BS EN 1846-3-2008 Firefighting and rescue service vehicles — Part 3 Permanently installed equipment — Safety and performance.pdf
《BS EN 1846-3-2008 Firefighting and rescue service vehicles — Part 3 Permanently installed equipment — Safety and performance.pdf》由会员分享,可在线阅读,更多相关《BS EN 1846-3-2008 Firefighting and rescue service vehicles — Part 3 Permanently installed equipment — Safety and performance.pdf(40页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 1846-3:2002 Firefighting and rescue service vehicles Part 3: Permanently installed equipment Safety and performance ICS 13.220.10 ? +A1:2008 National foreword This British Standard is the UK implementation of EN 1846-3:2002+ A1:2008. It supersedes BS EN 1846-3:2002 which is wi
2、thdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. The UK participation in its preparation was entruste
3、d by Technical Committee FSH/17, Fire brigade equipment, to Subcommittee FSH/17/3, Fire appliances. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are
4、 responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 1846-3:2002+A1:2008 Amendments/corrigenda issued since publication Date Comments 30 June 2009Implementation of CEN amendment A1:2008 This British Standard was published u
5、nder the authority of the Standards Policy and Strategy Committee on 11 February 2004 BSI 2009 ISBN 978 0 580 62036 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1846-3:2002+A1 September 2008 ICS 13.220.10Supersedes EN 1846-3:2002 English Version Firefighting and rescue service vehicles - P
6、art 3: Permanently installed equipment - Safety and performance Vhicules des services de secours et de lutte contre lincendie - Partie 3: Equipements installs demeure - Scurit et performances Feuerwehrfahrzeuge - Teil 3: Fest eingebaute Ausrstung - Sicherheits- und Leistungsanforderungen This Europe
7、an Standard was approved by CEN on 9 September 2002 and includes Amendment 1 approved on 30 July 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
8、Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
9、 under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gre
10、ece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Managem
11、ent Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1846-3:2002+A1:2008: E EN 1846-3:2002+A1:2008 (E) 2 Contents page Foreword4 Introduction.5 1Scope 6 2Normative references7 3Terms
12、and definitions .8 4List of significant hazards 10 4.1Water installation.10 4.2Additive installation.12 4.3Monitor14 4.4Equipment gantries .15 5Requirements.16 5.1General16 5.2Safety requirements and/or protective measures16 5.2.1General16 5.2.2Water installation.16 5.2.3Additive installation.18 5.2
13、.4Monitor18 5.2.5Equipment gantries .19 5.3Performance requirements.19 5.3.1General19 5.3.2Water installation.19 5.3.3Additive installation.23 5.3.4Monitor25 5.3.5Equipment gantries .25 6Verification .26 6.1General26 6.2Verification of the safety requirements and/or measures.26 6.2.1General26 6.2.2W
14、ater installation.26 6.2.3Additive installation.27 6.2.4Monitor28 6.2.5Equipment gantries .28 6.3Verification of the performance requirements28 6.3.1General28 6.3.2Water installation.29 6.3.3Additive installation.30 6.3.4Monitor31 6.3.5Equipment gantries .31 7Information for use32 7.1General32 7.2Es
15、sential information and marking relevant to safety.32 7.3Information and marking relevant to performance 32 Annex A (informative) Monitor throw measurement34 BS EN 1846-3:2002+A1:2008 ? EN 1846-3:2002+A1:2008 (E) 3 Annex ZA (informative) !Relationship between this European Standard and the Essential
16、 Requirements of EU Directive 98/37EC“35 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“.36 Bibliography37 BS EN 1846-3:2002+A1:2008 ? EN 1846-3:2002+A1:2008 (E) 4 Foreword This document (EN 1846-3:2002+A1:2008) has been
17、prepared by Technical Committee CEN/TC 192 “Fire service equipment“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2009, and conflicting national s
18、tandards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2008-07-30. This document supersedes EN 1846-3:2002. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. The CEN/TC 192 entrusted the d
19、rafting of this standard to CEN/TC 192/WG3 “Firefighting and rescue service vehicles“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of !EU Directive(s)“. !For relationship with EU
20、Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ EN 1846 “Firefighting and rescue service vehicles“ is composed of three parts: Part 1: Nomenclature and designation; Part 2: Common requirements - Safety and performance; Part 3: Permanently installed equipm
21、ent - Safety and performance. Annex A is for information only. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finla
22、nd, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 1846-3:2002+A1:2008 ? EN 1846-3:2002+A1:2008 (E) 5 Introduction This document
23、is a type C standard as stated in !EN ISO 12100-1:2003“. This document is a complement to EN 1846-2 and deals with some optional specific permanently installed equipment used by firefighters. The equipment concerned and the extent to which hazards, hazardous situations and events are covered are ind
24、icated in the scope of this document. NOTE Other equipment not covered by this document can be dealt with later in another part, depending on the decision of CEN. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 1846-3-2008 Firefighting and rescue service vehicles Part Permanently installed equipment Safety 1846
链接地址:https://www.31doc.com/p-3647001.html