-066:2006 5 3 Definitions For the purposes of this standard, the definitions in EN
18、3155-001 apply. 4 Required characteristics 4.1 Specific characteristics Type A contacts are for general application and class S corresponds to an operating temperature range from -65 C to 200 C. 4.2 Dimensions and mass See Figure 1 and Table 1. Dimensions and tolerances are given in millimetres and
19、apply after surface treatment. Dimensions in millimetres NOTE Point of which a square ended gauge pin of the same diameter as the mating contact first engages the female contact spring member. Figure 1 EN 3155-066:2006 6 Table 1 Size Contact Barrel A B Mass g max. 08 08 5,45 5,60 4,50 4,65 5,2 08 10
20、 4,60 4,68 3,48 3,56 5,2 4.3 Marking by colour code Not applicable. 4.4 Material, surface treatment Body material: copper alloy. Surface treatment: gold on appropriate undercoat. 4.5 Permissible cables See Table 2. Table 2 Size Size of conductors Contact Barrel AECMA code Section mm AWG a Rated test
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 3155-066-2006 航空航天系列.部件连接用电触点.尺寸8、S级、压接、A型、插座电触点.产品标准 3155 066 2006 航空航天 系列 部件 连接 用电 触点 尺寸 压接 插座
链接地址:https://www.31doc.com/p-3646853.html